Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPhase Modulators Based on High Mobility Ambipolar ReSe2 Field-Effect Transistors
300
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We fabricated ambipolar field-effect transistors (FETs) from multi-layered triclinic ReSe2, mechanically exfoliated onto a SiO2 layer grown on p-doped Si. In contrast to previous reports on thin layers (~2 to 3 layers), we extract field-effect carrier mobilities in excess of 10^2 cm^2/Vs at room temperature in crystals with nearly ~10 atomic layers. These thicker FETs also show nearly zero threshold gate voltage for conduction and high ON to OFF current ratios when compared to the FETs built from thinner layers. We also demonstrate that it is possible to utilize this ambipolarity to fabricate logical elements or digital synthesizers. For instance, we demonstrate that one can produce simple, gate-voltage tunable phase modulators with the ability to shift the phase of the input signal by either 90^o or nearly 180^o. Given that it is possible to engineer these same elements with improved architectures, for example on h-BN in order to decrease the threshold gate voltage and increase the carrier mobilities, it is possible to improve their characteristics in order to engineer ultra-thin layered logic elements based on ReSe2.
rate research
Read More
Detectors of high-frequency radiation based on high-electron-mobility transistors benefit from low noise, room-temperature operation, and the possibility to perform radiation spectroscopy using gate-tunable plasmon resonance. Despite successful proof-of-concept demonstrations, the responsivity of transistor-based detectors of THz radiation, at present, remains fairly poor. To resolve this problem, we propose a class of devices supporting singular plasmon modes, i.e. modes with strong electric fields near keen electrodes. A large plasmon-enhanced electric field results in amplified non-linearities, and thus efficient ac-to-dc conversion. We analyze sub-terahertz detectors based on a two-dimensional electron system (2DES) in the Corbino geometry as a prototypical and exactly solvable model and show that the responsivity scales as $1/r_0^{2}$ with the radius of the inner contact $r_0$. This enables responsivities exceeding 10 kV/W at sub-THz frequencies for nanometer-scale contacts readily accessible by modern nanofabrication techniques.
We demonstrate dual-gated $p$-type field-effect transistors (FETs) based on few-layer tungsten diselenide (WSe$_2$) using high work-function platinum source/drain contacts, and a hexagonal boron nitride top-gate dielectric. A device topology with contacts underneath the WSe$_2$ results in $p$-FETs with $I_{ON}$/$I_{OFF}$ ratios exceeding 10$^7$, and contacts that remain Ohmic down to cryogenic temperatures. The output characteristics show current saturation and gate tunable negative differential resistance. The devices show intrinsic hole mobilities around 140 cm$^2$/Vs at room temperature, and approaching 4,000 cm$^2$/Vs at 2 K. Temperature-dependent transport measurements show a metal-insulator transition, with an insulating phase at low densities, and a metallic phase at high densities. The mobility shows a strong temperature dependence consistent with phonon scattering, and saturates at low temperatures, possibly limited by Coulomb scattering, or defects.
The current integrated circuit (IC) technology based on conventional MOS-FET (metal-oxide-semiconductor field-effect transistor) is approaching the limit of miniaturization with increasing demand on energy. Several analog circuit applications based on graphene FETs have been demonstrated with less components comparing to the conventional technology. However, low on/off current ratio caused by the semimetal nature of graphene has severely hindered its practical applications. Here we report a graphene/MoTe2 van der Waals (vdW) vertical transistor with V-shaped ambipolar field effect transfer characteristics to overcome this challenge. Investigations on temperature dependence of transport properties reveal that gate tunable asymmetric barriers of the devices are account for the ambipolar behaviors. Furthermore, to demonstrate the analog circuit applications of such vdW vertical transistors, we successfully realized output polarity controllable (OPC) amplifier and frequency doubler. These results enable vdW heterojunction based electronic devices to open up new possibilities for wide perspective in telecommunication field.
A few-layer palladium diselenide (PdSe2) field effect transistor is studied under external stimuli such as electrical and optical fields, electron irradiation and gas pressure. We observe ambipolar conduction and hysteresis in the transfer curves of the PdSe2 material unprotected and as-exfoliated. We tune the ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments. The prevailing p-type transport observed at room pressure is reversibly turned into dominant n-type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristic of the device as required in high-performance logic circuits. The transistor is immune from short channel effects but is affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after several minutes anneal at room temperature. The work paves the way toward the exploitation of PdSe2 in electronic devices by providing an experiment-based and deeper understanding of charge transport in PdSe2 transistors subjected to electrical stress and other external agents.
We report the fabrication of back-gated field-effect transistors (FETs) using ultra-thin, mechanically exfoliated MoSe2 flakes. The MoSe2 FETs are n-type and possess a high gate modulation, with On/Off ratios larger than 106. The devices show asymmetric characteristics upon swapping the source and drain, a finding explained by the presence of Schottky barriers at the metal contact/MoSe2 interface. Using four-point, back-gated devices we measure the intrinsic conductivity and mobility of MoSe2 as a function of gate bias, and temperature. Samples with a room temperature mobility of ~50 cm2/V.s show a strong temperature dependence, suggesting phonons are a dominant scattering mechanism.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
