Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLarge-area synthesis of continuous two-dimensional MoTexSe2-x alloy films by chemical vapor deposition
326
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Great achievements have been made in alloying of two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), which can allow tunable band gaps for practical applications in optoelectronic devices. However, telluride-based TMDs alloys were less studied due to the difficulties of sample synthesis. Here, in this work we report the large-area synthesis of 2D MoTexSe2-x alloy films with controllable Te composition by a modified alkali metal halides assisted chemical vapor deposition method. The as-prepared films have millimeter-scale transverse size. Raman spectra experiments combining calculated Raman spectra and vibrational images obtained by density functional theory (DFT) confirmed the 2H-phase of the MoTexSe2-x alloys. The A1g mode of MoSe2 shows a significant downshift accompanied by asymmetric broadening to lower wavenumber with increasing value of x, while E12g mode seems unchanged, which were well explained by a phonon confinement model. Our work provides a simple method to synthesize large-scale 2H phase Te-based 2D TMDs alloys for their further applications.
rate research
Read More
Rhombohedral-stacked few-layer graphene (FLG) has been receiving an ever-increasing attention owing to its peculiar electronic properties that could lead to enticing phenomena such as superconductivity and magnetic ordering. Up to now, experimental studies on such material have been mainly limited by the difficulty in isolating it in thickness exceeding 3 atomic layers with device-compatible size. In this work, rhombohedral graphene with thickness up to 9 layers and areas up to ~50 micrometers square is grown via chemical vapor deposition (CVD) on suspended Cu foils and transferred onto target substrates via etch-free delamination. The domains of rhombohedral FLG are identified by Raman spectroscopy and are found to alternate with domains of Bernal-stacked FLG within the same crystal in a stripe-like configuration. A combined analysis of micro-Raman mapping, atomic force microscopy and optical microscopy indicates that the formation of rhombohedral-stacked FLG is strongly correlated to the copper substrate morphology. Cu step bunching results in bending of FLG and interlayer displacement along preferential crystallographic orientations, as determined experimentally by electron microscopy, thus inducing the stripe-like domains. The growth and transfer of rhombohedral FLG with the reported thickness and size shall facilitate the observation of predicted unconventional physics and ultimately add to its technological relevance.
Two-dimensional (2D) transition metal dichalcogenides (TMDs), especially MoS2 and WS2 recently attract extensive attentions due to their rich physics and great potential applications. Superior to graphene, MS2 (M = Mo/W) monolayers have a native direct energy gap in visible frequency range. This promises great future of MS2 for optoelectronics. To exploit properties and further develop more applications, producing large-scale single crystals of MS2 by a facile method is highly demanded. Here, we report the synthesis of large-scale triangular single crystals of WS2 monolayer from a chemical vapor deposition process and systematic optical studies of such WS2 monolayers. The observations of high yield of light emission and valley-selective circular dichroism experimentally evidence the high optical quality of the WS2 monolayers. This work paves the road to fabricate large-scale single crystalline 2D semiconductors and study their fundamentals. It must be very meaningful for exploiting great potentials of WS2 for future optoelectronics.
We report on the production of nanodiamonds (NDs) with 70-80 nm size via bead assisted sonic disintegration (BASD) of a polycrystalline chemical vapor deposition (CVD) film. The NDs display high crystalline quality as well as intense narrowband (7 nm) room temperature luminescence at 738 nm due to in situ incorporated silicon vacancy (SiV) centers. The fluorescence properties at room and cryogenic temperatures indicate that the NDs are, depending on preparation, applicable as single photon sources or as fluorescence labels.
Two-dimensional semiconducting transition metal dichalcogenides embedded in optical microcavities in the strong exciton-photon coupling regime may lead to promising applications in spin and valley addressable polaritonic logic gates and circuits. One significant obstacle for their realization is the inherent lack of scalability associated with the mechanical exfoliation commonly used for fabrication of two-dimensional materials and their heterostructures. Chemical vapor deposition offers an alternative scalable fabrication method for both monolayer semiconductors and other two-dimensional materials, such as hexagonal boron nitride. Observation of the strong light-matter coupling in chemical vapor grown transition metal dichalcogenides has been demonstrated so far in a handful of experiments with monolayer molybdenum disulfide and tungsten disulfide. Here we instead demonstrate the strong exciton-photon coupling in microcavities comprising large area transition metal dichalcogenide / hexagonal boron nitride heterostructures made from chemical vapor deposition grown molybdenum diselenide and tungsten diselenide encapsulated on one or both sides in continuous few-layer boron nitride films also grown by chemical vapor deposition. These transition metal dichalcogenide / hexagonal boron nitride heterostructures show high optical quality comparable with mechanically exfoliated samples, allowing operation in the strong coupling regime in a wide range of temperatures down to 4 Kelvin in tunable and monolithic microcavities, and demonstrating the possibility to successfully develop large area transition metal dichalcogenide based polariton devices.
The usage of molten salts, e.g., Na2MoO4 and Na2WO4, has shown great success in the growth of two-dimensional (2D) transition metal dichalcogenides (TMDCs) by chemical vapor deposition (CVD). In comparison with the halide salt (i.e., NaCl, NaBr, KI)-assisted growth (Salt 1.0), the molten salt-assisted vapor-liquid-solid (VLS) growth technique (Salt 2.0) has improved the reproducibility, efficiency and scalability of synthesizing 2D TMDCs. However, the growth of large-area MoSe2 and WTe2 is still quite challenging with the use Salt 2.0 technique. In this study, a renewed Salt 2.0 technique using mixed salts (e.g., Na2MoO4-Na2SeO3 and Na2WO4-Na2TeO3) is developed for the enhanced CVD growth of 2D MoSe2 and WTe2 crystals with large grain size and yield. Continuous monolayer MoSe2 film with grain size of 100-250 {mu}m or isolated flakes up to ~ 450 {mu}m is grown on a halved 2-inch SiO2/Si wafer. Our study further confirms the synergistic effect of Na+ and SeO32- in the enhanced CVD growth of wafer-scale monolayer MoSe2 film. And thus, the addition of Na2SeO3 and Na2TeO3 into the transition metal salts could be a general strategy for the enhanced CVD growth of many other 2D selenides and tellurides.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
