Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPrecision Space Astrometry as a Tool to Find Earth-like Exoplanets
378
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Because of the recent technological advances, the key technologies needed for precision space optical astrometry are now in hand. The Microarcsecond Astrometry Probe (MAP) mission concept is designed to find 1 Earth mass planets at 1AU orbit (scaled to solar luminosity) around the nearest ~90 FGK stars. The MAP payload includes i) a single three-mirror anastigmatic telescope with a 1-m primary mirror and metrology subsystems, and ii) a camera. The camera focal plane consists of 42 detectors, providing a Nyquist sampled FOV of 0.4-deg. Its metrology subsystems ensure that MAP can achieve the 0.8 uas astrometric precision in 1 hr, which is required to detect Earth-like exoplanets in our stellar neighborhood. MAP mission could provide ~10 specific targets for a much larger coronagraphic mission that would measure its spectra. We argue for the development of the space astrometric missions capable of finding Earth-2.0. Given the current technology readiness such missions relying on precision astrometry could be flown in the next decade, perhaps in collaboration with other national space agencies.
rate research
Read More
LOUPE, the Lunar Observatory for Unresolved Polarimetry of the Earth, is a small, robust spectro-polarimeter with a mission to observe the Earth as an exoplanet. Detecting Earth-like planets in stellar habitable zones is one of the key challenges of modern exoplanetary science. Characterising such planets and searching for traces of life requires the direct detection of their signals. LOUPE provides unique spectral flux and polarisation data of sunlight reflected by the Earth, the only planet known to harbor life. This data will be used to test numerical codes to predict signals of Earth-like exoplanets, to test algorithms that retrieve planet properties, and to fine-tune the design and observational strategies of future space observatories. From the Moon, LOUPE will continuously see the entire Earth, enabling it to monitor the signal changes due to the planets daily rotation, weather patterns, and seasons, across all phase angles. Here, we present both the science case and the technology behind LOUPEs instrumental and mission design.
Direct detection and characterization of Earth-like planets around Sun-like stars is a core task for evaluating the prevalence of habitability and life in the Universe. Here, we discuss a promising option for achieving this goal, which is based on placing an occulter in orbit and having it project its shadow onto the E- ELT at the surface of Earth, thus providing a sufficient contrast for imaging and taking spectra of Earth-like planets in the habitable zones of Sun-like stars. Doing so at a sensible fuel budget will require tailored orbits, an occulter with a high area-to-mass ratio, and appropriate instrumentation at the E-ELT. In this White Paper, submitted in response to the ESA Voyage 2050 Call, we outline the fundamental aspects of the concept, and the most important technical developments that will be required to develop a full mission.
We demonstrate a path to hitherto unachievable differential photometric precisions from the ground, both in the optical and near-infrared (NIR), using custom-fabricated beam-shaping diffusers produced using specialized nanofabrication techniques. Such diffusers mold the focal plane image of a star into a broad and stable top-hat shape, minimizing photometric errors due to non-uniform pixel response, atmospheric seeing effects, imperfect guiding, and telescope-induced variable aberrations seen in defocusing. This PSF reshaping significantly increases the achievable dynamic range of our observations, increasing our observing efficiency and thus better averages over scintillation. Diffusers work in both collimated and converging beams. We present diffuser-assisted optical observations demonstrating $62^{+26}_{-16}$ppm precision in 30 minute bins on a nearby bright star 16-Cygni A (V=5.95) using the ARC 3.5m telescope---within a factor of $sim$2 of Keplers photometric precision on the same star. We also show a transit of WASP-85-Ab (V=11.2) and TRES-3b (V=12.4), where the residuals bin down to $180^{+66}_{-41}$ppm in 30 minute bins for WASP-85-Ab---a factor of $sim$4 of the precision achieved by the K2 mission on this target---and to 101ppm for TRES-3b. In the NIR, where diffusers may provide even more significant improvements over the current state of the art, our preliminary tests have demonstrated $137^{+64}_{-36}$ppm precision for a $K_S =10.8$ star on the 200 Hale Telescope. These photometric precisions match or surpass the expected photometric precisions of TESS for the same magnitude range. This technology is inexpensive, scalable, easily adaptable, and can have an important and immediate impact on the observations of transits and secondary eclipses of exoplanets.
Transmission spectroscopy of Earth-like exoplanets is a potential tool for habitability screening. Transiting planets are present-day Rosetta Stones for understanding extrasolar planets because they offer the possibility to characterize giant planet atmospheres and should provide an access to biomarkers in the atmospheres of Earth-like exoplanets, once they are detected. Using the Earth itself as a proxy we show the potential and limits of the transiting technique to detect biomarkers on an Earth-analog exoplanet in transit. We quantify the Earths cross section as a function of wavelength, and show the effect of each atmospheric species, aerosol, and Rayleigh scattering. Clouds do not significantly affect this picture because the opacity of the lower atmosphere from aerosol and Rayleigh losses dominates over cloud losses. We calculate the optimum signal-to-noise ratio for spectral features in the primary eclipse spectrum of an Earth-like exoplanet around a Sun-like star and also M stars, for a 6.5-m telescope in space. We find that the signal to noise values for all important spectral features are on the order of unity or less per transit - except for the closest stars - making it difficult to detect such features in one single transit, and implying that co-adding of many transits will be essential.
The Wide-Field InfraRed Space Telescope (WFIRST) will be capable of delivering precise astrometry for faint sources over the enormous field of view of its main camera, the Wide-Field Imager (WFI). This unprecedented combination will be transformative for the many scientific questions that require precise positions, distances, and velocities of stars. We describe the expectations for the astrometric precision of the WFIRST WFI in different scenarios, illustrate how a broad range of science cases will see significant advances with such data, and identify aspects of WFIRSTs design where small adjustments could greatly improve its power as an astrometric instrument.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
