Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRealfast: Real-Time, Commensal Fast Transient Surveys with the Very Large Array
92
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Radio interferometers have the ability to precisely localize and better characterize the properties of sources. This ability is having a powerful impact on the study of fast radio transients, where a few milliseconds of data is enough to pinpoint a source at cosmological distances. However, recording interferometric data at millisecond cadence produces a terabyte-per-hour data stream that strains networks, computing systems, and archives. This challenge mirrors that of other domains of science, where the science scope is limited by the computational architecture as much as the physical processes at play. Here, we present a solution to this problem in the context of radio transients: realfast, a commensal, fast transient search system at the Jansky Very Large Array. Realfast uses a novel architecture to distribute fast-sampled interferometric data to a 32-node, 64-GPU cluster for real-time imaging and transient detection. By detecting transients in situ, we can trigger the recording of data for those rare, brief instants when the event occurs and reduce the recorded data volume by a factor of 1000. This makes it possible to commensally search a data stream that would otherwise be impossible to record. This system will search for millisecond transients in more than 1000 hours of data per year, potentially localizing several Fast Radio Bursts, pulsars, and other sources of impulsive radio emission. We describe the science scope for realfast, the system design, expected outcomes, and ways real-time analysis can help in other fields of astrophysics.
rate research
Read More
Over the last decade, the continuing decline in the cost of digital computing technology has brought about a dramatic transformation in how digital instrumentation for radio astronomy is developed and operated. In most cases, it is now possible to interface consumer computing hardware, e.g. inexpensive graphics processing units and storage devices, directly to the raw data streams produced by radio telescopes. Such systems bring with them myriad benefits: straightforward upgrade paths, cost savings through leveraging an economy of scale, and a lowered barrier to entry for scientists and engineers seeking to add new instrument capabilities. Additionally, the typical data-interconnect technology used with general-purpose computing hardware -- Ethernet -- naturally permits multiple subscribers to a single raw data stream. This allows multiple science programs to be conducted in parallel. When combined with broad bandwidths and wide primary fields of view, radio telescopes become capable of achieving many science goals simultaneously. Moreover, because many science programs are not strongly dependent on observing cadence and direction (e.g. searches for extraterrestrial intelligence and radio transient surveys), these so-called commensal observing programs can dramatically increase the scientific productivity and discovery potential of an observatory. In this whitepaper, we detail a project to add an Ethernet-based commensal observing mode to the Jansky Very Large Array (VLA), and discuss how this mode could be leveraged to conduct a powerful program to constrain the distribution of advanced life in the universe through a search for radio emission indicative of technology. We also discuss other potential science use-cases for the system, and how the system could be used for technology development towards next-generation processing systems for the Next Generation VLA.
We are developing a purely commensal survey experiment for fast (<5s) transient radio sources. Short-timescale transients are associated with the most energetic and brightest single events in the Universe. Our objective is to cover the enormous volume of transients parameter space made available by ASKAP, with an unprecedented combination of sensitivity and field of view. Fast timescale transients open new vistas on the physics of high brightness temperature emission, extreme states of matter and the physics of strong gravitational fields. In addition, the detection of extragalactic objects affords us an entirely new and extremely sensitive probe on the huge reservoir of baryons present in the IGM. We outline here our approach to the considerable challenge involved in detecting fast transients, particularly the development of hardware fast enough to dedisperse and search the ASKAP data stream at or near real-time rates. Through CRAFT, ASKAP will provide the testbed of many of the key technologies and survey modes proposed for high time resolution science with the SKA.
In almost 30 years of operation, the Very Large Array (VLA) has proved to be a remarkably flexible and productive radio telescope. However, the basic capabilities of the VLA have changed little since it was designed. A major expansion utilizing modern technology is currently underway to improve the capabilities of the VLA by at least an order of magnitude in both sensitivity and in frequency coverage. The primary elements of the Expanded Very Large Array (EVLA) project include new or upgraded receivers for continuous frequency coverage from 1 to 50 GHz, new local oscillator, intermediate frequency, and wide bandwidth data transmission systems to carry signals with 16 GHz total bandwidth from each antenna, and a new digital correlator with the capability to process this bandwidth with an unprecedented number of frequency channels for an imaging array. Also included are a new monitor and control system and new software that will provide telescope ease of use. Scheduled for completion in 2012, the EVLA will provide the world research community with a flexible, powerful, general-purpose telescope to address current and future astronomical issues.
The next generation Very Large Array (ngVLA) is a transformational radio observatory being designed by the U.S. National Radio Astronomy Observatory (NRAO). It will provide order of magnitude improvements in sensitivity, resolution, and uv coverage over the current Jansky Very Large Array (VLA) at ~1.2-50 GHz and extend the frequency range up to 70-115 GHz. This document is a white paper written by members of the Canadian community for the 2020 Long Range Plan panel, which will be making recommendations on Canadas future directions in astronomy. Since Canadians have been historically major users of the VLA and have been valued partners with NRAO for ALMA, Canadas participation in ngVLA is welcome. Canadians have been actually involved in ngVLA discussions for the past five years, and have played leadership roles in the ngVLA Science and Technical Advisory Councils. Canadian technologies are also very attractive for the ngVLA, in particular our designs for radio antennas, receivers, correlates, and data archives, and our industrial capacities to realize them. Indeed, the Canadian designs for the ngVLA antennas and correlator/beamformer are presently the baseline models for the project. Given the size of Canadas radio community and earlier use of the VLA (and ALMA), we recommend Canadian participation in the ngVLA at the 7% level. Such participation would be significant enough to allow Canadian leadership in gVLAs construction and usage. Canadas participation in ngVLA should not preclude its participation in SKA; access to both facilities is necessary to meet Canadas radio astronomy needs. Indeed, ngVLA will fill the gap between those radio frequencies observable with the SKA and ALMA at high sensitivities and resolutions. Canadas partnership in ngVLA will give it access to cutting-edge facilities together covering approximately three orders of magnitude in frequency.
The Allen Telescope Array (ATA) is a Large-Number-Small-Diameter radio telescope array currently with 42 individual antennas and 5 independent back-end science systems (2 imaging FX correlators and 3 time domain beam formers) located at the Hat Creek Radio Observatory (HCRO). The goal of the ATA is to run multiple back-ends simultaneously, supporting multiple science projects commensally. The primary software control systems are based on a combination of Java, JRuby and Ruby on Rails. The primary control API is simplified to provide easy integration with new back-end systems while the lower layers of the software stack are handled by a master observing system. Scheduling observations for the ATA is based on finding a union between the science needs of multiple projects and automatically determining an efficient path to operating the various sub-components to meet those needs. When completed, the ATA is expected to be a world-class radio telescope, combining dedicated SETI projects with numerous radio astronomy science projects.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
