Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHigh-speed 100 MHz strain monitor using fiber Bragg grating and optical filter for magnetostriction measurements under ultrahigh magnetic fields
64
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A high-speed 100 MHz strain monitor using a fiber Bragg grating, an optical filter, and a mode-locked optical fiber laser has been devised, which has a resolution of $Delta L/Lsim10^{-4}$. The strain monitor is sufficiently fast and robust for the magnetostriction measurements of magnetic materials under ultrahigh magnetic fields generated with destructive pulse magnets, where the sweep rate is in the range of 10-100 T/$mu$s. As a working example, the magnetostriction of LaCoO$_{3}$ was measured at room temperature, 115 K, and 7$sim$4.2 K up to a maximum magnetic field of 150 T. The smooth $B^{2}$ dependence and the first-order transition were observed at 115 K and 7$sim$4.2 K, respectively, reflecting the field-induced spin-state evolution.
rate research
Read More
High-speed 100 MHz strain monitor using fiber Bragg grating (FBG) and an optical filter has been devised for the magnetostriction measurements under ultrahigh magnetic fields. The longitudinal magnetostriction of LaCoO$_{3}$ has been measured at room temperature, 115, 7 and 4.2 K up to the maximum magnetic field of 150 T. The field-induced lattice elongations are observed, which are attributed to the spin-state crossover from the low-spin ground state to excited spin-states.
High-resolution magnetostriction measurement of $Delta L/Lsim10^{-6}$ at a speed of 5 MHz is performed, using optical filter method as the detection scheme for the fiber Bragg grating (FBG) based strain monitor is performed under 35-millisecond pulsed high magnetic fields up to 45 T at 2.2 K. The resolution of magnetostriction is about the same order as the conventionally reported value from FBG based magnetostriction measurement systems for millisecond pulsed magnetic fields. The measurement speed is $sim$100 times the conventional ones. Present system can be a faster alternative for the conventional FBG based magnetostriction measurement system for millisecond pulsed high magnetic fields.
We here report magnetostriction measurements under pulsed megagauss fields using a high-speed 100 MHz strain monitoring system devised using fiber Bragg grating (FBG) technique with optical filter method. The optical filter method is a detection scheme of the strain of FBG, where the changing Bragg wavelength of the FBG reflection is converted to the intensity of reflected light to enable the 100 MHz measurement. In order to show the usefulness and reliability of the method, we report the measurements for solid oxygen, spin-controlled crystal, and volborthite, a deformed Kagom{e} quantum spin lattice, using static magnetic fields up to 7 T and non-destructive millisecond pulse magnets up to 50 T. Then, we show the application of the method for the magnetostriction measurements of CaV$_{4}$O$_{9}$, a two-dimensional antiferromagnet with spin-halves, and LaCoO$_{3}$, an anomalous spin-crossover oxide, in the megagauss fields.
We report on a new high resolution apparatus for measuring magnetostriction suitable for use at cryogenic temperatures in pulsed high magnetic fields which we have developed at the Hochfeld-Magnetlabor Dresden. Optical fibre strain gauges based on Fibre Bragg Gratings are used to measure the strain in small (~1mm) samples. We describe the implementation of a fast measurement system capable of resolving strains in the order of $10^{-7}$ with a full bandwidth of 47kHz, and demonstrate its use on single crystal samples of GdSb and GdSi.
We demonstrate an ultrahigh-speed optical coherence tomography (OCT) based on a 100 MHz swept source (SS). An all polarization-maintaining figure-9 mode-locked fiber laser is used as the seed laser. After nonlinear spectral expansion in an Erbium-doped fiber amplifier, a flat top spectrum with respectively 1-dB and 10-dB bandwidths of 73.7 nm and 106 nm is obtained. The broadband femtosecond pulse is time stretched to a swept signal in a section of dispersion compensation fiber with a total dispersion of -84 ps/nm. With the swept source, the axial resolution of the SS-OCT is measured to be 21 um with a 6 dB sensitivity roll-off length of 3 mm. A tomographic image of an encoding disk and a hard disk jointly rotating at 17,000 rpm was acquired by using the SS-OCT with a high imaging quality.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
