Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDynamics and locomotion of flexible foils in a frictional environment
134
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Over the past few decades, oscillating flexible foils have been used to study the physics of organismal propulsion in different fluid environments. Here we extend this work to a study of flexible foils in a frictional environment. When the foil is oscillated by heaving at one end but not allowed to locomote freely, the dynamics change from periodic to non-periodic and chaotic as the heaving amplitude is increased or the bending rigidity is decreased. For friction coefficients lying in a certain range, the transition passes through a sequence of $N$-periodic and asymmetric states before reaching chaotic dynamics. Resonant peaks are damped and shifted by friction and large heaving amplitudes, leading to bistable states. When the foil is allowed to locomote freely, the horizontal motion smoothes the resonant behaviors. For moderate frictional coefficients, steady but slow locomotion is obtained. For large transverse friction and small tangential friction corresponding to wheeled snake robots, faster locomotion is obtained. Traveling wave motions arise spontaneously, and and move with horizontal speed that scales as transverse friction to the 1/4 power and input power that scales as transverse friction to the 5/12 power. These scalings are consistent with a boundary layer form of the solutions near the foils leading edge.
rate research
Read More
We present a unified scaling description for the dynamics of monomers of a semiflexible chain under good solvent condition in the free draining limit. We consider both the cases where the contour length $L$ is comparable to the persistence length $ell_p$ and the case $Lgg ell_p$. Our theory captures the early time monomer dynamics of a stiff chain characterized by $t^{3/4}$ dependence for the mean square displacement(MSD) of the monomers, but predicts a first crossover to the Rouse regime of $t^{2 u/{1+2 u}}$ for $tau_1 sim ell_p^3$, and a second crossover to the purely diffusive dynamics for the entire chain at $tau_2 sim L^{5/2}$. We confirm the predictions of this scaling description by studying monomer dynamics of dilute solution of semi-flexible chains under good solvent conditions obtained from our Brownian dynamics (BD) simulation studies for a large choice of chain lengths with number of monomers per chain N = 16 - 2048 and persistence length $ell_p = 1 - 500$ Lennard-Jones (LJ) units. These BD simulation results further confirm the absence of Gaussian regime for a 2d swollen chain from the slope of the plot of $langle R_N^2 rangle/2L ell_p sim L/ell_p$ which around $L/ell_p sim 1$ changes suddenly from $left(L/ell_p right) rightarrow left(L/ell_p right)^{0.5} $, also manifested in the power law decay for the bond autocorrelation function disproving the validity of the WLC in 2d. We further observe that the normalized transverse fluctuations of the semiflexible chains for different stiffness $sqrt{langle l_{bot}^2rangle}/L$ as a function of renormalized contour length $L/ell_p$ collapse on the same master plot and exhibits power law scaling $sqrt{langle l_{bot}^2rangle}/L sim (L/ell_p)^eta $ at extreme limits, where $eta = 0.5$ for extremely stiff chains ($L/ell_p gg 1$), and $eta = -0.25$ for fully flexible chains.
Muscles are biological actuators extensively studied in the frame of Hills classic empirical model as isolated biomechanical entities, which hardly applies to a living organism subjected to physiological and environmental constraints. Here we elucidate the overarching principle of a emph{living} muscle action for locomotion, considering it from the thermodynamic viewpoint as an assembly of actuators (muscle units) connected in parallel, operating via chemical-to-mechanical energy conversion under mixed (potential and flux) boundary conditions. Introducing the energy cost of effort, $COE_-$, as the generalization of the well-known oxygen cost of transport, $COT$, in the frame of our compact locally linear non-equilibrium thermodynamics model, we analyze oxygen consumption measurement data from a documented experiment on energy cost management and optimization by horses moving at three different gaits. Horses adapt to a particular gait by mobilizing a nearly constant number of muscle units minimizing waste production per unit distance covered; this number significantly changes during transition between gaits. The mechanical function of the animal is therefore determined both by its own thermodynamic characteristics and by the metabolic operating point of the locomotor system.
Granular media (GM) present locomotor challenges for terrestrial and extraterrestrial devices because they can flow and solidify in response to localized intrusion of wheels, limbs, and bodies. While the development of airplanes and submarines is aided by understanding of hydrodynamics, fundamental theory does not yet exist to describe the complex interactions of locomotors with GM. In this paper, we use experimental, computational, and theoretical approaches to develop a terramechanics for bio-inspired locomotion in granular environments. We use a fluidized bed to prepare GM with a desired global packing fraction, and use empirical force measurements and the Discrete Element Method (DEM) to elucidate interaction mechanics during locomotion-relevant intrusions in GM such as vertical penetration and horizontal drag. We develop a resistive force theory (RFT) to account for more complex intrusions. We use these force models to understand the locomotor performance of two bio-inspired robots moving on and within GM.
Motivated by the motion of nematode sperm cells, we present a model for the motion of an adhesive gel on a solid substrate. The gel polymerizes at the leading edge and depolymerizes at the rear. The motion results from a competition between a self-generated swelling gradient and the adhesion on the substrate. The resulting stress provokes the rupture of the adhesion points and allows for the motion. The model predicts an unusual force-velocity relation which depends in significant ways on the point of application of the force.
Compared to agile legged animals, wheeled and tracked vehicles often suffer large performance loss on granular surfaces like sand and gravel. Understanding the mechanics of legged locomotion on granular media can aid the development of legged robots with improved mobility on granular surfaces; however, no general force model yet exists for granular media to predict ground reaction forces during complex limb intrusions. Inspired by a recent study of sand-swimming, we develop a resistive force model in the vertical plane for legged locomotion on granular media. We divide an intruder of complex morphology and kinematics, e.g., a bio-inspired robot L-leg rotated through uniform granular media (loosely packed ~ 1 mm diameter poppy seeds), into small segments, and measure stresses as a function of depth, orientation, and direction of motion using a model leg segment. Summation of segmental forces over the intruder predicts the net forces on both an L-leg and a reversed L-leg rotated through granular media with better accuracy than using simple one-dimensional penetration and drag force models. A multi-body dynamic simulation using the resistive force model predicts the speeds of a small legged robot (15 cm, 150 g) moving on granular media using both L-legs and reversed L-legs.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
