Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRole of the particle size polydispersity in the electrical conductivity of carbon nanotube-epoxy composites
160
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Carbon nanotubes (CTNs) with large aspect-ratios are extensively used to establish electrical connectedness in polymer melts at very low CNT loadings. However, the CNT size polydispersity and the quality of the dispersion are still not fully understood factors that can substantially alter the desired characteristics of CNT nanocomposites. Here we demonstrate that the electrical conductivity of polydisperse CNT-epoxy composites with purposely-tailored distributions of the nanotube length L is a quasiuniversal function of the first moment of L. This finding challenges the current understanding that the conductivity depends upon higher moments of the CNT length. We explain the observed quasiuniversality by a combined effect between the particle size polydispersity and clustering. This mechanism can be exploited to achieve controlled tuning of the electrical transport in general CNT nanocomposites.
rate research
Read More
We present measurements of the frequency and electric field dependent conductivity of single walled carbon nanotube(SWCNT) networks of various densities. The ac conductivity as a function of frequency is consistent with the extended pair approximation model and increases with frequency above an onset frequency $omega_0$ which varies over seven decades with a range of film thickness from sub-monolayer to 200 nm. The nonlinear electric field-dependent DC conductivity shows strong dependence on film thickness as well. Measurement of the electric field dependence of the resistance R(E) allows for the determination of a length scale $L_{E}$ possibly characterizing the distance between tube contacts, which is found to systematically decrease with increasing film thickness. The onset frequency $omega_0$ of ac conductivity and the length scale $L_{E}$ of SWCNT networks are found to be correlated, and a physically reasonable empirical formula relating them has been proposed. Such studies will help the understanding of transport properties and benefit the applications of this material system.
Linear carbon chains (LCCs) have been shown to grow inside double-walled carbon nanotubes (DWCNTs) but isolating them from this hosting material represents one of the most challenging tasks towards applications. Herein we report the extraction and separation of LCCs inside single-wall carbon nanotubes (LCCs@SWCNTs) extracted from a double walled host LCCs@DWCNTs by applying a combined tip-ultrasonic and density gradient ultracentrifugation (DGU) process. High-resolution transmission electron microscopy (HRTEM), optical absorption, and Raman spectroscopy show that not only short LCCs but clearly long LCCs (LLCCs) can be extracted and separated from the host. Moreover, the LLCCs can even be condensed by DGU. The Raman spectral frequency of LCCs remains almost unchanged regardless of the presence of the outer tube of the DWCNTs. This suggests that the major importance of the outer tubes is making the whole synthesis viable. We have also been able to observe the interaction between the LCCs and the inner tubes of DWCNTs, playing a major role in modifying the optical properties of LCCs. Our extraction method suggests the possibility towards the complete isolation of LCCs from CNTs.
We study the size dependence of thermal conductivity in nanoscale semiconducting systems. An analytical formula including the surface scattering and the size confinement effects of phonon transport is derived. The theoretical formula gives good agreements with the existing experimental data for Si and GaAs nanowires and thin films.
Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void formation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can be achieved via additional processing steps such as-mechanical methods and/or chemical functionalization, the resulting composites are somewhat limited in structural and functional performances. Here, we demonstrate that 3D printing technique like-direct ink writing offers improved processing of CNTs-polymer composites. The shear-induced flow of an engineered nanocomposite ink through the micronozzle offers some benefits including reducing the number of voids within the epoxy, improving CNTs dispersion and adhesion with epoxy, and partially aligns the CNTs. Such microstructural changes result in superior mechanical performance and heat transfer in the composites compared to their mold-casted counterparts. This work demonstrates the advantages of 3D printing over traditional fabrication methods, beyond the ability to rapidly fabricate complex architectures, to achieve improved processing dynamics for fabricating CNT-polymer nanocomposites with better structural and functional properties.
We theoretically compute the interface thermal resistance between crossing single walled carbon nanotubes of various chiralities, using an atomistic Greens function approach with semi-empirical potentials. The results are then used to model the thermal conductivity of three dimensional nanotube pellets in vacuum. For an average nanotube length of 1 $mu$m, the model yields an upper bound for the thermal conductivity of densely compacted pellets, of the order of a few W/m-K. This is in striking contrast with the ultra-high thermal conductivity reported on individually suspended nanotubes. The results suggest that nanotube pellets might have an application as thermal insulators.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
