Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userBlockchain-based Charging Coordination Mechanism for Smart Grid Energy Storage Units
70
0
0.0
(
0
)
Added by
Mahmoud Nabil
Publication date
2018
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Energy storage units (ESUs) enable several attractive features of modern smart grids such as enhanced grid resilience, effective demand response, and reduced bills. However, uncoordinated charging of ESUs stresses the power system and can lead to a blackout. On the other hand, existing charging coordination mechanisms suffer from several limitations. First, the need for a central charging coordinator (CC) presents a single point of failure that jeopardizes the effectiveness of the charging coordination. Second, a transparent charging coordination mechanism does not exist where users are not aware whether the CC is honest or not in coordination charging requests among them in a fair way. Third, existing mechanisms overlook the privacy concerns of the involved customers. To address these limitations, in this paper, we leverage the blockchain and smart contracts to build a decentralized charging coordination mechanism without the need for a centralized charging coordinator. First ESUs should use tokens for anonymously authenticate themselves to the blockchain. Then each ESU sends a charging request that contains its State-of-Charge (SoC), Time-to-complete-charge (TCC) and amount of required charging to the smart contract address on the blockchain. The smart contract will then run the charging coordination mechanism in a self-executed manner such that ESUs with the highest priorities are charged in the present time slot while charging requests of lower priority ESUs are deferred to future time slots. In this way, each ESU can make sure that charging schedules are computed correctly. Finally, we have implemented the proposed mechanism on the Ethereum test-bed blockchain, and our analysis shows that execution cost can be acceptable in terms of gas consumption while enabling decentralized charging coordination with increased transparency, reliability, and privacy preserving.
rate research
Read More
Energy storage units (ESUs) including EVs and home batteries enable several attractive features of the modern smart grids such as effective demand response and reduced electric bills. However, uncoordinated charging of ESUs stresses the power system. In this paper, we propose privacy-preserving and collusion-resistant charging coordination centralized and decentralized schemes for the smart grid. The centralized scheme is used in case of robust communication infrastructure that connects the ESUs to the utility, while the decentralized scheme is useful in case of infrastructure not available or costly. In the centralized scheme, each energy storage unit should acquire anonymous tokens from a charging controller (CC) to send multiple charging requests to the CC via the aggregator. CC can use the charging requests to enough data to run the charging coordination scheme, but it cannot link the data to particular ESUs or reveal any private information. Our centralized scheme uses a modified knapsack problem formulation technique to maximize the amount of power delivered to the ESUs before the charging requests expire without exceeding the available maximum charging capacity. In the decentralized scheme, several ESUs run the scheme in a distributed way with no need to aggregator or CC. One ESU is selected as a head node that should decrypt the ciphertext of the aggregated messages of the ESUs messages and broadcast it to the community while not revealing the ESUs individual charging demands. Then, ESUs can coordinate charging requests based on the aggregated charging demand while not exceeding the maximum charging capacity. Extensive experiments and simulations are conducted to demonstrate that our schemes are efficient and secure against various attacks, and can preserve ESU owners privacy.
In this paper, we propose to model the energy consumption of smart grid households with energy storage systems as an intertemporal trading economy. Intertemporal trade refers to transaction of goods across time when an agent, at any time, is faced with the option of consuming or saving with the aim of using the savings in the future or spending the savings from the past. Smart homes define optimal consumption as either balancing/leveling consumption such that the utility company is presented with a uniform demand or as minimizing consumption costs by storing energy during off-peak time periods when prices are lower and use the stored energy during peak time periods when prices are higher. Due to the varying nature of energy requirements of household and market energy prices over different time periods in a day, households face a trade-off between consuming to meet their current energy requirements and/or storing energy for future consumption and/or spending energy stored in the past. These trade-offs or consumption preferences of the household are modeled as utility functions using consumer theory. We introduce two different utility functions, one for cost minimization and another for consumption balancing/leveling, that are maximized subject to respective budget, consumption, storage and savings constraints to solve for the optimum consumption profile. The optimization problem of a household with energy storage is formulated as a geometric program for consumption balancing/leveling, while cost minimization is formulated as a linear programming problem. Simulation results show that the proposed model achieves extremely low peak to average ratio in the consumption balancing/leveling scheme with about 8% reduction in consumption costs and the least possible amount for electricity bill with about 12% reduction in consumption costs in the cost minimization scheme.
Miners in a blockchain system are suffering from ever-increasing storage costs, which in general have not been properly compensated by the users transaction fees. This reduces the incentives for the miners participation and may jeopardize the blockchain security. We propose to mitigate this blockchain insufficient fee issue through a Fee and Waiting Tax (FWT) mechanism, which explicitly considers the two types of negative externalities in the system. Specifically, we model the interactions between the protocol designer, users, and miners as a three-stage Stackelberg game. By characterizing the equilibrium of the game, we find that miners neglecting the negative externality in transaction selection cause they are willing to accept insufficient-fee transactions. This leads to the insufficient storage fee issue in the existing protocol. Moreover, our proposed optimal FWT mechanism can motivate users to pay sufficient transaction fees to cover the storage costs and achieve the unconstrained social optimum. Numerical results show that the optimal FWT mechanism guarantees sufficient transaction fees and achieves an average social welfare improvement of 33.73% or more over the existing protocol. Furthermore, the optimal FWT mechanism achieves the maximum fairness index and performs well even under heterogeneous-storage-cost miners.
Insurance is one of the fundamental services offered to the citizens to reduce their costs and assist them in case of an emergency. One of the most important challenges in the insurance industry is to address liability challenge and the forging of documents by the involved parties, i.e., insurance company or the users, in order to increase financial gain. Conventional methods to address this challenge is significantly time consuming and costly and also suffers from lock of transparency. In this paper, we propose a blockchain-based solution for the insurance industry in smart cities (BIS). BIS creates a big umbrella that consists of the smart city managers, insurance companies, users, and sensors and devices. The users are known by changeable Public Keys (PKs) that introduces a level of anonymity. The data collected by the sensors is stored in cloud or local storage and is shared with insurance company on demand to find the liable party that in turn increases the privacy of the users. BIS enables the users to prove and share the history of their insurances with other users or insurances. Using Proof of Concept (POC) implementation we demonstrated the applicability of blockchain in insurance industry. The implementation results prove that BIS significantly reduces delay involved in insurance industry as compared with conventional insurance methods.
The main problem faced by smart contract platforms is the amount of time and computational power required to reach consensus. In a classical blockchain model, each operation is in fact performed by each node, both to update the status and to validate the results of the calculations performed by others. In this short survey we sketch some state-of-the-art approaches to obtain an efficient and scalable computation of smart contracts. Particular emphasis is given to sharding, a promising method that allows parallelization and therefore a more efficient management of the computational resources of the network.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
