Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSpatial segregation of dust grains in transition disks. SPHERE observations of 2MASS J16083070-3828268 and RXJ1852.3-3700
68
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Context. The mechanisms governing the opening of cavities in transition disks are not fully understood. Several processes have been proposed but their occurrence rate is still unknown. Aims. We present spatially resolved observations of two transition disks and aim at constraining their vertical and radial structure using multiwavelength observations. Methods. We have obtained near-IR scattered light observations with VLT/SPHERE of the transition disks J1608 and J1852. We complement our datasets with ALMA observations and with unresolved photometric observations covering a wide range of wavelengths. We performed radiative transfer modeling to analyze the morphology of the disks and compare the results with a sample of 20 other transition disks observed with both SPHERE and ALMA. Results. The scattered light image of J1608 reveals a very inclined disk, with two bright lobes and a large cavity. J1852 shows an inner ring extending beyond the coronagraphic radius up to 15au, a gap and a second ring at 42au. Our radiative transfer model of J1608 indicates that the millimeter-sized grains are less extended vertically and radially than the micron-sized grains, indicating advanced settling and radial drift. We find good agreement with the observations of J1852 with a similar model, but due to the low inclination of the system, the model remains partly degenerate. The analysis of 22 transition disks shows that, in general, the cavities observed in scattered light are smaller than the ones detected at millimeter wavelengths. Conclusions. The analysis of a sample of transition disks indicates that the small grains can flow inward of the region where millimeter grains are trapped. While 15 out of the 22 cavities in our sample could be explained by a planet of less than 13 Jupiter masses, the others either require the presence of a more massive companion or of several low-mass planets.
rate research
Read More
Spatial distribution and growth of dust in a clumpy protoplanetary disk subject to vigorous gravitational instability and fragmentation is studied numerically with sub-au resolution using the FEOSAD code. Hydrodynamics equations describing the evolution of self-gravitating and viscous protoplanetary disks in the thin-disk limit were modified to include a dust component consisting of two parts: sub-micron-sized dust and grown dust with a variable maximum radius. The conversion of small to grown dust, dust growth, friction of dust with gas, and dust self-gravity were also considered. We found that the disk appearance is notably time-variable with spiral arms, dusty rings, and clumps, constantly forming, evolving, and decaying. As a consequence, the total dust-to-gas mass ratio is highly non-homogeneous throughout the disk extent, showing order-of-magnitude local deviations from the canonical 1:100 value. Gravitationally bound clumps formed through gravitational fragmentation have a velocity pattern that deviates notably from the Keplerian rotation. Small dust is efficiently converted into grown dust in the clump interiors, reaching a maximum radius of several decimeters. Concurrently, grown dust drifts towards the clump center forming a massive compact central condensation (70-100 $M_oplus$). We argue that protoplanets may form in the interiors of inward migrating clumps before they disperse through the action of tidal torques. We foresee the formation of protoplanets at orbital distances of several tens of au with initial masses of gas and dust in the protoplanetary seed in the (0.25-1.6) $M_{rm Jup}$ and (1.0-5.5) $M_oplus$ limits, respectively. The final masses of gas and dust in the protoplanets may however be much higher due to accretion from surrounding massive metal-rich disks/envelopes.
