Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCorrelation between site preference and magnetic properties of Zn-Sn-substituted strontium hexaferrite
124
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The site preference and magnetic properties of Zn, Sn and Zn-Sn substituted M-type strontium hexaferrite (SrFe$_{12}$O$_{19}$) have been investigated using first-principles total energy calculations based on density functional theory. The site occupancy of substituted atoms were estimated by calculating the substitution energies of different configurations. The distribution of different configurations during the annealing process at high temperature was determined using the formation probabilities of configurations to calculate magnetic properties of substituted strontium hexaferrite. We found that the magnetization and magnetocrystalline anisotropy are closely related to the distributions of Zn-Sn ions on the five Fe sites. Our calculation show that in SrFe$_{11.5}$Zn$_{0.5}$O$_{19}$, Zn atoms prefer to occupy $4f_1$, $12k$, and $2a$ sites with occupation probability of 78%, 19% and 3%, respectively, while in SrFe$_{11.5}$SnO$_{19}$, Sn atoms occupy the $12k$ and $4f_2$ sites with occupation probability of 54% and 46%, respectively. We also found that in SrFe$_{11}$Zn$_{0.5}$Sn$_{0.5}$O$_{19}$, (Zn,Sn) atom pairs prefer to occupy the ($4f_1$, $4f_2$), ($4f_1$, $12k$) and ($12k$, $12k$) sites with occupation probability of 82%, 8% and 6%, respectively. Our calculation shows that the increase of magnetization and the reduction of magnetic anisotropy in Zn-Sn substituted M-type strontium hexaferrite as observed experimentally is due to the occupation of (Zn,Sn) pairs at the ($4f_1$, $4f_2$) sites.
rate research
Read More
We use first-principles total-energy calculations based on density functional theory to study the site occupancy and magnetic properties of Al-substituted $M$-type strontium hexaferrite SrFe$_{12-x}$Al$_{x}$O$_{19}$ with $x=0.5$ and $x=1.0$. We find that the non-magnetic Al$^{3+}$ ions preferentially replace Fe$^{3+}$ ions at two of the majority spin sites, $2a$ and $12k$, eliminating their positive contribution to the total magnetization causing the saturation magnetization $M_s$ to be reduced as Al concentration $x$ is increased. Our formation probability analysis further provides the explanation for increased magnetic anisotropy field when the fraction of Al is increased. Although Al$^{3+}$ ions preferentially occupy the $2a$ sites at a low temperature, the occupation probability of the $12k$ site increases with the rise of the temperature. At a typical annealing temperature ($> 700,^{circ}{rm C}$) Al$^{3+}$ ions are much more likely to occupy the $12k$ site than the $2a$ site. Although this causes the magnetocrystalline anisotropy $K_1$ to be reduced slightly, the reduction in $M_s$ is much more significant. Their combined effect causes the anisotropy field $H_a$ to increase as the fraction of Al is increased, consistent with recent experimental measurements.
We study the site occupancy and magnetic properties of Zn-Sn substituted M-type Sr-hexaferrite SrFe$_{12-x}$(Zn$_{0.5}$Sn$_{0.5}$)$_x$O$_{19}$ with x = 1 using first-principles total-energy calculations. We find that in a ground-state configuration Zn-Sn ions preferentially occupy $4f_1$ and $4f_2$ sites unlike the model previously suggested by Ghasemi et al. [J. Appl. Phys, textbf{107}, 09A734 (2010)], where Zn$^{2+}$ and Sn$^{4+}$ ions occupy the $2b$ and $4f_2$ sites. Density-functional theory calculations show that our model has a lower total energy by more than 0.2 eV per unit cell compared to Ghasemis model. More importantly, the latter does not show an increase in saturation magnetization ($M_s$) compared to the pure $M$-type Sr-hexaferrite, in disagreement with the experiment. On the other hand, our model correctly predicts a rapid increase in $M_s$ as well as a decrease in magnetic anisotropy compared to the pure $M$-type Sr-hexaferrite, consistent with experimental measurements.
