Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA high-performance Raman-Ramsey Cs vapor cell atomic clock
73
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We demonstrate a high-performance coherent-population-trapping (CPT) Cs vapor cell atomic clock using the push-pull optical pumping technique (PPOP) in the pulsed regime, allowing the detection of high-contrast and narrow Ramsey-CPT fringes. The impact of several experimental parameters onto the clock resonance and short-term fractional frequency stability, including the laser power, the cell temperature and the Ramsey sequence parameters, has been investigated. We observe and explain the existence of a slight dependence on laser power of the central Ramsey-CPT fringe line-width in the pulsed regime. We report also that the central fringe line-width is commonly narrower than the expected Ramsey line-width given by $1/(2T_R)$, with $T_R$ the free-evolution time, for short values of $T_R$. The clock demonstrates a short-term fractional frequency stability at the level of $2.3 times 10^{-13}~tau^{-1/2}$ up to 100 seconds averaging time, mainly limited by the laser AM noise. Comparable performances are obtained in the conventional continuous (CW) regime, if use of an additional laser power stabilization setup. The pulsed interaction allows to reduce significantly the clock frequency sensitivity to laser power variations, especially for high values of $T_R$. This pulsed CPT clock, ranking among the best microwave vapor cell atomic frequency standards, could find applications in telecommunication, instrumentation, defense or satellite-based navigation systems.
rate research
Read More
We report the detection of high-contrast and narrow Coherent Population Trapping (CPT) Ramsey fringes in a Cs vapor cell using a simple-architecture laser system. The latter allows the combination of push-pull optical pumping (PPOP) and a temporal Ramsey-like pulsed interrogation. An originality of the optics package is the use of a single Mach-Zehnder electro-optic modulator (MZ EOM) both for optical sidebands generation and light switch for pulsed interaction. Typical Ramsey fringes with a linewidth of 166 Hz and a contrast of 33 % are detected in a cm-scale buffer-gas filled Cs vapor cell. This technique could be interesting for the development of high-performance and low power consumption compact vapor cell clocks based on CPT.
We report the operation of a dual Rb/Cs atomic fountain clock. 133Cs and 87Rb atoms are cooled, launched, and detected simultaneously in LNE-SYRTEs FO2 double fountain. The dual clock operation occurs with no degradation of either the stability or the accuracy. We describe the key features for achieving such a simultaneous operation. We also report on the results of the first Rb/Cs frequency measurement campaign performed with FO2 in this dual atom clock configuration, including a new determination of the absolute 87Rb hyperfine frequency.
The design and performance of a compact heated vapor cell unit for realizing a dichroic atomic vapor laser lock (DAVLL) for the D2 transitions in atomic rubidium is described. A 5 cm-long vapor cell is placed in a double-solenoid arrangement to produce the required magnetic field; the heat from the solenoid is used to increase the vapor pressure and correspondingly the DAVLL signal. We have characterized experimentally the dependence of important features of the DAVLL signal on magnetic field and cell temperature. For the weaker transitions both the amplitude and gradient of the signal are increased by an order of magnitude.
The passage of time is tracked by counting oscillations of a frequency reference, such as Earths revolutions or swings of a pendulum. By referencing atomic transitions, frequency (and thus time) can be measured more precisely than any other physical quantity, with the current generation of optical atomic clocks reporting fractional performance below the $10^{-17}$ level. However, the theory of relativity prescribes that the passage of time is not absolute, but impacted by an observers reference frame. Consequently, clock measurements exhibit sensitivity to relative velocity, acceleration and gravity potential. Here we demonstrate optical clock measurements surpassing the present-day ability to account for the gravitational distortion of space-time across the surface of Earth. In two independent ytterbium optical lattice clocks, we demonstrate unprecedented levels in three fundamental benchmarks of clock performance. In units of the clock frequency, we report systematic uncertainty of $1.4 times 10^{-18}$, measurement instability of $3.2 times 10^{-19}$ and reproducibility characterised by ten blinded frequency comparisons, yielding a frequency difference of $[-7 pm (5)_{stat} pm (8)_{sys}] times 10^{-19}$. While differential sensitivity to gravity could degrade the performance of these optical clocks as terrestrial standards of time, this same sensitivity can be used as an exquisite probe of geopotential. Near the surface of Earth, clock comparisons at the $1 times 10^{-18}$ level provide 1 cm resolution along gravity, outperforming state-of-the-art geodetic techniques. These optical clocks can further be used to explore geophysical phenomena, detect gravitational waves, test general relativity and search for dark matter.
We experimentally investigated the characteristics of two-photon transmission resonances in Rb vapor cells with different amount of buffer gas under the conditions of steady-state coherent population trapping (CPT) and pulsed Raman-Ramsey (RR-) CPT interrogation scheme. We particularly focused on the influence of the Rb atoms diffusing in and out of the laser beam. We showed that this effect modifies the shape of both CPT and Raman-Ramsey resonances, as well as their projected performance for CPT clock applications. In particular we found that at moderate buffer gas pressures RR-CPT did not improved the projected atomic clock stability compare to the regular steady-state CPT resonance.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
