Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFirst-light images from low dispersion spectrograph-cum-imager on 3.6-meter Devasthal Optical Telescope
87
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A low dispersion spectrograph-cum-imager has been developed and assembled in ARIES, Nainital. The optical design of the spectrograph consists of a collimator and a focal reducer converting the f/9 beam from the 3.6-m Devasthal optical telescope to a nearly f/4.3 beam. The instrument is capable of carrying out broad-band imaging, narrow-band imaging and low-resolution ({lambda}/{Delta}{lambda}<2000) slit spectroscopy in the wavelength range 350-1050 nm. A closed-cycle cryogenically cooled charge-coupled device camera, also assembled in ARIES, is used as the main imaging device for the spectrograph. The first images from the spectrograph on the telescope assert seeing-limited performance free from any significant optical aberration. An i-band image of the galaxy cluster Abell 370 made using the spectrograph shows faint sources down to ~25 mag. The quality and sensitivity of the optical spectrums of the celestial sources obtained from the spectrograph are as per the expectations from a 3.6-m telescope. Several new modes of observations such as polarimetry, fast-imaging, and monitoring of the atmospheric parameters are being included in the spectrograph. Using a test setup, single optical pulses from the Crab pulsar were detected from the telescope. The spectrograph is one of the main back-end instruments on the 3.6-m telescope for high sensitivity observations of celestial objects.
rate research
Read More
The 3.6 meter Indo-Belgian Devasthal optical telescope (DOT) has been used for optical and near-infrared (NIR) observations of celestial objects. The telescope has detected stars of B = 24.5+-0.2; R = 24.6+-0.12 and g = 25.2+-0.2 mag in exposure times of 1200, 4320 and 3600 seconds respectively. In one hour of exposure time, a distant galaxy of 24.3+-0.2 mag and point sources of ~ 25 mag have been detected in the SDSS i band. The NIR observations show that stars up to J = 20+-0.1; H = 18.8+-0.1 and K = 18.2+-0.1 mag can be detected in effective exposure times of 500, 550 and 1000 seconds respectively. The nbL band sources brighter than ~9.2 mag and strong (> 0.4 Jy) PAH emitting sources like Sh 2-61 can also be observed with the 3.6 meter DOT. A binary star having angular separation of 0.4 arc-sec has been resolved by the telescope. Sky images with sub-arc-sec angular resolutions are observed with the telescope at wavelengths ranging from optical to NIR for a good fraction of observing time. The on-site performance of the telescope is found to be at par with the performance of other similar telescopes located elsewhere in the world. Due to advantage of its geographical location, the 3.6 meter DOT can provide optical and NIR observations for a number of front line Galactic and extra-galactic astrophysical research problems including optical follow up of GMRT and AstroSat sources and optical transient objects.
Indias largest 3.6 m aperture optical telescope has been successfully installed in the central Himalayan region at Devasthal, Nainital district, Uttarakhand. The primary mirror of the telescope uses the active optics technology. The back-end instruments, enabling spectroscopic and photometric imaging of the celestial sky are designed and developed by ARIES along with other Indian institutes. The Devasthal optical telescope in synergy with two other highly sensitive telescopes in the country, namely GMRT operating in the radio wavebands and AstroSat operating in the high-energy X-ray, ultraviolet and visual wavebands, will enable Indian astronomers to carry out scientific studies in several challenging areas of astronomy and astrophysics.
Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital. It is mainly designed to study the physics and kinematics of the ionized gas, star formation and H II regions in the nearby galaxies. It is a novel instrument in terms of multi-IFU, built in deployment system, and high throughput. It consists of one magnifier, 16 integral field units (IFUs), and 8 spectrographs. Each IFU is comprised of a microlens array and optical fibers and has 7.4 x 8.7 field of view with 144 spaxel elements, each sampling 0.8 hexagonal aperture. The IFUs can be distributed on the telescope side port over an 8 diameter focal plane by the deployment system. Optical fibers deliver light from the IFUs to the spectrographs. Eight identical, all refractive, dedicated spectrographs will produce 2,304 R~1800 spectra over 370-740nm wavelength range with a single exposure. Volume Phase Holographic gratings are chosen to make smaller optics and get high throughput. The total throughput of the instrument including the telescope is predicted as 27.5% on average. Observing techniques, data simulator and reduction software are also under development. Currently, conceptual and baseline design review has been done. Some of the components have already been procured. The instrument is expected to see its first light in 2016.
TIFR Near Infrared Imaging Camera-II is a closed-cycle Helium cryo-cooled imaging camera equipped with a Raytheon 512 x 512 pixels InSb Aladdin III Quadrant focal plane array having sensitivity to photons in the 1-5 microns wavelength band. In this paper, we present the performance of the camera on the newly installed 3.6-m Devasthal Optical Telescope (DOT) based on the calibration observations carried out during 2017 May 11-14 and 2017 October 7-31. After the preliminary characterization, the camera has been released to the Indian and Belgian astronomical community for science observations since 2017 May. The camera offers a field-of-view of ~86.5 arcsec x 86.5 arcsec on the DOT with a pixel scale of 0.169 arcsec. The seeing at the telescope site in the near-infrared bands is typically sub-arcsecond with the best seeing of ~0.45 arcsec realized in the near-infrared K-band on 2017 October 16. The camera is found to be capable of deep observations in the J, H and K bands comparable to other 4-m class telescopes available world-wide. Another highlight of this camera is the observational capability for sources up to Wide-field Infrared Survey Explorer (WISE) W1-band (3.4 microns) magnitudes of 9.2 in the narrow L-band (nbL; lambda_{cen} ~3.59 microns). Hence, the camera could be a good complementary instrument to observe the bright nbL-band sources that are saturated in the Spitzer-Infrared Array Camera ([3.6] <= 7.92 mag) and the WISE W1-band ([3.4] <= 8.1 mag). Sources with strong polycyclic aromatic hydrocarbon (PAH) emission at 3.3 microns are also detected. Details of the observations and estimated parameters are presented in this paper.
The recently commissioned 3.6-m Devasthal optical telescope has been used for various tests and science observations using three main instruments, namely, a charge-coupled device camera, a near-infrared camera, and an optical imager-cum-spectrograph. The published results from these instruments assert that the performance of the telescope at the Devasthal site is at par with the expectations. These back-end instruments open up vast opportunities for high-sensitivity observations of the celestial sky with the telescope. This paper provides a summary of the existing back-end instruments and attempts to highlight the importance of the Devasthal optical telescope in synergy with other telescopes operating at different wavelengths.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
