Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThermal Conductivity of Polymers and Their Nanocomposites
130
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Polymers are usually considered as thermal insulators and their applications are limited by their low thermal conductivity. However, recent studies showed that certain polymers have surprisingly high thermal conductivity, some of which are comparable to that in poor metals or even silicon. In this review, we outline the experimental achievements and theoretical progress of thermal transport in polymers and their nanocomposites. The open questions and challenges of existing theories are discussed. Special attention is given to the mechanism of thermal transport, the enhancement of thermal conductivity in polymer nanocomposites/fibers, and their potential application as thermal interface materials.
rate research
Read More
Non-equilibrium molecular dynamics is used to investigate the heat current due to the atomic lattice vibrations in graphene nanoribbons and nanorings under a thermal gradient. We consider a wide range of temperature, nanoribbon widths up to 6nm and the effect of moderate edge disorder. We find that narrow graphene nanorings can efficiently suppress the lattice thermal conductivity at low temperatures (~100K), as compared to nanoribbons of the same width. Remarkably, rough edges do not appear to have a large impact on lattice energy transport through graphene nanorings while nanoribbons seem more affected by imperfections. Furthermore, we demonstrate that the effects of hydrogen-saturated edges can be neglected in these graphene nanostructures.
We report a record low thermal conductivity in polycrystalline MoS2 obtained by varying grain sizes and orientations in ultrathin films. By optimizing the sulphurisation parameters of nanometre-thick Mo layer, we could grow MoS2 films with tuneable morphologies. The thermal conductivity is extracted from a Raman laser power-dependent study on suspended samples. The lowest value of thermal conductivity of 0.27 Wm-1K-1, which reaches a similar value as teflon, is obtained in a polycrystalline sample formed by a combination of horizontally and vertically oriented grains, with respect to the bulk (001) monocrystal. Analysis by means of molecular dynamics and finite element method simulations confirm that such grain arrangement leads to lower grain boundary conductance. We discuss the possible use of these thermal insulating films in the context of electronics and thermoelectricity.
Micro/nano porous polymeric material is considered a unique industrial material due to its extremely low thermal conductivity, low density, and high surface area. Therefore, it is necessary to establish an accurate thermal conductivity prediction model suiting their applicable conditions and provide a theoretical basis for expanding of their applications. In this work, the development of the calculation model of equivalent thermal conductivity of micro/nano porous polymeric materials in recent years was summarized. Firstly, it reviews the process of establishing the overall equivalent thermal conductivity calculation model for micro/nano porous polymers. Then, the predicted calculation models of thermal conductivity are introduced according to the conductive thermal conductivity models and the radiative thermal conductivity models separately. In addition, the thermal conduction part is divided into the gaseous thermal conductivity model, solid thermal conductivity model and gas-solid coupling model. Finally, it is concluded that, compared with other porous materials, there are few studies on heat transfer of micro/nano porous polymers, especially on the special heat transfer mechanisms such as scale effects at the micro/nanoscale. In particular, the following aspects of porous polymers still need to be further studied: micro scaled thermal radiation, heat transfer characteristics of special morphologies at the nanoscale, heat transfer mechanism and impact factors of micro/nano porous polymers. Such studies would provide a more accurate prediction of thermal conductivity and a wider application in energy conversion and storage systems.
Modifying phonon thermal conductivity in nanomaterials is important not only for fundamental research but also for practical applications. However, the experiments on tailoring the thermal conductivity in nanoscale, especially in two-dimensional materials, are rare due to technical challenges. In this work, we demonstrate in-situ thermal conduction measurement of MoS2 and find that its thermal conductivity can be continuously tuned to a required value from crystalline to amorphous limits. The reduction of thermal conductivity is understood from phonon-defects scatterings that decrease the phonon transmission coefficient. Beyond a threshold, a sharp drop in thermal conductivity is observed, which is believed to be a crystalline-amorphous transition. Our method and results provide guidance for potential applications in thermoelectrics, photoelectronics, and energy harvesting where thermal management is critical with further integration and miniaturization.
We report a new approach to the thermal conductivity manipulation -- substrate coupling. Generally, the phonon scattering with substrates can decrease the thermal conductivity, as observed in recent experiments. However, we find that at certain regions, the coupling to substrates can increase the thermal conductivity due to a reduction of anharmonic phonon scattering induced by shift of the phonon band to the low wave vector. In this way, the thermal conductivity can be efficiently manipulated via coupling to different substrates, without changing or destroying the material structures. This idea is demonstrated by calculating the thermal conductivity of modified double-walled carbon nanotubes and also by the ice nanotubes coupled within carbon nanotubes.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
