Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCharacterization of coherent quantum frequency combs using electro-optic phase modulation
71
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We demonstrate a two-photon interference experiment for phase coherent biphoton frequency combs (BFCs), created through spectral amplitude filtering of biphotons with a continuous broadband spectrum. By using an electro-optic phase modulator, we project the BFC lines into sidebands that overlap in frequency. The resulting high-visibility interference patterns provide an approach to verify frequency-bin entanglement even with slow single-photon detectors; we show interference patterns with visibilities that surpass the classical threshold for qubit and qutrit states. Additionally, we show that with entangled qutrits, two-photon interference occurs even with projections onto different final frequency states. Finally, we show the versatility of this scheme for weak-light measurements by performing a series of two-dimensional experiments at different signal-idler frequency offsets to measure the dispersion of a single-mode fiber.
rate research
Read More
Electro-optic frequency combs were employed to rapidly interrogate an optomechanical sensor, demonstrating spectral resolution substantially exceeding that possible with a mode-locked frequency comb. Frequency combs were generated using an integrated-circuit-based direct digital synthesizer and utilized in a self-heterodyne configuration. Unlike approaches based upon laser locking or sweeping, the present approach allows rapid, parallel measurements of full optical cavity modes, large dynamic range of sensor displacement, and acquisition across a wide frequency range between DC and 500 kHz. In addition to being well suited to measurements of cavity optomechanical sensors, this optical frequency comb-based approach can be utilized for interrogation in a wide range of physical and chemical sensors.
Multimode nonclassical states of light are an essential resource in quantum computation with continuous variables, for example in cluster state computation. They can be generated either by mixing different squeezed light sources using linear optical operations, or directly in a multimode optical device. In parallel, frequency combs are perfect tools for high precision metrological applications and for quantum time transfer. Synchronously Pumped Optical Parametric Oscillators (SPOPOs) have been theoretically shown to produce multimode non-classical frequency combs. In this paper, we present the first experimental generation and characterization of a femtosecond quantum frequency comb generated by a SPOPO. In particular, we give the experimental evidence of the multimode nature of the generated quantum state and, by studying the spectral noise distribution of this state, we show that at least three nonclassical independent modes are required to describe it.
Quantum memories for light are essential components in quantum technologies like long-distance quantum communication and distributed quantum computing. Recent studies have shown that long optical and spin coherence lifetimes can be observed in rare earth doped nanoparticles, opening exciting possibilities over bulk materials e.g. for enhancing coupling to light and other quantum systems, and material design. Here, we report on coherent light storage in Eu$^{3+}$:Y$_2$O$_3$ nanoparticles using the Stark Echo Modulation Memory (SEMM) quantum protocol. We first measure a nearly constant Stark coefficient of 50 kHz/(V/cm) across a bandwidth of 15 GHz, which is promising for broadband operation. Storage of light using SEMM is then demonstrated for times up to 40 $mu$s. Pulses with two different frequencies are also stored, confirming frequency-multiplexing capability, and are used to demonstrate the memory high phase fidelity.
Electro-optic modulators are utilized ubiquitously ranging from applications in data communication to photonic neural networks. While tremendous progress has been made over the years, efficient phase-shifting modulators are challenged with fundamental tradeoffs, such as voltage-length, index change-losses or energy-bandwidth, and no single solution available checks all boxes. While voltage-driven phase modulators, such as based on lithium niobate, offer low loss and high speed operation, their footprint of 10s of cm-scale is prohibitively large, especially for density-critical applications, for example in photonic neural networks. Ignoring modulators for quantum applications, where loss is critical, here we distinguish between current versus voltage-driven modulators. We focus on the former, since current-based schemes of emerging thin electro-optical materials have shown unity-strong index modulation suitable for heterogeneous integration into foundry waveguides. Here, we provide an in-depth ab-initio analysis of obtainable modulator performance based on heterogeneously integrating low-dimensional materials, i.e. graphene, thin films of indium tin oxide, and transition metal dichalcogenide monolayers into a plurality of optical waveguide designs atop silicon photonics. Using the fundamental modulator tradeoff of energy-bandwidth-product as a design-quality quantifier, we show that a small modal cross section, such as given by plasmonic modes, enables high-performance operation, physically realized by arguments on charge-distribution and low electrical resistance. An in-depth design understanding of phase-modulator performance, beyond doped-junctions in silicon, offers opportunities for micrometer-compact yet energy-bandwidth-ratio constrained modulators with timely opportunities to hardware-accelerate applications beyond data communication towards photonic machine intelligence.
Future quantum computation and networks require scalable monolithic circuits, which incorporate various advanced functionalities on a single physical substrate. Although substantial progress for various applications has already been demonstrated on different platforms, the range of diversified manipulation of photonic states on demand on a single chip has remained limited, especially dynamic time management. Here, we demonstrate an electro-optic device, including photon pair generation, propagation, electro-optical path routing, as well as a voltage-controllable time delay of up to ~ 12 ps on a single Ti:LIbO3 waveguide chip. As an example, we demonstrate Hong-Ou-Mandel interference with a visibility of more than 93$pm$ 1.8%. Our chip not only enables the deliberate manipulation of photonic states by rotating the polarization but also provides precise time control. Our experiment reveals that we have full flexible control over single-qubit operations by harnessing the complete potential of fast on-chip electro-optic modulation.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
