Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userModeling hydrodynamics, magnetic fields and synthetic radiographs for high-energy-density plasma flows in shock-shear targets
103
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Three-dimensional FLASH radiation-magnetohydrodynamics (radiation-MHD) modeling is carried out to study the hydrodynamics and magnetic fields in the shock-shear derived platform. Simulations indicate that fields of tens of Tesla can be generated via Biermann battery effect due to vortices and mix in the counter-propagating shock-induced shear layer. Synthetic proton radiography simulations using MPRAD and synthetic X-ray image simulations using SPECT3D are carried out to predict the observable features in the diagnostics. Quantifying the effects of magnetic fields in inertial confinement fusion (ICF) and high-energy-density (HED) plasmas represents frontier research that has far-reaching implications in basic and applied sciences.
rate research
Read More
Plasma shock waves widely exist and play an important role in high-energy-density environment, especially in the inertial confinement fusion. Due to the large gradient of macroscopic physical quantities and the coupled thermal, electrical, magnetic and optical phenomena, there exist not only hydrodynamic non-equilibrium (HNE) effects, but also strong thermodynamic non-equilibrium (TNE) effects around the wavefront. In this work, a two-dimensional single-fluid discrete Boltzmann model is proposed to investigate the physical structure of ion shock. The electron is assumed inertialess and always in thermodynamic equilibrium. The Rankine-Hugoniot relations for single fluid theory of plasma shock wave is derived. It is found that the physical structure of shock wave in plasma is significantly different from that in normal fluid and somewhat similar to that of detonation wave from the sense that a peak appears in the front. The non-equilibrium effects around the shock front become stronger with increasing Mach number. The charge of electricity deviates oppositely from neutrality in upstream and downstream of the shock wave. The large inertia of the ions causes them to lag behind, so the wave front charge is negative and the wave rear charge is positive. The variations of HNE and TNE with Mach number are numerically investigated. The characteristics of TNE can be used to distinguish plasma shock wave from detonation wave.
In tokamak transport barriers, the radial scale of profile variations can be comparable to a typical ion orbit width, which makes the coupling of the distribution function across flux surfaces important in the collisional dynamics. We use the radially global steady-state neoclassical {delta}f code Perfect to calculate poloidal and toroidal flows, and radial fluxes, in the pedestal. In particular, we have studied the changes in these quantities as the plasma composition is changed from a deuterium bulk species with a helium impurity to a helium bulk with a deuterium impurity, under specific profile similarity assumptions. The poloidally resolved radial fluxes are not divergence-free in isolation in the presence of sharp radial profile variations, which leads to the appearance of poloidal return-flows. These flows exhibit a complex radial-poloidal structure that extends several orbit widths into the core and is sensitive to abrupt radial changes in the ion temperature gradient. We find that a sizable neoclassical toroidal angular momentum transport can arise in the radially global theory, in contrast to the local.
High-throughput plasma separation based on atomic mass holds the promise for offering unique solutions to a variety of high-impact societal applications. Through the mass differential effects they exhibit, crossed-field configurations can in principle be exploited in various ways to separate ions based on atomic mass. Yet, the practicality of these concepts is conditioned upon the ability to drive suitable crossed-field flows for plasma parameters compatible with high-throughput operation. Limited current predictive capabilities have not yet made it possible to confirm this possibility. Yet, past experimental results suggest that end-electrodes biasing may be effective, at least for certain electric field values. A better understanding of cross-field conductivity is needed to confirm these results and confirm the potential of crossed-field configurations for high-throughput separation.
This paper presents the conceptual design of a high-voltage pulser intended to generate 30-T magnetic fields for magneto-inertial fusion experiments at the OMEGA facility. The pulser uses a custom capacitor bank and two externally triggered spark gaps to drive a multi-turn coil. This new high-voltage pulser is capable of storing 10 times more energy than the previous system, using a higher charge voltage (from 20 to 30 kV) and a larger capacitance (from 1 {mu}F to 5 {mu}F). Circuit simulations show that this pulser can deliver 100 kA into a 60-nH, 14-m{Omega} coil with a rise time of 1 {mu}s. For a coil with 2 turns with an average coil diameter of 7.8 mm, this current translates into a 32-T peak magnetic field at coil center. This is a factor of three increase in the peak magnetic field compared to the present generator magnetic field capabilities.
Two-dimension Particle-in-cell simulations for laser plasma interaction with laser intensity of $10^{16} W/cm^2$, plasma density range of 0.01-0.28$n_c$ and scale length of $230 -330 mu m$ showed significant pump depletion of the laser energy due to stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) in the low density region ($n_e=0.01-0.2 n_c$). The simulations identified hot electrons generated by SRS in the low density region with moderate energy and by two-plasmon-decay (TPD) near $n_e=0.25n_c$ with higher energy. The overall hot electron temperature (46 keV) and conversion efficiency (3%) were consistent with the experiment measurements. The simulations also showed artificially reducing SBS would lead to stronger SRS and a softer hot electron spectrum.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
