Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userPupil Masks for Spectrophotometry of Transiting Exoplanets
84
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Spectrophotometric stability, which is crucial in the spectral characterization of transiting exoplanets, is affected by photometric variations arising from field-stop loss in space telescopes with pointing jitter or primary mirror deformation. This paper focuses on a new method for removing slit-loss or field-stop-loss photometric variation through the use of a pupil mask. Two types of pupil function are introduced: the first uses conventional (e.g., Gaussian or hyper-Gaussian) apodizing patterns; whereas the second, which we call a block-shaped mask, employs a new type of pupil mask designed for high photometric stability. A methodology for the optimization of a pupil mask for transit observations is also developed. The block-shaped mask can achieve a photometric stability of $10^{-5}$ for a nearly arbitrary field-stop radius when the pointing jitter is smaller than approximately $0.7 lambda/D $ and a photometric stability of $10^{-6}$ at a pointing jitter smaller than approximately $0.5 lambda/D $. The impact of optical aberrations and mask imperfections upon mask performance is also discussed.
rate research
Read More
We report a development of a multi-color simultaneous camera for the 188cm telescope at Okayama Astrophysical Observatory in Japan. The instrument, named MuSCAT, has a capability of 3-color simultaneous imaging in optical wavelength where CCDs are sensitive. MuSCAT is equipped with three 1024x1024 pixel CCDs, which can be controlled independently. The three CCDs detect lights in $g_2$ (400--550 nm), $r_2$ (550--700 nm), and $z_{s,2}$ (820--920 nm) bands using Astrodon Photometrics Generation 2 Sloan filters. The field of view of MuSCAT is 6.1x6.1 arcmin$^2$ with the pixel scale of 0.358 arcsec per pixel. The principal purpose of MuSCAT is to perform high precision multi-color transit photometry. For the purpose, MuSCAT has a capability of self autoguiding which enables to fix positions of stellar images within ~1 pix. We demonstrate relative photometric precisions of 0.101%, 0.074%, and 0.076% in $g_2$, $r_2$, and $z_{s,2}$ bands, respectively, for GJ436 (magnitudes in $g$=11.81, $r$=10.08, and $z$=8.66) with 30 s exposures. The achieved precisions meet our objective, and the instrument is ready for operation.
The space missions TESS and PLATO plan to double the number of 4000 exoplanets already discovered and will measure the size of thousands of exoplanets around the brightest stars in the sky, allowing ground-based radial velocity spectroscopy follow-up to determine the orbit and mass of the detected planets. The new facility we are developing, MARVEL (Raskin et al. this conference), will enable the ground-based follow-up of large numbers of exoplanet detections, expected from TESS and PLATO, which cannot be carried out only by the current facilities that achieve the necessary radial velocity accuracy of 1 m/s or less. This paper presents the MARVEL observation strategy and performance analysis based on predicted PLATO transit detection yield simulations. The resulting observation scenario baseline will help in the instrument design choices and demonstrate the effectiveness of MARVEL as a TESS and PLATO science enabling facility.
For years, the standard procedure to measure radial velocities (RVs) of spectral observations consisted in cross-correlating the spectra with a binary mask, that is, a simple stellar template that contains information on the position and strength of stellar absorption lines. The cross-correlation function (CCF) profiles also provide several indicators of stellar activity. We present a methodology to first build weighted binary masks and, second, to compute the CCF of spectral observations with these masks from which we derive radial velocities and activity indicators. These methods are implemented in a python code that is publicly available. To build the masks, we selected a large number of sharp absorption lines based on the profile of the minima present in high signal-to-noise ratio (S/N) spectrum templates built from observations of reference stars. We computed the CCFs of observed spectra and derived RVs and the following three standard activity indicators: full-width-at-half-maximum as well as contrast and bisector inverse slope.We applied our methodology to CARMENES high-resolution spectra and obtain RV and activity indicator time series of more than 300 M dwarf stars observed for the main CARMENES survey. Compared with the standard CARMENES template matching pipeline, in general we obtain more precise RVs in the cases where the template used in the standard pipeline did not have enough S/N. We also show the behaviour of the three activity indicators for the active star YZ CMi and estimate the absolute RV of the M dwarfs analysed using the CCF RVs.
We introduce a new class of solutions for Apodized Pupil Lyot Coronagraphs (APLC) with segmented aperture telescopes to remove broadband diffracted light from a star with a contrast level of $10^{10}$. These new coronagraphs provide a key advance to enabling direct imaging and spectroscopy of Earth twins with future large space missions. Building on shaped pupil (SP) apodization optimizations, our approach enables two-dimensional optimizations of the system to address any aperture features such as central obstruction, support structures or segment gaps. We illustrate the technique with a design that could reach $10^{10}$ contrast level at 34,mas for a 12,m segmented telescope over a 10% bandpass centered at a wavelength $lambda_0=$500,nm. These designs can be optimized specifically for the presence of a resolved star, and in our example, for stellar angular size up to 1.1,mas. This would allow probing the vicinity of Sun-like stars located beyond 4.4,pc, therefore fully retiring this concern. If the fraction of stars with Earth-like planets is $eta_{Earth}=0.1$, with 18% throughput, assuming a perfect, stable wavefront and considering photon noise only, 12.5 exo-Earth candidates could be detected around nearby stars with this design and a 12,m space telescope during a five-year mission with two years dedicated to exo-Earth detection (one total year of exposure time and another year of overheads). Our new hybrid APLC/SP solutions represent the first numerical solution of a coronagraph based on existing mask technologies and compatible with segmented apertures, and that can provide contrast compatible with detecting and studying Earth-like planets around nearby stars. They represent an important step forward towards enabling these science goals with future large space missions.
This paper describes the design, operations, and performance of the Multi-site All-Sky CAmeRA (MASCARA). Its primary goal is to find new exoplanets transiting bright stars, $4 < m_V < 8$, by monitoring the full sky. MASCARA consists of one northern station on La Palma, Canary Islands (fully operational since February 2015), one southern station at La Silla Observatory, Chile (operational from early 2017), and a data centre at Leiden Observatory in the Netherlands. Both MASCARA stations are equipped with five interline CCD cameras using wide field lenses (24 mm focal length) with fixed pointings, which together provide coverage down to airmass 3 of the local sky. The interline CCD cameras allow for back-to-back exposures, taken at fixed sidereal times with exposure times of 6.4 sidereal seconds. The exposures are short enough that the motion of stars across the CCD does not exceed one pixel during an integration. Astrometry and photometry are performed on-site, after which the resulting light curves are transferred to Leiden for further analysis. The final MASCARA archive will contain light curves for ${sim}70,000$ stars down to $m_V=8.4$, with a precision of $1.5%$ per 5 minutes at $m_V=8$.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
