Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOptimum Transmission Rate in Fading Channels with Markovian Sources and QoS Constraints
134
0
0.0
(
0
)
Added by
Mohammad Shehab
Publication date
2018
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
This paper evaluates the performance of reliability and latency in machine type communication networks, which composed of single transmitter and receiver in the presence of Rayleigh fading channel. The sources traffic arrivals are modeled as Markovian processes namely Discrete-Time Markov process, Fluid Markov process, and Markov Modulated Poisson process, and delay/buffer overflow constraints are imposed. Our approach is based on the reliability and latency outage probability, where transmitter not knowing the channel condition, therefore the transmitter would be transmitting information over the fixed rate. The fixed rate transmission is modeled as a two state Discrete time Markov process, which identifies the reliability level of wireless transmission. Using effective bandwidth and effective capacity theories, we evaluate the trade-off between reliability-latency and identify QoS requirement. The impact of different source traffic originated from MTC devices under QoS constraints on the effective transmission rate are investigated.
rate research
Read More
Flat-fading channels that are correlated in time are considered under peak and average power constraints. For discrete-time channels, a new upper bound on the capacity per unit time is derived. A low SNR analysis of a full-scattering vector channel is used to derive a complimentary lower bound. Together, these bounds allow us to identify the exact scaling of channel capacity for a fixed peak to average ratio, as the average power converges to zero. The upper bound is also asymptotically tight as the average power converges to zero for a fixed peak power. For a continuous time infinite bandwidth channel, Viterbi identified the capacity for M-FSK modulation. Recently, Zhang and Laneman showed that the capacity can be achieved with non-bursty signaling (QPSK). An additional contribution of this paper is to obtain similar results under peak and average power constraints.
Training-based transmission over Rayleigh block-fading multiple-input multiple-output (MIMO) channels is investigated. As a training method a combination of a pilot-assisted scheme and a biased signaling scheme is considered. The achievable rates of successive decoding (SD) receivers based on the linear minimum mean-squared error (LMMSE) channel estimation are analyzed in the large-system limit, by using the replica method under the assumption of replica symmetry. It is shown that negligible pilot information is best in terms of the achievable rates of the SD receivers in the large-system limit. The obtained analytical formulas of the achievable rates can improve the existing lower bound on the capacity of the MIMO channel with no channel state information (CSI), derived by Hassibi and Hochwald, for all signal-to-noise ratios (SNRs). The comparison between the obtained bound and a high SNR approximation of the channel capacity, derived by Zheng and Tse, implies that the high SNR approximation is unreliable unless quite high SNR is considered. Energy efficiency in the low SNR regime is also investigated in terms of the power per information bit required for reliable communication. The required minimum power is shown to be achieved at a positive rate for the SD receiver with no CSI, whereas it is achieved in the zero-rate limit for the case of perfect CSI available at the receiver. Moreover, numerical simulations imply that the presented large-system analysis can provide a good approximation for not so large systems. The results in this paper imply that SD schemes can provide a significant performance gain in the low-to-moderate SNR regimes, compared to conventional receivers based on one-shot channel estimation.
This paper investigates delay-distortion-power trade offs in transmission of quasi-stationary sources over block fading channels by studying encoder and decoder buffering techniques to smooth out the source and channel variations. Four source and channel coding schemes that consider buffer and power constraints are presented to minimize the reconstructed source distortion. The first one is a high performance scheme, which benefits from optimized source and channel rate adaptation. In the second scheme, the channel coding rate is fixed and optimized along with transmission power with respect to channel and source variations; hence this scheme enjoys simplicity of implementation. The two last schemes have fixed transmission power with optimized adaptive or fixed channel coding rate. For all the proposed schemes, closed form solutions for mean distortion, optimized rate and power are provided and in the high SNR regime, the mean distortion exponent and the asymptotic mean power gains are derived. The proposed schemes with buffering exploit the diversity due to source and channel variations. Specifically, when the buffer size is limited, fixed channel rate adaptive power scheme outperforms an adaptive rate fixed power scheme. Furthermore, analytical and numerical results demonstrate that with limited buffer size, the system performance in terms of reconstructed signal SNR saturates as transmission power is increased, suggesting that appropriate buffer size selection is important to achieve a desired reconstruction quality.
The fading wire-tap channel is investigated, where the source-to-destination channel and the source-to-wire-tapper channel are corrupted by multiplicative fading gain coefficients in addition to additive Gaussian noise terms. The channel state information is assumed to be known at both the transmitter and the receiver. The parallel wire-tap channel with independent subchannels is first studied, which serves as an information-theoretic model for the fading wire-tap channel. The secrecy capacity of the parallel wire-tap channel is established. This result is then specialized to give the secrecy capacity of the fading wire-tap channel, which is achieved with the source node dynamically changing the power allocation according to the channel state realization. An optimal source power allocation is obtained to achieve the secrecy capacity.
We study channel capacity when a one-bit quantizer is employed at the output of the discrete-time average-power-limited Rayleigh-fading channel. We focus on the low signal-to-noise ratio regime, where communication at very low spectral efficiencies takes place, as in Spread Spectrum and Ultra-Wideband communications. We demonstrate that, in this regime, the best one-bit quantizer does not reduce the asymptotic capacity of the coherent channel, but it does reduce that of the noncoherent channel.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
