Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userRecovery of Bennus Orientation for the OSIRIS-REx Mission: Implications for the Spin State Accuracy and Geolocation Errors
101
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The goal of the OSIRIS-REx mission is to return a sample of asteroid material from Near-Earth Asteroid (101955) Bennu. The role of the navigation and flight dynamics team is critical for the spacecraft to execute a precisely planned sampling maneuver over a specifically-selected landing site. In particular, the orientation of Bennu needs to be recovered with good accuracy during orbital operations to contribute as small an error as possible to the landing error budget. Although Bennu is well characterized from Earth-based radar observations, its orientation dynamics are not sufficiently known to exclude the presence of a small wobble. To better understand this contingency and evaluate how well the orientation can be recovered in the presence of a large 1$^{circ}$ wobble, we conduct a comprehensive simulation with the NASA GSFC GEODYN orbit determination and geodetic parameter estimation software. We describe the dynamic orientation modeling implemented in GEODYN in support of OSIRIS-REx operations, and show how both altimetry and imagery data can be used as either undifferenced (landmark, direct altimetry) or differenced (image crossover, altimetry crossover) measurements. We find that these two different types of data contribute differently to the recovery of instrument pointing or planetary orientation. When upweighted, the absolute measurements help reduce the geolocation errors, despite poorer astrometric (inertial) performance. We find that with no wobble present, all the geolocation requirements are met. While the presence of a large wobble is detrimental, the recovery is still reliable thanks to the combined use of altimetry and imagery data.
rate research
Read More
The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work, we apply an unsupervised machine learning classification through the K-Means algorithm to spectrophotometrically characterize the surface of Bennu, and in particular Nightingale and Osprey. We first analyze a global mosaic of Bennu, from which we find four clusters scattered across the surface, reduced to three when we normalize the images at 550 nm. The three spectral clusters are associated with boulders and show significant differences in spectral slope and UV value. We do not see evidence of latitudinal non-uniformity, which suggests that Bennus surface is well-mixed. In our higher-resolution analysis of the primary and backup sample sites, we find three representative normalized clusters, confirming an inverse correlation between reflectance and spectral slope (the darkest areas being the reddest ones) and between b normalized reflectance and slope. Nightingale and Osprey are redder than the global surface of Bennu by more than $1sigma$ from average, consistent with previous findings, with Nightingale being the reddest ($S = (- 0.3 pm 1.0) times 10^{- 3}$ percent per thousand angstroms). We see hints of a weak absorption band at 550 nm at the candidate sample sites and globally, which lends support to the proposed presence of magnetite on Bennu.
The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASAs New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can readily be ingested by the spacecrafts sampling mechanism. To inform this mission-critical decision, the surface of Bennu is mapped using the OSIRIS-REx Camera Suite and the images are used to develop several foundational data products. Acquiring the necessary inputs to these data products requires observational strategies that are defined specifically to overcome the challenges associated with mapping a small irregular body. We present these strategies in the context of assessing candidate sample-sites at Bennu according to a framework of decisions regarding the relative safety, sampleability, and scientific value across the asteroids surface. To create data products that aid these assessments, we describe the best practices developed by the OSIRIS-REx team for image-based mapping of irregular small bodies. We emphasize the importance of using 3D shape models and the ability to work in body-fixed rectangular coordinates when dealing with planetary surfaces that cannot be uniquely addressed by body-fixed latitude and longitude.
The target asteroid of the OSIRIS-REx asteroid sample return mission, (101955) Bennu (formerly 1999 RQ$_{36}$), is a half-kilometer near-Earth asteroid with an extraordinarily well constrained orbit. An extensive data set of optical astrometry from 1999--2013 and high-quality radar delay measurements to Bennu in 1999, 2005, and 2011 reveal the action of the Yarkovsky effect, with a mean semimajor axis drift rate $da/dt = (-19.0 pm 0.1)times 10^{-4}$ au/Myr or $284pm 1.5;rm{m/yr}$. The accuracy of this result depends critically on the fidelity of the observational and dynamical model. As an example, neglecting the relativistic perturbations of the Earth during close approaches affects the orbit with $3sigma$ significance in $da/dt$. The orbital deviations from purely gravitational dynamics allow us to deduce the acceleration of the Yarkovsky effect, while the known physical characterization of Bennu allows us to independently model the force due to thermal emissions. The combination of these two analyses yields a bulk density of $rho = 1260pm70,rm{kg/m^3}$, which indicates a macroporosity in the range $40pm10$% for the bulk densities of likely analog meteorites, suggesting a rubble-pile internal structure. The associated mass estimate is $(7.8pm0.9)times 10^{10}, rm{kg}$ and $GM = 5.2pm0.6,rm{m^3/s^2}$. Bennus Earth close approaches are deterministic over the interval 1654--2135, beyond which the predictions are statistical in nature. In particular, the 2135 close approach is likely within the lunar distance and leads to strong scattering and therefore numerous potential impacts in subsequent years, from 2175--2196. The highest individual impact probability is $9.5times 10^{-5}$ in 2196, and the cumulative impact probability is $3.7times 10^{-4}$, leading to a cumulative Palermo Scale of -1.70.
The requirements-driven OSIRIS-REx Camera Suite (OCAMS) acquires images essential to collecting a sample from the surface of Bennu. During proximity operations, these images document the presence of satellites and plumes, record spin state, enable an accurate digital terrain model of the shape of the asteroid and identify any surface hazards. They confirm the presence of sampleable regolith on the surface, observe the sampling event itself, and image the sample head in order to verify its readiness to be stowed. They document the history of Bennu as an example of early solar system material, as a microgravity body with a planetesimal size-scale, and as a carbonaceous object. OCAMS is fitted with three cameras. The MapCam records point-source color images on approach to the asteroid in order to connect ground-based point-source observations of Bennu to later higher-resolution surface spectral imaging. The SamCam documents the sample site before, during, and after it is disturbed by the sample mechanism. The PolyCam, using its focus mechanism, observes the sample site at sub-centimeter resolutions, revealing surface texture and morphology. While their imaging requirements divide naturally between the three cameras, they preserve a strong degree of functional overlap. OCAMS and the other spacecraft instruments allow the OSIRIS-REx mission to collect a sample from a microgravity body on the same visit during which it was first optically acquired from long range, a useful capability as humanity explores near-Earth, Main-Belt and Jupiter Trojan asteroids.
In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on Jan. 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in August 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennus resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