The results of an extensive investigation of structure, surface morphology, composition and the superconducting-normal phase diagram of a new unconventional superconductor LaAg1-cMnc with nominal composition c = 0.0, 0.025, 0.05, 0.1, 0.2 and 0.3, reveal the following. The alloys with c = 0, 0.025 and 0.05 are essentially single phase alloys with the actual Mn concentration, x, same as the nominal one, i.e., c = x, whereas in the alloys with c = 0.1, 0.2 and 0.3, the actual Mn concentration of the majority phase (crystalline grains) is x = 0.050(1), 0.080(1) and 0.100(1), respectively. The ternary Mn addition does not alter the CsCl structure of the parent compound LaAg. Neither a structural phase transition occurs nor a long-range antiferromagnetic order exists at any temperature within the range 1.8K < = T < = 50K in any of the Mn containing alloys. Mn has exclusive La (Ag) site preference in the alloy (alloys) with x = c = 0.025 (x < = 0.05 or c < = 0.1) whereas in the alloy with x = c = 0.05, Mn has essentially no site preference in that all the Mn atoms either occupy the La sites or the Ag sites. In the alloys (alloy) with x < = 0.05 (x = c = 0.025), substitution of Ag (La) by Mn at the Ag (La) sub-lattice sites in LaAg host gives rise to unconventional superconductivity (destroys the conventional phonon-mediated superconductivity prevalent in the parent LaAg compound).
Hexaferrite materials are highly demanded to develop and manufacture electronic devices operating at radio- and microwave frequencies. In the light of the prospects for their use in the forthcoming terahertz electronics, here, we present our results on the terahertz and infrared dielectric response of a typical representative of hexaferrites family, lead-substituted M-type barium hexaferrite doped with aluminum, Ba0.2Pb0.8AlxFe12-xO19, x(Al)=0.0, 3.0, and 3.3. We studied uniquely large and high-quality single crystals of the. Systematic and detailed investigations of the dependences of terahertz-infrared (frequencies 8 - 8000 cm-1) spectra of complex dielectric permittivity on the temperature, 4 - 300 K, and on the chemical composition, x(Al)=0.0, 1.2, 3.0, 3.3, were performed for polarizations of the electric field E-vector of the probing radiation normal and parallel to the crystallographic c-axis. A number of resonance absorption bands are discovered at infrared-terahertz frequencies and assigned to polar phonons and transitions between energy levels of the fine-structured ground state of Fe2+ (5E) ions. In contrast to undoped BaFe12O19, no softening of the lowest frequency A2u phonon is observed, indicating suppression of a displacive phase transition in substituted compounds. Basing on dielectric data and detailed X-ray experiments, we find that for all concentrations of Al3+ ions, x(Al)=0.0, 1.2, 3.0, and 3.3, they mainly occupy the 2a and 12k octahedral site positions and that the degree of substitution of iron in tetrahedral positions is not substantial. Along with fundamental findings, the obtained data on broad-band dielectric properties of Ba0.2Pb0.8AlxFe12-xO19 crystals provides the information that can be used for development and manufacture of electronic devices with operating frequencies lying in the terahertz spectral band.
We report the synthesis of Y-substituted Mg-Zn ferrites using conventional standard ceramic technique. XRD patterns confirm the single phase cubic spinel structure up to x = 0.03 and appearance of a secondary phase of YFeO3for higher Y contents. FESEM images depict the distribution of grains and EDS spectra confirmed the absence of any unwanted element. Completion of solid state reaction and formation of spinel structure has been revealed from FTIR spectra. The FTIR data along with lattice constant, bulk density and porosity were further used to calculate the stiffness constant (Cij), elastic constant and Debye temperatures. Mechanical stability of all studied compositions is confirmed from Cij using Born stability conditions. Brittleness and isotropic nature are also confirmed using Poisson ratio and anisotropy constants, respectively. The enhancement of dc electrical resistivity with Y content is observed. The energy band gap (increased with Y contents) is found in good agreement with dc electrical resistivity. Ferrimagnetic to paramagnetic phase change has been observed from the field dependent high temperature magnetization curves. The magnetic moments and saturation magnetization were found to be decreased with increasing temperature. The Curie temperature (Tc) has been measured from temperature dependent magnetic moment (M-T) and initial permeability and found to be in good agreement with each other. Decrease in Tc with Y content is due to redistribution of cations and weakening of the exchange coupling constant. The magnetic phase transition has been analyzed by Arrott plot and found to have second order phase transition. The dc resistivity endorses the prepared ferrites are suitable for high frequency and high temperature magnetic device applications as well.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
