Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMagnetoelectric Coupling by Giant Piezoelectric Tensor Design
126
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Strain-coupled magnetoelectric (ME) phenomena in piezoelectric / ferromagnetic thin-film bilayers are a promising paradigm for sensors and information storage devices, where strain is utilized to manipulate the magnetization of the ferromagnetic film. In-plane magnetization rotation with an electric field across the film thickness has been challenging due to the virtual elimination of in-plane piezoelectric strain by substrate clamping, and to the requirement of anisotropic in-plane strain in two-terminal devices. We have overcome both of these limitations by fabricating lithographically patterned devices with a piezoelectric membrane on a soft substrate platform, in which in-plane strain is freely generated, and a patterned edge constraint that transforms the nominally isotropic piezoelectric strain into the required uniaxial strain. We fabricated 500 nm thick, (001) oriented [Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_3$]$_{0.7}$-[PbTiO$_3$]$_{0.3}$ (PMN-PT) unclamped piezoelectric membranes with ferromagnetic Ni overlayers. Guided by analytical and numerical continuum elastic calculations, we designed and fabricated two-terminal devices exhibiting Ni magnetization rotation in response to an electric field across the PMN-PT. Similar membrane heterostructures could be used to apply designed strain patterns to many other materials systems to control properties such as superconductivity, band topology, conductivity, and optical response.
rate research
Read More
The thin film configuration presents obvious practical advantages over the 1D implementation in energy harvesting systems such as easily manufacturing and processing and long lasting and stable devices. However, most of the ZnO-based piezoelectric nanogenerators (PENGs) reported so far relay in the exploitation of single-crystalline ZnO nanowires because their self-orientation in the c-axis and ability to accommodate long deformations resulting in a high piezoelectric performance. Herein, we show an innovative approach aiming to produce PENGs by combining polycrystalline ZnO layers fabricated at room temperature by plasma assisted deposition with supported small-molecule organic nanowires (ONWs) acting as 1D scaffold. The resulting hybrid nanostructure is formed by a single-crystalline organic nanowire conformally surrounded by a three dimensional (3D) ZnO shell that combines the mechanical properties of the organic core with the piezoelectric response of the ZnO layer. In a loop forward towards the integration of multiple functions within a single wire, we have also developed ONW@Au@ZnO nanowires including a gold shell acting as inner nanoscopic electrode. Thus, we have built and compare thin films and 3D core@shell ONW@ZnO and ONW@Au@ZnO PENGs showing output piezo-voltages up to 170 mV. The synergistic combination of functionalities in the ONW@Au@ZnO devices promotes an enhanced performance generating piezo-currents almost twenty times larger than the ONW@ZnO nanowires and superior to the thin film nanogenerators for equivalent and higher thicknesses.
How the magnetoelectric coupling actually occurs on a microscopic level in multiferroic BiFeO3 is not well known. By using the high-resolution single crystal neutron diffraction techniques, we have determined the electric polarization of each individual elements of BiFeO3, and concluded that the magnetostrictive coupling suppresses the electric polarization at the Fe site below TN. This negative magnetoelectric coupling appears to outweigh the spin current contributions arising from the cycloid spin structure, which should produce a positive magnetoelectric coupling.
We present a design for a piezoelectric-driven uniaxial stress cell suitable for use at ambient and cryogenic temperatures, and that incorporates both a displacement and a force sensor. The cell has a diameter of 46 mm and a height of 13 mm. It can apply a zero-load displacement of up to ~45 $mu$m, and a zero-displacement force of up to ~245 N. With combined knowledge of the displacement and force applied to the sample, it can quickly be determined whether the sample and its mounts remain within their elastic limits. In tests on the oxide metal Sr$_2$RuO$_4$, we found that at room temperature serious plastic deformation of the sample onset at a uniaxial stress of ~0.2 GPa, while at 5 K the sample deformation remained elastic up to almost 2 GPa. This result highlights the usefulness of in situ tuning, in which the force can be applied after cooling samples to cryogenic temperatures.
Double-negative acoustic metamaterials (AMMs) offer the promising ability of superlensing for applications in ultrasonography, biomedical sensing and nondestructive evaluation. Here, under the simultaneous increasing or non-increasing mechanisms, we develop a unified topology optimization framework considering the different microstructure symmetries, minimal structural feature sizes and dispersion extents of effective parameters. Then we apply the optimization framework to furnish the heuristic resonance-cavity-based and space-coiling metamaterials with broadband double negativity. Meanwhile, we demonstrate the essences of double negativity derived from the novel artificial multipolar LC and Mie resonances which can be induced by controlling mechanisms in optimization. Furthermore, abundant numerical simulations validate the double negativity, negative refraction, enhancements of evanescent waves and subwavelengh imaging for the optimized AMMs. Finally, we experimentally show the desired broadband subwavelengh imaging using the 3D-printed optimized space-coiling metamaterial. The present methodology and broadband metamaterials provide the ideal strategy of constructing AMMs for subwavelengh imaging technology.
Given the paucity of single phase multiferroic materials (with large ferromagnetic moment), composite systems seem an attractive solution in the quest to realize magnetoelectric cou-pling between ferromagnetic and ferroelectric order parameters. Despite having antiferro-magnetic order, BiFeO3 (BFO) has nevertheless been a key material in this quest due to excel-lent ferroelectric properties at room temperature. We studied a superlattice composed of 8 repetitions of 6 unit cells of La0.7Sr0.3MnO3 (LSMO) grown on 5 unit cells of BFO. Significant net uncompensated magnetization in BFO is demonstrated using polarized neutron reflectometry in an insulating superlattice. Remarkably, the magnetization enables magnetic field to change the dielectric properties of the superlattice, which we cite as an example of synthetic magnetoelectric coupling. Importantly, this controlled creation of magnetic moment in BFO suggests a much needed path forward for the design and implementation of integrated oxide devices for next generation magnetoelectric data storage platforms.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
