Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHigh-resolution remote thermography using luminescent low-dimensional tin-halide perovskites
63
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
While metal-halide perovskites have recently revolutionized research in optoelectronics through a unique combination of performance and synthetic simplicity, their low-dimensional counterparts can further expand the field with hitherto unknown and practically useful optical functionalities. In this context, we present the strong temperature dependence of the photoluminescence (PL) lifetime of low-dimensional, perovskite-like tin-halides, and apply this property to thermal imaging with a high precision of 0.05 {deg}C. The PL lifetimes are governed by the heat-assisted de-trapping of self-trapped excitons, and their values can be varied over several orders of magnitude by adjusting the temperature (up to 20 ns {deg}C-1). Typically, this sensitive range spans up to one hundred centigrade, and it is both compound-specific and shown to be compositionally and structurally tunable from -100 to 110 {deg} C going from [C(NH2)3]2SnBr4 to Cs4SnBr6 and (C4N2H14I)4SnI6. Finally, through the innovative implementation of cost-effective hardware for fluorescence lifetime imaging (FLI), based on time-of-flight (ToF) technology, these novel thermoluminophores have been used to record thermographic videos with high spatial and thermal resolution.
rate research
Read More
Bulk quantum materials based on zero-dimensional (0D) lead-free organic tin halide perovskites have been developed for the first time, which give broadband Gaussian-shaped and strongly Stokes shifted emissions with quantum efficiencies of up to near-unity at room temperature due to excited state structural reorganization.
The paper presents the results of measurements of XPS valence band spectra of SiO2/MAPbI3 hybrid perovskites subjected to irradiation with visible light and annealing at an exposure of 0-1000 hours. It is found from XPS survey spectra that in both cases (irradiation and annealing) a decrease in the I:Pb ratio is observed with aging time, which unambiguously indicates PbI2 phase separation as a photo and thermal product of degradation. The comparison of the XPS valence band spectra of irradiated and annealed perovskites with density functional theory calculations of the MAPbI3 and PbI2 compounds have shown a systematic decrease in the contribution of I 5p-states and allowed us to determine the threshold for degradation, which is 500 hours for light irradiation and 200 hours for annealing.
Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, among others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect from highly pure inorganic crystals that are grown at high temperatures. This unique phenomenon has resulted in fast-paced progress toward record device performance; unfortunately, the basic science behind the remarkable nature of these materials is still not well understood. This review assesses the current understanding of the photoluminescence (PL) properties of metal halide perovskite materials and highlights key areas that require further research. Furthermore, the need to standardize the methods for characterization of PL in order to improve comparability, reliability and reproducibility of results is emphasized.
In recent years, metal halide perovskites have generated tremendous interest for optoelectronic applications and their underlying fundamental properties. Due to the large electron-phonon coupling characteristic of soft lattices, self-trapping phenomena are expected to dominate hybrid perovskite photoexcitation dynamics. Yet, while the photogeneration of small polarons was proven in low dimensional perovskites, the nature of polaron excitations in technologically relevant 3D perovskites, and their influence on charge carrier transport, remain elusive. In this study, we used a combination of first principle calculations and advanced spectroscopy techniques spanning the entire optical frequency range to pin down polaron features in 3D metal halide perovskites. Mid-infrared photoinduced absorption shows the photogeneration of states associated to low energy intragap electronic transitions with lifetime up to the ms time scale, and vibrational mode renormalization in both frequency and amplitude. Density functional theory supports the assignment of the spectroscopic features to large polarons leading to new intra gap transitions, hardening of phonon mode frequency, and renormalization of the oscillator strength. Theory provides quantitative estimates of the charge carrier masses and mobilities increase upon polaron formation, confirming experimental results. Overall, this work contributes to complete the scenario of elementary photoexcitations in metal halide perovskites and highlights the importance of polaronic transport in perovskite-based optoelectronic devices.
2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In this study, we report the effect of number of inorganic layers `n on elastic modulus of Butylammonium based 2D, quasi-2D perovskites and 3D perovskite using nanoindentation technique. The experimental results have also been substantiated using first principle density functional theory calculations. Understanding the mechanical behaviour of 2D Ruddlesden Popper perovskites thin films in comparison with conventional 3D perovskite offers intriguing insights into the atomic layer dependent properties and paves the path for next generation mechanically durable novel devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
