Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEpitaxial strain modulated electronic properties of interface controlled nickelate superlattice
69
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Perovskite nickelate heterostructure consisting of single unit cell of EuNiO$_3$ and LaNiO$_3$ have been grown on a set of single crystalline substrates by pulsed laser interval deposition to investigate the effect of epitaxial strain on electronic and magnetic properties at the extreme interface limit. Despite the variation of substrate in-plane lattice constants and lattice symmetry, the structural response to heterostructuring is primarily controlled by the presence of EuNiO$_3$ layer. In sharp contrast to bulk LaNiO$_3$ or EuNiO$_3$, the superlattices grown under tensile strains exhibit metal to insulator transition (MIT) below room temperature. The onset of magnetic and electronic transitions associated with the MIT can be further separated by application of large tensile strain. Furthermore, these transitions can be entirely suppressed by very small compressive strain. X-ray resonant absorption spectroscopy measurements reveal that such strain-controlled MIT is directly linked to strain induced self-doping effect without any chemical doping.
rate research
Read More
We report the synthesis of Ca$_2$RuO$_4$ thin films on NdCaAlO$_{4}$ (110), LaAlO$_3$ (100) and LaSrAlO$_4$ (001) substrates and show that epitaxial strain induces a transition from the Mott-insulating phase of bulk Ca$_2$RuO$_4$ into a metallic phase. Magnetometry and spin-polarized neutron reflectometry reveal a low-temperature, small-moment ferromagnetic state in metallic Ca$_2$RuO$_4$ films.
An interface modification of LCMO-BTO superlattices was found to massively influence magnetic and magnetotransport properties. Moreover it determines the crystal structure of the manganite layers, changing it from orthorhombic (Pnma) for the conventional superlattice (cSL), to rhombohedral (R-3c) for the modified one (mSL). While the cSL shows extremely nonlinear ac transport, the mSL is an electrically homogeneous material. The observations go beyond an oversimplified picture of dead interface layers and evidence the importance of electronic correlations at perovskite interfaces.
Strong interplay of fundamental order parameters in complex oxides are known to give rise to exotic physical phenomena. The 4d transition metal oxide SrRhO3 has generated much interest, but advances have been hindered by difficulties in preparing single crystalline phases. Here, we have epitaxially stabilized high quality single crystalline SrRhO3 films and investigated their structural, electronic, and magnetic properties. We determine that their properties significantly differ from the paramagnetic metallic ground state that governs bulk samples and are strongly related to rotations of the RhO6 octahedra.
Strain is a leading candidate for controlling magnetoelectric coupling in multiferroics. Here, we use x-ray diffraction to study the coupling between magnetic order and structural distortion in epitaxial films of the orthorhombic (o-) perovskite LuMnO$_3$. An antiferromagnetic spin canting in the E-type magnetic structure is shown to be related to the ferroelectrically induced structural distortion and to a change in the magnetic propagation vector. By comparing films of different orientations and thicknesses, these quantities are found to be controlled by b-axis strain. It is shown that compressive strain destabilizes the commensurate E-type structure and reduces its accompanying ferroelectric distortion.
A combined analysis of x-ray absorption and resonant reflectivity data was used to obtain the orbital polarization profiles of superlattices composed of four-unit-cell-thick layers of metallic LaNiO3 and layers of insulating RXO3 (R=La, Gd, Dy and X=Al, Ga, Sc), grown on substrates that impose either compressive or tensile strain. This superlattice geometry allowed us to partly separate the influence of epitaxial strain from interfacial effects controlled by the chemical composition of the insulating blocking layers. Our quantitative analysis reveal orbital polarizations up to 25%. We further show that strain is the most effective control parameter, whereas the influence of the chemical composition of the blocking layers is comparatively small.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
