Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFrequency and voltage regulation in hybrid AC/DC networks
76
0
0.0
(
0
)
Added by
Ioannis Lestas
Publication date
2018
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Hybrid AC/DC networks are a key technology for future electrical power systems, due to the increasing number of converter-based loads and distributed energy resources. In this paper, we consider the design of control schemes for hybrid AC/DC networks, focusing especially on the control of the interlinking converters (ILC(s)). We present two control schemes: firstly for decentralized primary control, and secondly, a distributed secondary controller. In the primary case, the stability of the controlled system is proven in a general hybrid AC/DC network which may include asynchronous AC subsystems. Furthermore, it is demonstrated that power-sharing across the AC/DC network is significantly improved compared to previously proposed dual droop control. The proposed scheme for secondary control guarantees the convergence of the AC system frequencies and the average DC voltage of each DC subsystem to their nominal values respectively. An optimal power allocation is also achieved at steady-state. The applicability and effectiveness of the proposed algorithms are verified by simulation on a test hybrid AC/DC network in MATLAB / Simscape Power Systems.
rate research
Read More
The increasing penetration of renewables in distribution networks calls for faster and more advanced voltage regulation strategies. A promising approach is to formulate the problem as an optimization problem, where the optimal reactive power injection from inverters are calculated to maintain the voltages while satisfying power network constraints. However, existing optimization algorithms require the exact topology and line parameters of underlying distribution system, which are not known for most cases and are difficult to infer. In this paper, we propose to use specifically designed neural network to tackle the learning and optimization problem together. In the training stage, the proposed input convex neural network learns the mapping between the power injections and the voltages. In the voltage regulation stage, such trained network can find the optimal reactive power injections by design. We also provide a practical distributed algorithm by using the trained neural network. Theoretical bounds on the representation performance and learning efficiency of proposed model are also discussed. Numerical simulations on multiple test systems are conducted to illustrate the operation of the algorithm.
In this paper, a full-bridge boost power converter topology is studied for power factor control, using output high order sliding mode control. The AC/DC converters are used for charging the battery and super-capacitor in hybrid electric vehicles from the utility. The proposed control forces the input currents to track the desired values, which can controls the output voltage while keeping the power factor close to one. Super-twisting sliding mode observer is employed to estimate the input currents and load resistance only from the measurement of output voltage. Lyapunov analysis shows the asymptotic convergence of the closed loop system to zero. Simulation results show the effectiveness and robustness of the proposed controller.
In this paper, a flexible optimization-based framework for intentional islanding is presented. The decision is made of which transmission lines to switch in order to split the network while minimizing disruption, the amount of load shed, or grouping coherent generators. The approach uses a piecewise linear model of AC power flow, which allows the voltage and reactive power to be considered directly when designing the islands. Demonstrations on standard test networks show that solution of the problem provides islands that are balanced in real and reactive power, satisfy AC power flow laws, and have a healthy voltage profile.
We theoretically investigate a near-quantum-limited parametric amplifier based on the nonlinear dynamics of quasiparticles flowing through a superconducting-insulator-superconducting junction. Photon-assisted tunneling, resulting from the combination of dc- and ac-voltage bias, gives rise to a strong parametric interaction for the electromagnetic modes reflected by the junction coupled to a transmission line. We show phase-sensitive and phase-preserving amplification, together with single- and two-mode squeezing. For an aluminum junction pumped at twice the center frequency, $omega_0/2pi=6$~GHz, we predict narrow-band phase-sensitive amplification of microwaves signals to more than 20 dB, and broadband phase-preserving amplification of 20 dB over a 1.2 GHz 3-dB bandwidth. We also predict single- and two-mode squeezing reaching more than -12 dB over 5.3 GHz 3-dB bandwidth. Moreover, with a simple impedance matching circuit, we demonstrate 3 dB bandwidth reaching 4.3 GHz for 20 dB of gain. A key feature of the device is that its performance can be controlled in-situ with the applied dc- and ac-voltage biases.
Frequency response and voltage support are vital ancillary services for power grids. In this paper, we design and experimentally validate a real-time control framework for battery energy storage systems (BESSs) to provide ancillary services to power grids. The objective of the control system is to utilize the full capability of the BESSs to provide ancillary services. We take the voltage-dependent capability curve of the DC-AC converter and the security requirements of BESSs as constraints of the control system. The initial power set-points are obtained based on the droop control approach. To guarantee the feasibility of the power set-points with respect to both the converter capability and BESS security constraints, the final power set-points calculation is formulated as a nonconvex optimization problem. A convex and computationally efficient reformulation of the original control problem is then proposed. We prove that the proposed convex optimization gives the global optimal solution to the original nonconvex problem. We improve the computational performance of this algorithm by discretizing the feasible region of the optimization model. We achieve a 100 ms update time of the controller setpoint computation in the experimental validation of the utility-scale 720 kVA / 560 kWh BESS on the EPFL campus.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
