Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSpace-coiling Acoustic Metasurface with Independent Modulations of Phase and Amplitude
198
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
In this work, we propose a design of acoustic meta-surfaces in sub-wavelength scale enabling independent modulations of phase and amplitude. Each unit cell of the acoustic meta-surface consists of simple conventional space-coiling structure added with an air layer, which can be analyzed as two equivalent slabs with non-dispersion effective parameters. The amplitude depends on the space-coiling structure regardless of the air layer, and the phase can be further adjusted by the air layer independent to the amplitude. The acoustic meta-surface covers an entire phase change of 2-pi and amplitude change of one. We demonstrate an acoustic illusion effect by using the acoustic meta-surface screen, which works well as a full-control discontinuous boundary to support phase and amplitude differences between the original and illusion patterns. The incident field of a point source is transformed into a target field of the point source scattered by an object with shadow area behind it.
rate research
Read More
In this paper, we propose a continuously tunable acoustic metasurface composed of identical anisotropic resonant units, each of which contains a rigid pedestal and a rotatable inclusion with space coiling-up structure. The metasurface can manipulate the reflected phase by adjusting the rotational angle of inclusion. The theoretical analysis shows that the polarization-dependent phase change can be induced by the even-order standing wave modes inside inclusion. By utilizing the rotatable inclusion, we design a tunable acoustic carpet cloaking device, which works with a wide range for incident angle. When incident waves come from different directions, the cloaking effect can be obtained by arrange the rotational angle of each inclusion.
A metasurface particle with independent transmission and reflection full phase coverage for circularly polarized waves is introduced. This particle is constituted of two parts, one controlling the power splitting and the reflection phase, and the other one controlling the transmission phase, both leveraging the Pancharatnam-Berry phase principle. Given its unique flexibility, this particle may find various applications in metasurface technology.
This paper describes a new kind of acoustic metasurface with multiply resonant units, which have previously been used to induce multiple resonances and effectively produce negative mass density and bulk/shear moduli. The proposed acoustic metasurface can be constructed using real materials and does not rely on an ideal rigid material. Therefore, it can work well in a water background. The thickness of the acoustic metasurface is about two orders of magnitude smaller than the acoustic wavelength in water. The design of a unit group is proposed to avoid the phase discretization becoming too fine in such a long-wavelength condition. We demonstrate that the proposed acoustic metasurface achieves good performance in anomalous reflection, focusing, and carpet cloaking.
We theoretically and experimentally propose two designs of broadband low-frequency acoustic metasurface absorbers (Sample I/Sample II) for the frequency ranges of 458Hz~968Hz and 231Hz~491Hz (larger than 1 octave), with absorption larger than 0.8, and having the ultra-thin thickness of 5.2cm and 10.4cm respectively ({lambda}/15 for the lowest working frequency and {lambda}/7.5 for the highest frequency). The designed supercell consists of 16 different unit cells corresponding to 16 eigen frequencies for resonant absorptions. The coupling of multiple resonances leads to broadband absorption effect in the full range of the targeted frequency spectrum. In particular, we propose to combine gradient-change channel and coiled structure to achieve simultaneous impedance matching and minimal occupied space, leading to the ultra-thin thickness of the metasurface absorbers. Our conceived ultra-thin low-frequency broadband absorbers may lead to pragmatic implementations and applications in noise control field.
In analogy with electromagnetic networks which connect multiple input-output ports, metasurfaces can be considered as multi-port devices capable of providing different functionalities for waves of different polarizations illuminating the surface from different directions. The main challenge in the design of such multichannel metasurfaces is to ensure independent and full control of the electromagnetic response for each channel ensuring the fulilment of the boundary condition at the metasurface. In this work, we demonstrate that by properly engineering the evanescent fields excited at each port (that is, for all possible illumination directions), it is possible to independently control the reflection or transmission for all different illuminations. We develop a fully analytical method to analyze and synthesize general space-modulated impedance metasurfaces, engineering strong spatial dispersion. This method, combined with mathematical optimization, allows us to find a surface impedance profile that simultaneously ensures the desired electromagnetic responses at each port. We validate the technique via the design of phase-controlled multichannel retroreflectors. In addition, we demonstrate that the method is rather powerful in the design of other functional metasurfaces such as multifunctional reflectors and multichannel perfect absorbers.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
