No Arabic abstract
For the first time in human history, technologies have matured sufficiently to enable a mission capable of discovering and characterizing habitable planets like Earth orbiting sunlike stars other than the Sun. At the same time, such a platform would enable unique science not possible from ground-based facilities. This science is broad and exciting, ranging from new investigations of our own solar system to a full range of astrophysics disciplines. The Habitable Exoplanet Observatory, or HabEx, is one of four studies currently being undertaken by NASA in preparation for the 2020 Astrophysics Decadal Survey. HabEx has been designed to be the Great Observatory of the 2030s, with community involvement through a competed and funded Guest Observer (GO) program. This interim report describes the HabEx baseline concept, which is a space-based 4-meter diameter telescope mission concept with ultraviolet (UV), optical, and near-infrared (near-IR) imaging and spectroscopy capabilities. More information on HabEx can be found at https://www.jpl.nasa.gov/habex
The Habitable Exoplanet Observatory, or HabEx, has been designed to be the Great Observatory of the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable space-based telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars in order to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx is a space telescope with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR. These capabilities allow for a broad suite of compelling science that cuts across the entire NASA astrophysics portfolio. HabEx has three primary science goals: (1) Seek out nearby worlds and explore their habitability; (2) Map out nearby planetary systems and understand the diversity of the worlds they contain; (3) Enable new explorations of astrophysical systems from our own solar system to external galaxies by extending our reach in the UV through near-IR. This Great Observatory science will be selected through a competed GO program, and will account for about 50% of the HabEx primary mission. The preferred HabEx architecture is a 4m, monolithic, off-axis telescope that is diffraction-limited at 0.4 microns and is in an L2 orbit. HabEx employs two starlight suppression systems: a coronagraph and a starshade, each with their own dedicated instrument.
The Origins Space Telescope (OST) will transform our understanding of the Universe, from formation of the earliest galaxies to the creation of habitable worlds. OSTs Mission Concept 1, the subject of this report, features a cold (4 K) large-aperture telescope (9.1 m) and five powerful instruments, providing imaging and spectroscopy over a wavelength range from 5 to 660 microns. OSTs dramatic increase in sensitivity over previous missions ensures breakthrough discoveries in a broad range of astrophysics disciplines.
The Origins Space Telescope (Origins) traces our cosmic history, from the formation of the first galaxies and the rise of metals to the development of habitable worlds and present-day life. Origins does this through exquisite sensitivity to infrared radiation from ions, atoms, molecules, dust, water vapor and ice, and observations of extra-solar planetary atmospheres, protoplanetary disks, and large-area extragalactic fields. Origins operates in the wavelength range 2.8 to 588 microns and is 1000 times more sensitive than its predecessors due to its large, cold (4.5 K) telescope and advanced instruments. Origins was one of four large missions studied by the community with support from NASA and industry in preparation for the 2020 Decadal Survey in Astrophysics. This is the final study report.
LOFT-P is a concept for a NASA Astrophysics Probe-Class (<$1B) X-ray timing mission, based on the LOFT concept originally proposed to ESAs M3 and M4 calls. LOFT-P requires very large collecting area (>6 m^2, >10x RXTE), high time resolution, good spectral resolution, broad-band spectral coverage (2-30 keV), highly flexible scheduling, and an ability to detect and respond promptly to time-critical targets of opportunity. It addresses science questions such as: What is the equation of state of ultra dense matter? What are the effects of strong gravity on matter spiraling into black holes? It would be optimized for sub-millisecond timing to study phenomena at the natural timescales of neutron star surfaces and black hole event horizons and to measure mass and spin of black holes. These measurements are synergistic to imaging and high-resolution spectroscopy instruments, addressing much smaller distance scales than are possible without very long baseline X-ray interferometry, and using complementary techniques to address the geometry and dynamics of emission regions. A sky monitor (2-50 keV) acts as a trigger for pointed observations, providing high duty cycle, high time resolution monitoring of the X-ray sky with ~20 times the sensitivity of the RXTE All-Sky Monitor, enabling multi-wavelength and multi-messenger studies. A probe-class mission concept would employ lightweight collimator technology and large-area solid-state detectors, technologies which have been recently greatly advanced during the ESA M3 study. Given the large community interested in LOFT (>800 supporters, the scientific productivity of this mission is expected to be very high, similar to or greater than RXTE (~2000 refereed publications). We describe the results of a study, recently completed by the MSFC Advanced Concepts Office, that demonstrates that LOFT-P is feasible within a NASA probe-class mission budget.
The NASA Exoplanet Program Analysis Group (ExoPAG) has undertaken an effort to define mission Level 1 requirements for exoplanet direct detection missions at a range of sizes. This report outlines the science goals and requirements for the next exoplanet flagship imaging and spectroscopy mission as determined by the flagship mission Study Analysis Group (SAG) of the NASA Exoplanet Program Analysis Group (ExoPAG). We expect that these goals and requirements will be used to evaluate specific architectures for a future flagship exoplanet imaging and spectroscopy mission, and we expect this effort to serve as a guide and template for similar goals and requirements for smaller missions, an effort that we expect will begin soon. These goals and requirements were discussed, determined, and documented over a 1 year period with contributions from approximately 60 volunteer exoplanet scientists, technologists, and engineers. Numerous teleconferences, emails, and several in-person meetings were conducted to progress on this task, resulting in creating and improving drafts of mission science goals and requirements. That work has been documented in this report as a set of science goals, more detailed objectives, and specific requirements with deliberate flow-down and linkage between each of these sets. The specific requirements have been developed in two categories: Musts are nonnegotiable hard requirements, while Discriminator requirements assign value to performance in areas beyond the floor values set by the Musts. We believe that this framework and content will ensure that this report will be valuable when applied to future mission evaluation activities. We envision that any future exoplanet imaging flagship mission must also be capable of conducting a broad range of other observational astrophysics. We expect that this will be done by the NASA Cosmic Origins Program Analysis Group (COPAG).