Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA Green function method to study thin diffraction gratings
306
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The anomalous features in diffraction patterns first observed by Wood over a century ago have been the subject of many investigations, both experimental and theoretical. The sharp, narrow structures - and the large resonances with which they are sometimes associated - arise in numerous studies in optics and photonics. In this paper we present an analytical method to study diffracted fields of optically thin gratings that highlights the nonanalyticities associated with the anomalies. Using this approach we can immediately derive diffracted fields for any polarization in a compact notation. While our equations are approximate, they fully respect energy conservation in the electromagnetic field, and describe the large exchanges of energy between incident and diffracted fields that can arise even for thin gratings.
rate research
Read More
Optical properties of a metasurface which can be considered a monolayer of two classical uniaxial metamaterials, parallel-plate and nanorod arrays, are investigated. It is shown that such metasurface acts as an ultimately thin sub-50 nm wave plate. This is achieved via an interplay of epsilon-near-zero and epsilon-near-pole behavior along different axes in the plane of the metasurface allowing for extremely rapid phase difference accumulation in very thin metasurface layers. These effects are shown to not be disrupted by non-locality and can be applied to the design of ultrathin wave plates, Pancharatnam-Berry phase optical elements and plasmon-carrying optical torque wrench devices.
3D ED is an effective technique to determine the structures of submicron- or nano-sized crystals. In this paper, we implemented energy-filtered 3D ED using a Gatan Energy Filter (GIF) in both selected area electron diffraction mode and micro/nanoprobe mode. We explained the setup in detail, which improves the accessibility of energy-filtered 3D ED experiments as more electron microscopes are equipped with a GIF than an in-column filter. We also proposed a crystal tracking method in STEM mode using live HAADF image stream. This method enables us to collect energy-filtered 3D ED datasets in STEM mode with a larger tilt range without foregoing any frames. In order to compare the differences between energy-filtered 3D ED and normal 3D ED data, three crystalline samples have been studied in detail. We observed that the final R1 will improve 20% to 30% for energy-filtered datasets compared with unfiltered datasets and the structure became more reasonable. We also discussed the possible reasons that lead to the improvement.
The GaAs-based material system is well-known for the implementation of InAs quantum dots (QDs) with outstanding optical properties. However, these dots typically emit at a wavelength of around 900nm. The insertion of a metamorphic buffer (MMB) can shift the emission to the technologically attractive telecom C-band range centered at 1550nm. However, the thickness of common MMB designs limits their compatibility with most photonic resonator types. Here we report on the MOVPE growth of a novel InGaAs MMB with a non-linear indium content grading profile designed to maximize plastic relaxation within minimal layer thickness. Single-photon emission at 1550nm from InAs QDs deposited on top of this thin-film MMB is demonstrated. The strength of the new design is proven by integrating it into a bullseye cavity via nano-structuring techniques. The presented advances in the epitaxial growth of QD/MMB structures form the basis for the fabrication of high-quality telecom non-classical light sources as a key component of photonic quantum technologies.
All-reflective interferometer configurations have been proposed for the next generation of gravitational wave detectors, with diffractive elements replacing transmissive optics. However, an additional phase noise creates more stringent conditions for alignment stability. A framework for alignment stability with the use of diffractive elements was required using a Gaussian model. We successfully create such a framework involving modal decomposition to replicate small displacements of the beam (or grating) and show that the modal model does not contain the phase changes seen in an otherwise geometric planewave approach. The modal decomposition description is justified by verifying experimentally that the phase of a diffracted Gaussian beam is independent of the beam shape, achieved by comparing the phase change between a zero-order and first-order mode beam. To interpret our findings we employ a rigorous time-domain simulation to demonstrate that the phase changes resulting from a modal decomposition are correct, provided that the coordinate system which measures the phase is moved simultaneously with the effective beam displacement. This indeed corresponds to the phase change observed in the geometric planewave model. The change in the coordinate system does not instinctively occur within the analytical framework, and therefore requires either a manual change in the coordinate system or an addition of the geometric planewave phase factor.
Measurement modalities in Bragg coherent diffraction imaging (BCDI) rely on finding signal from a single nanoscale crystal object, which satisfies the Bragg condition among a large number of arbitrarily oriented nanocrystals. However, even when the signal from a single Bragg reflection with (hkl) Miller indices is found, the crystallographic axes on the retrieved three-dimensional (3D) image of the crystal remain unknown, and thus, localizing in reciprocal space other Bragg reflections becomes in reality impossible or requires good knowledge of the orientation of the crystal. We report the commissioning of a movable double-bounce Si (111) monochromator at the 34-ID-C end station of the Advanced Photon Source, which aims at delivering multi-reflection BCDI as a standard tool in a single beamline instrument. The new instrument enables this through rapid switching from monochromatic to broadband (pink) beam permitting the use of Laue diffraction to determine crystal orientation. With a proper orientation matrix determined for the lattice, one can measure coherent diffraction near multiple Bragg peaks, thus providing sufficient information to image the full strain tensor in 3D. We discuss the design, concept of operation, the developed procedures for indexing Laue patterns, and automated measuring of Bragg coherent diffraction data from multiple reflections of the same nanocrystal.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
