Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCoding for Channels with SNR Variation: Spatial Coupling and Efficient Interleaving
67
0
0.0
(
0
)
Added by
Homa Esfahanizadeh
Publication date
2018
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
In magnetic-recording systems, consecutive sections experience different signal to noise ratios (SNRs). To perform error correction over these systems, one approach is to use an individual block code for each section. However, the performance over a section affected by a lower SNR is weaker compared to the performance over a section affected by a higher SNR. Spatially-coupled (SC) codes are a family of graph-based codes with capacity approaching performance and low latency decoding. An SC code is constructed by partitioning an underlying block code to several component matrices, and coupling copies of the component matrices together. The contribution of this paper is threefold. First, we present a new partitioning technique to efficiently construct SC codes with column weights 4 and 6. Second, we present an SC code construction for channels with SNR variation. Our SC code construction provides local error correction for each section by means of the underlying codes that cover one section each, and simultaneously, an added level of error correction by means of coupling among the underlying codes. Third, we introduce a low-complexity interleaving scheme specific to SC codes that further improves their performance over channels with SNR variation. Our simulation results show that our SC codes outperform individual block codes by more than 1 and 2 orders of magnitudes in the error floor region compared to the block codes with and without regular interleaving, respectively. This improvement is more pronounced by increasing the memory and column weight.
rate research
Read More
A rateless code-i.e., a rate-compatible family of codes-has the property that codewords of the higher rate codes are prefixes of those of the lower rate ones. A perfect family of such codes is one in which each of the codes in the family is capacity-achieving. We show by construction that perfect rateless codes with low-complexity decoding algorithms exist for additive white Gaussian noise channels. Our construction involves the use of layered encoding and successive decoding, together with repetition using time-varying layer weights. As an illustration of our framework, we design a practical three-rate code family. We further construct rich sets of near-perfect rateless codes within our architecture that require either significantly fewer layers or lower complexity than their perfect counterparts. Variations of the basic construction are also developed, including one for time-varying channels in which there is no a priori stochastic model.
We consider spatially coupled code ensembles. A particular instance are convolutional LDPC ensembles. It was recently shown that, for transmission over the binary erasure channel, this coupling increases the belief propagation threshold of the ensemble to the maximum a-priori threshold of the underlying component ensemble. We report on empirical evidence which suggest that the same phenomenon also occurs when transmission takes place over a general binary memoryless symmetric channel. This is confirmed both by simulations as well as by computing EBP GEXIT curves and by comparing the empirical BP thresholds of coupled ensembles to the empirically determined MAP thresholds of the underlying regular ensembles. We further consider ways of reducing the rate-loss incurred by such constructions.
In this paper the performance limits and design principles of rateless codes over fading channels are studied. The diversity-multiplexing tradeoff (DMT) is used to analyze the system performance for all possible transmission rates. It is revealed from the analysis that the design of such rateless codes follows the design principle of approximately universal codes for parallel multiple-input multiple-output (MIMO) channels, in which each sub-channel is a MIMO channel. More specifically, it is shown that for a single-input single-output (SISO) channel, the previously developed permutation codes of unit length for parallel channels having rate LR can be transformed directly into rateless codes of length L having multiple rate levels (R, 2R, . . ., LR), to achieve the DMT performance limit.
Non-malleable codes protect against an adversary who can tamper with the coded message by using a tampering function in a specified function family, guaranteeing that the tampering result will only depend on the chosen function and not the coded message. The codes have been motivated for providing protection against tampering with hardware that stores the secret cryptographic keys, and have found significant attention in cryptography. Traditional Shannon model of communication systems assumes the communication channel is perfectly known to the transmitter and the receiver. Arbitrary Varying Channels (AVCs) remove this assumption and have been used to model adversarially controlled channels. Transmission over these channels has been originally studied with the goal of recovering the sent message, and more recently with the goal of detecting tampering with the sent messages. In this paper we introduce non-malleability as the protection goal of message transmission over these channels, and study binary (discrete memoryless) AVCs where possible tampering is modelled by the set of channel states. Our main result is that non-malleability for these channels is achievable at a rate asymptotically approaching 1. We also consider the setting of an AVC with a special state s*, and the additional requirement that the message must be recoverable if s* is applied to all the transmitted bits. We give the outline of a message encoding scheme that in addition to non-malleability, can provide recovery for all s* channel.
Batched network coding (BNC) is a low-complexity solution to network transmission in multi-hop packet networks with packet loss. BNC encodes the source data into batches of packets. As a network coding scheme, the intermediate nodes perform recoding on the received packets belonging to the same batch instead of just forwarding them. A recoding scheme that may generate more recoded packets for batches of a higher rank is also called adaptive recoding. Meanwhile, in order to combat burst packet loss, the transmission of a block of batches can be interleaved. Stream interleaving studied in literature achieves the maximum separation among any two consecutive packets of a batch, but permutes packets across blocks and hence cannot bound the buffer size and the latency. To resolve the issue of stream interleaver, we design an intrablock interleaver for adaptive recoding that can preserve the advantages of using a block interleaver when the number of recoded packets is the same for all batches. We use potential energy in classical mechanics to measure the performance of an interleaver, and propose an algorithm to optimize the interleaver with this performance measure. Our problem formulation and algorithm for intrablock interleaving are also of independent interest.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
