No Arabic abstract
Digital-to-analog converters (DAC) are indispensable functional units in signal processing instrumentation and wide-band telecommunication links for both civil and military applications. Since photonic systems are capable of high data throughput and low latency, an increasingly found system limitation stems from the required domain-crossing such as digital-to-analog, and electronic-to-optical. A photonic DAC implementation, in contrast, enables a seamless signal conversion with respect to both energy efficiency and short signal delay, often require bulky discrete optical components and electric-optic transformation hence introducing inefficiencies. Here, we introduce a novel coherent parallel photonic DAC concept along with an experimental demonstration capable of performing this digital-to-analog conversion without optic-electric-optic domain crossing. This design hence guarantees a linear intensity weighting among bits operating at high sampling rates, yet at a reduced footprint and power consumption compared to other photonic alternatives. Importantly, this photonic DAC could create seamless interfaces of next-generation data processing hardware for data-centers, task-specific compute accelerators such as neuromorphic engines, and network edge processing applications.
With recent rapid advances in photonic integrated circuits, it has been demonstrated that programmable photonic chips can be used to implement artificial neural networks. Convolutional neural networks (CNN) are a class of deep learning methods that have been highly successful in applications such as image classification and speech processing. We present an architecture to implement a photonic CNN using the Fourier transform property of integrated star couplers. We show, in computer simulation, high accuracy image classification using the MNIST dataset. We also model component imperfections in photonic CNN and show that the performance degradation can be recovered in a programmable chip. Our proposed architecture provides a large reduction in physical footprint compared to current implementations as it utilizes the natural advantages of optics and hence offers a scalable pathway towards integrated photonic deep learning processors.
A high-rate yet low-cost air-to-ground (A2G) communication backbone is conceived for integrating the space and terrestrial network by harnessing the opportunistic assistance of the passenger planes or high altitude platforms (HAPs) as mobile base stations (BSs) and millimetre wave communication. The airliners act as the network-provider for the terrestrial users while relying on satellite backhaul. Three different beamforming techniques relying on a large-scale planar array are used for transmission by the airliner/HAP for achieving a high directional gain, hence minimizing the interference among the users. Furthermore, approximate spectral efficiency (SE) and area spectral efficiency (ASE) expressions are derived and quantified for diverse system parameters.
Photonic analog to digital conversion offers promise to overcome the signal-to-noise ratio (SNR) and sample rate trade-off in conventional analog to digital converters (ADCs), critical for modern digital communications and signal analysis. We propose using phase-stable dual frequency combs with a fixed frequency spacing offset to downconvert spectral slices of a broadband signal and enable high resolution parallel digitization. To prove the concept of our proposed method, we demonstrate the detection of a 10-GHz subcarrier modulated (SCM) signal using 500-MHz bandwidth ADCs by optically converting the SCM signal to ten 1-GHz bandwidth signals that can be processed in parallel for full signal detection and reconstruction. Using sinusoidal wave based standard ADC testing, we demonstrate a spurious-free dynamic range (SFDR) of >45dB and signal-to-noise-and-distortion (SINAD) of >20dB, only limited by the receiver front-end design. Our experimental investigation reveals that this SINAD limitation can be overcome by improved receiver design, promising high resolution ADC for broadband signals.
In a growing number of applications, there is a need to digitize signals whose spectral characteristics are challenging for traditional Analog-to-Digital Converters (ADCs). Examples, among others, include systems where the ADC must acquire at once a very wide but sparsely and dynamically occupied bandwidth supporting diverse services, as well as systems where the signal of interest is subject to strong narrowband co-channel interference. In such scenarios, the resolution requirements can be prohibitively high. As an alternative, the recently proposed modulo-ADC architecture can in principle require dramatically fewer bits in the conversation to obtain the target fidelity, but requires that information about the spectrum be known and explicitly taken into account by the analog and digital processing in the converter, which is frequently impractical. To address this limitation, we develop a blind version of the architecture that requires no such knowledge in the converter, without sacrificing performance. In particular, it features an automatic modulo-level adjustment and a fully adaptive modulo unwrapping mechanism, allowing it to asymptotically match the characteristics of the unknown input signal. In addition to detailed analysis, simulations demonstrate the attractive performance characteristics in representative settings.
The influence on $gamma$-ray spectra of differential nonlinearities (DNL) in subranging, pipelined analog-to-digital converts (ADCs) used for digital $gamma$-ray spectroscopy was investigated. The influence of the DNL error on the $gamma$-ray spectra, depending on the input count-rate and the dynamic range has been investigated systematically. It turned out, that the DNL becomes more significant in $gamma$-ray spectra with larger dynamic range of the spectroscopy system. An event-by-event offline correction algorithm was developed and tested extensively. This correction algorithm works especially well for high dynamic ranges.