Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEnergy Efficiency Maximization for SWIPT Enabled Two-Way DF Relaying
132
0
0.0
(
0
)
Added by
Yinghui Ye
Publication date
2019
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
This paper focuses on the design of an optimal resource allocation scheme to maximize the energy efficiency (EE) in a simultaneous wireless information and power transfer (SWIPT) enabled two-way decode-and-forward (DF) relay network under a non-linear energy harvesting model. In particular, we formulate an optimization problem by jointly optimizing the transmit powers of two source nodes, the power-splitting (PS) ratios of the relay, and the time for the source-relay transmission, under multiple constraints including the transmit power constraints at sources and the minimum rate requirement. Although the formulated problem is non-convex, an iterative algorithm is developed to obtain the optimal resource allocation. Simulation results verify the proposed algorithm and show that the designed resource allocation scheme is superior to other benchmark schemes in terms of EE.
rate research
Read More
Wireless energy harvesting (WEH) has been recognized as a promising technique to prolong the lifetime of energy constrained relay nodes in wireless sensor networks. Its application and related performance study in three-step two-way decode-and-forward (DF) relay networks are of high interest but still lack sufficient study. In this paper we propose a dynamic power splitting (PS) scheme to minimize the system outage probability in a three-step two-way energy harvesting DF relay network and derive an analytical expression for the system outage probability with respect to the optimal dynamic PS ratios. In order to further improve the system outage performance, we propose an improved dynamic scheme where both the PS ratios and the power allocation ratio at the relay are dynamically adjusted according to instantaneous channel gains. The corresponding system performance with the improved dynamic scheme is also investigated. Simulation results show that our proposed schemes outperform the existing scheme in terms of the system outage performance and the improved dynamic scheme is superior to the dynamic PS scheme.
In this paper, we investigate the system outage probability of a simultaneous wireless information and power transfer (SWIPT) based two-way amplify-and-forward (AF) relay network considering transceiver hardware impairments (HIs), where the energy-constrained relay node processes the received signals based on a power splitting protocol and the two terminals employ a selection combining (SC) scheme to exploit the signals from the direct and relaying links. Assuming independent but non-identically distributed Nakagami-m fading channels, we derive the system outage probability in a closed-form, which enables us to identify two crucial ceiling effects on the system outage probability caused by HIs in the high data rate regions, i.e., relay cooperation ceiling (RCC) and overall system ceiling (OSC). Specifically, the RCC prevents the relaying link from participating in cooperative communications, while the OSC leaves the overall system in outage. Furthermore, we derive the achievable diversity gain of the considered network, which shows that the diversity gain equals either the shape parameter of the direct link or zero. Computer simulations are provided to validate the correctness of our analytical results, and study the effects of various system parameters on the system outage performance and the optimal power splitting ratio, as well as the energy efficiency.
Simultaneous wireless information and power transfer (SWIPT) has been recognized as a promising approach to improving the performance of energy constrained networks. In this paper, we investigate a SWIPT based three-step two-way decode-and-forward (DF) relay network with a non-linear energy harvester equipped at the relay. As most existing works require instantaneous channel state information (CSI) while CSI is not fully utilized when designing power splitting (PS) schemes, there exists an opportunity for enhancement by exploiting CSI for PS design. To this end, we propose a novel heterogeneous PS scheme, where the PS ratios are dynamically changed according to instantaneous channel gains. In particular, we derive the closed-form expressions of the optimal PS ratios to maximize the capacity of the investigated network and analyze the outage probability with the optimal dynamic PS ratios based on the non-linear energy harvesting (EH) model. The results provide valuable insights into the effect of various system parameters, such as transmit power of the source, source transmission rate, and source to relay distance on the performance of the investigated network. The results show that our proposed PS scheme outperforms the existing schemes.
In this paper, we study the outage performance of simultaneous wireless information and power transfer (SWIP- T) based three-step two-way decode-and-forward (DF) relay networks, where both power-splitting (PS) and harvest-then-forward are employed. In particular, we derive the expressions of terminal-to-terminal (T2T) and system outage probabilities based on a Gaussian-Chebyshev quadrature approximation, and obtain the T2T and system outage capacities. The effects of various system parameters, e.g., the static power allocation ratio at the relay, symmetric PS, as well as asymmetric PS, on the outage performance of the investigated network are examined. It is shown that our derived expression for T2T outage capacity is more accurate than existing analytical results, and that the asymmetric PS achieves a higher system outage capacity than the symmetric one when the channels between the relay node and the terminal nodes have different statistic gains.
This work studies the joint problem of power and trajectory optimization in an unmanned aerial vehicle (UAV)-enabled mobile relaying system. In the considered system, in order to provide convenient and sustainable energy supply to the UAV relay, we consider the deployment of a power beacon (PB) which can wirelessly charge the UAV and it is realized by a properly designed laser charging system. To this end, we propose an efficiency (the weighted sum of the energy efficiency during information transmission and wireless power transmission efficiency) maximization problem by optimizing the source/UAV/PB transmit powers along with the UAVs trajectory. This optimization problem is also subject to practical mobility constraints, as well as the information-causality constraint and energy-causality constraint at the UAV. Different from the commonly used alternating optimization (AO) algorithm, two joint design algorithms, namely: the concave-convex procedure (CCCP) and penalty dual decomposition (PDD)-based algorithms, are presented to address the resulting non-convex problem, which features complex objective function with multiple-ratio terms and coupling constraints. These two very different algorithms are both able to achieve a stationary solution of the original efficiency maximization problem. Simulation results validate the effectiveness of the proposed algorithms.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
