Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMechanical Properties of Protomene: A Molecular Dynamics Investigation
95
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have not been investigated. In this work, we have investigated protomene mechanical behavior under tensile strain through fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, as available in the LAMMPS code. At room temperature, our results show that the protomene is very stable and the obtained ultimate strength and ultimate stress indicates an anisotropic behavior. The highest ultimate strength was obtained for the x-direction, with a value of ~110 GPa. As for the ultimate strain, the highest one was for the z-direction (~25% of strain) before protomene mechanical fracture.
rate research
Read More
Carbon nitride-based nanostructures have attracted special attention (from theory and experiments) due to their remarkable electromechanical properties. In this work we have investigated the mechanical properties of some graphene-like carbon nitride membranes through fully atomistic reactive molecular dynamics simulations. We have analyzed three different structures of these CN families, the so-called graphene-based g-CN, triazine-based g-C3N4 and heptazine-based g-C3N4. The stretching dynamics of these membranes was studied for deformations along their two main axes and at three different temperatures: 10K, 300K and 600K. We show that g-CN membranes have the lowest ultimate fracture strain value, followed by heptazine-based and triazine-based ones, respectively. This behavior can be explained in terms of their differences in terms of density values, topologies and types of chemical bonds. The dependency of the fracture patterns on the stretching directions is also discussed.
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond surfaces to study electronic properties, which is far from the experimentally observed hydrogen coverage. In this work, we have carried out a detailed study using fully atomistic reactive molecular dynamics (MD) simulations on low indices diamond surfaces i.e. (001), (013), (110), (113) and (111) to evaluate the quality and hydrogenation thresholds on different diamond surfaces and their possible effects on electronic properties. Our simulation results indicate that the 100% surface hydrogenation in these surfaces is hard to achieve because of the steric repulsion between the terminated hydrogen atoms. Among all the considered surfaces, the (001), (110), and (113) surfaces incorporate a larger number of hydrogen atoms and passivate the surface dangling bonds. Our results on hydrogen stability also suggest that these surfaces with optimum hydrogen coverage are robust under extreme conditions and could provide homogeneous p-type surface conductivity in the diamond surfaces, a key requirement for high-field, high-frequency device applications.
Anisotropic materials, with orientation-dependent properties, have attracted more and more attention due to their compelling tunable and flexible performance in electronic and optomechanical devices. So far, two-dimensional (2D) black phosphorus shows the largest known anisotropic behavior, which is highly desired for synaptic and neuromorphic devices, multifunctional directional memories, and even polarization-sensitive photodetector, whereas it is unstable at ambient conditions. Recently, 2D few-layered As2S3 with superior chemical stability was successfully exfoliated in experiments. However, the electronic and mechanical properties of monolayer and bilayer As2S3 is still lacking. Here, we report the large anisotropic electronic and mechanical properties of As2S3 systems through first-principles calculations and general angle-dependent Hookes law. Monolayer and bilayer As2S3 exhibit anisotropic factors of Youngs modulus of 3.15 and 3.32, respectively, which are larger than the black phosphorous with experimentally confirmed and an anisotropic factor of 2. This study provides an effective route to flexible orientation-dependent nanoelectronics, nanomechanics, and offers implications in promoting related experimental investigations.
Schwarzites are crystalline, 3D porous structures with stable negative curvature formed of sp2-hybridized carbon atoms. These structures present topologies with tunable porous size and shape and unusual mechanical properties. In this work, we have investigated the mechanical behavior under compressive strains and energy absorption of four different Schwarzites, through reactive molecular dynamics simulations, using the ReaxFF force field as available in the LAMMPS code. We considered two Schwarzites families, the so-called Gyroid and Primitive and two structures from each family. Our results also show they exhibit remarkable resilience under mechanical compression. They can be reduced to half of their original size before structural failure (fracture) occurs.
In this study, we report the mechanical properties and fracture mechanism of pre-cracked and defected InSe nanosheet samples using molecular dynamics (MD) simulations. We noticed that the failure of pre-cracked and defected InSe nanosheet is governed by brittle type fracture. Armchair directional bonds exhibit a greater resistance for crack propagation relative to the zigzag directional ones. Thus, fracture strength of the pre-cracked sheet is slightly higher for zigzag directional loading than that for armchair. We evaluated the limitation of the applicability of Griffiths criterion for single layer (SL) InSe sheet for nano-cracks as the brittle failure of Griffith prediction demonstrates significant differences with the MD fracture strength. We inspected the effect of temperature on the mechanical properties of the pre-cracked samples of SLInSe. We also discussed the fracture mechanism of both defected and pre-cracked structure at length.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