Spatially resolved continuum observations of planet-forming disks show prominent ring and gap structures in their dust distribution. However, the picture from gas observations is much less clear and constraints on the radial gas density structure (i.e. gas gaps) remain rare and uncertain. We want to investigate the importance of thermo-chemical processes for the interpretation of high-spatial-resolution gas observations of planet-forming disks and their impact on derived gas properties. We apply the radiation thermo-chemical disk code ProDiMo (PROtoplanetary DIsk MOdel) to model self-consistently the dust and gas disk of HD 163296, using the DSHARP gas and dust observations. With this model we investigate the impact of dust gaps and gas gaps, considering chemistry and heating/cooling processes, on the observables and the derived gas properties. We find distinct peaks in the radial line intensity profiles of the CO line data of HD 163296 at the location of the dust gaps. Our model indicates that those peaks are not only a consequence of a gas temperature increase within the gaps but are mainly caused by the absorption of line emission from the back side of the disk by the dust rings. For two of the three prominent dust gaps in HD 163296, we find that thermo-chemical effects are negligible for deriving density gradients via measurements of the rotation velocity. However, for the gap with the highest dust depletion, the temperature gradient can be dominant and needs to be considered to derive accurate gas density profiles. Self-consistent gas and dust thermo-chemical modelling in combination with high-quality observations of multiple molecules are necessary to accurately derive gas gap depths and shapes. This is crucial to determine the origin of gaps and rings in planet-forming disks and to improve the mass estimates of forming planets if they are the cause of the gap.
The detection of gas in debris disks raises the question of whether this gas is a remnant from the primordial protoplanetary phase, or released by the collision of secondary bodies. In this paper we analyze ALMA observations at 1-1.5 resolution of three debris disks where the $^{12}$CO(2-1) rotational line was detected: HD131835, HD138813, and HD156623. We apply the iterative Lucy-Richardson deconvolution technique to the problem of circumstellar disks to derive disk geometries and surface brightness distributions of the gas. The derived disk parameters are used as input for thermochemical models to test both primordial and cometary scenarios for the origin of the gas. We favor a secondary origin for the gas in these disks and find that the CO gas masses ($sim 3times10^{-3}$ M$_{oplus}$) require production rates ($sim 5times 10^{-7}$ M$_{oplus}$~yr$^{-1}$) similar to those estimated for the bona-fide gas rich debris disk $beta$ Pic.
Polarized continuum emission from aligned grains in disks around young stellar objects can be used to probe the magnetic field, radiation anisotropy, or drift between dust and gas, depending on whether the non-spherical grains are aligned magnetically, radiatively or mechanically. We show that it can also be used to probe another key disk property -- the temperature gradient -- along sight lines that are optically thick, independent of the grain alignment mechanism. We first illustrate the technique analytically using a simple 1D slab model, which yields an approximate formula that relates the polarization fraction to the temperature gradient with respect to the optical depth tau at the tau=1 surface. The formula is then validated using models of stellar irradiated disks with and without accretion heating. The promises and challenges of the technique are illustrated with a number of Class 0 and I disks with ALMA dust polarization data, including NGC 1333 IRAS4A1, IRAS 16293B, BHB 07-11, L1527, HH 212 and HH 111. We find, in particular, that the sight lines passing through the near-side of a highly inclined disk trace different temperature gradient directions than those through the far-side, which can lead to a polarization orientation on the near-side that is orthogonal to that on the far-side, and that the HH 111 disk may be such a case. Our technique for probing the disk temperature gradient through dust polarization can complement other methods, particularly those using molecular lines.
(Sub-)Millimeter observations of the polarized emission of aligned aspherical dust grains enable us to study the magnetic fields within protoplanetary disk. However, the interpretation of these observations is complex. One must consider the various effects that alter the measured polarized signal, such as the shape of dust grains, the efficiency of grain alignment, the magnetic field properties, and the projection of the signal along the line of sight. We aim at analyzing observations of the polarized dust emission by disentangling the effects on the polarization signal in the context of 3D radiative transfer simulations. For this purpose, we developed a code capable of simulating dust grain alignment of aspherical grains and intrinsical polarization of thermal dust emission. We find that the influence of thermal polarization and dust grain alignment on the polarized emission displayed as spatially resolved polarization map or as spectral energy distribution trace disk properties which are not traced in total (unpolarized) emission such as the magnetic field topology. The radiative transfer simulations presented in this work enable the 3D analysis of intrinsically polarized dust emission - observed with, e.g., ALMA - which is essential to constrain magnetic field properties.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
