Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFriction-induced instability and vibration in a precision motion stage with a friction isolator
81
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Motion stages are widely used for precision positioning in manufacturing and metrology applications. However, they suffer from nonlinear premotion (i.e. static) friction, which adversely affects their speed and motion precision. In this article, a friction isolator is used as a simple and robust solution to mitigate the undesirable effects of premotion friction in precision motion stages. For the first time, a theoretical study is carried out to understand the dynamic phenomena associated with using a friction isolator on a motion stage. Theoretical analysis and numerical simulation are conducted to examine the dynamical effects of friction isolator on a proportional-integral-derivative-controlled motion stage under LuGre friction dynamics. The influence of friction isolator on the response and stability of the system is examined through theoretical and numerical analyses. Parametric analysis is also carried out to study the effects of friction isolator and friction parameters on the eigenvalue and stability characteristics. The numerical results validate the theoretical findings and demonstrate several other interesting nonlinear phenomena associated with the introduction of friction isolator. This motivates deeper nonlinear dynamical analyses of friction isolator for precision motion control.
rate research
Read More
Shear banding and stick-slip instabilities have been long observed in sheared granular materials. Yet, their microscopic underpinnings, interdependencies and variability under different loading conditions have not been fully explored. Here, we use a non-equilibrium thermodynamics model, the Shear Transformation Zone theory, to investigate the dynamics of strain localization and its connection to stability of sliding in sheared, dry, granular materials. We consider frictional and frictionless grains as well as presence and absence of acoustic vibrations. Our results suggest that at low and intermediate strain rates, persistent shear bands develop only in the absence of vibrations. Vibrations tend to fluidize the granular network and de-localize slip at these rates. Stick-slip is only observed for frictional grains and it is confined to the shear band. At high strain rates, stick-slip disappears and the different systems exhibit similar stress-slip response. Changing the vibration intensity, duration or time of application alters the system response and may cause long-lasting rheological changes. We analyse these observations in terms of possible transitions between rate strengthening and rate weakening response facilitated by a competition between shear induced dilation and vibration induced compaction. We discuss the implications of our results on dynamic triggering, quiescence and strength evolution in gouge filled fault zones.
We study quantum dissipative effects that result from the non-relativistic motion of an atom, coupled to a quantum real scalar field, in the presence of a static imperfect mirror. Our study consists of two parts: in the first, we consider accelerated motion in free space, namely, switching off the coupling to the mirror. This results in motion induced radiation, which we quantify via the vacuum persistence amplitude. In the model we use, the atom is described by a quantum harmonic oscillator (QHO). We show that its natural frequency poses a threshold which separates different regimes, involving or not the internal excitation of the oscillator, with the ulterior emission of a photon. At higher orders in the coupling to the field, pairs of photons may be created by virtue of the Dynamical Casimir Effect (DCE). In the second part, we switch on the coupling to the mirror, which we describe by localized microscopic degrees of freedom. We show that this leads to the existence of quantum contactless friction as well as to corrections to the free space emission considered in the first part. The latter are similar to the effect of a dielectric on the spontaneous emission of an excited atom. We have found that, when the atom is accelerated and close to the plate, it is crucial to take into account the losses in the dielectric in order to obtain finite results for the vacuum persistence amplitude.
The interplay between Coulomb friction and random excitations is studied experimentally by means of a rotating probe in contact with a stationary granular gas. The granular material is independently fluidized by a vertical shaker, acting as a heat bath for the Brownian-like motion of the probe. Two ball bearings supporting the probe exert nonlinear Coulomb friction upon it. The experimental velocity distribution of the probe, autocorrelation function, and power spectra are compared with the predictions of a linear Boltzmann equation with friction, which is known to simplify in two opposite limits: at high collision frequency, it is mapped to a Fokker-Planck equation with nonlinear friction, whereas at low collision frequency, it is described by a sequence of independent random kicks followed by friction-induced relaxations. Comparison between theory and experiment in these two limits shows good agreement. Deviations are observed at very small velocities, where the real bearings are not well modeled by Coulomb friction.
We develop a microscopic picture of shear thickening in dense suspensions which emphasizes the role of frictional forces, coupling rotational and translational degrees of freedom. Simulations with contact forces and viscous drag only, reveal pronounced shear thickening with a simultaneous increase in contact number and energy dissipation by frictional forces. At high densities, when the translational motion is severely constrained, we observe liquid-like gear-states with pronounced relative rotations of the particles coexisting with solid-like regions which rotate as a whole. The latter are stabilised by frustrated loops which become more numerous and persistent with increasing pressure, giving rise to an increasing lengthscale of this mosaique-like structure and a corresponding increase in viscosity.
We discuss the stick-slip motion of an elastic block sliding along a rigid substrate. We argue that for a given external shear stress this system shows a discontinuous nonequilibrium transition from a uniform stick state to uniform sliding at some critical stress which is nothing but the Griffith threshold for crack propagation. An inhomogeneous mode of sliding occurs, when the driving velocity is prescribed instead of the external stress. A transition to homogeneous sliding occurs at a critical velocity, which is related to the critical stress. We solve the elastic problem for a steady-state motion of a periodic stick-slip pattern and derive equations of motion for the tip and resticking end of the slip pulses. In the slip regions we use the linear viscous friction law and do not assume any intrinsic instabilities even at small sliding velocities. We find that, as in many other pattern forming system, the steady-state analysis itself does not select uniquely all the internal parameters of the pattern, especially the primary wavelength. Using some plausible analogy to first order phase transitions we discuss a ``soft selection mechanism. This allows to estimate internal parameters such as crack velocities, primary wavelength and relative fraction of the slip phase as function of the driving velocity. The relevance of our results to recent experiments is discussed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
