No Arabic abstract
Satellite-based quantum terminals are a feasible way to extend the reach of quantum communication protocols such as quantum key distribution (QKD) to the global scale. To that end, prior demonstrations have shown QKD transmissions from airborne platforms to receivers on ground, but none have shown QKD transmissions from ground to a moving aircraft, the latter scenario having simplicity and flexibility advantages for a hypothetical satellite. Here, we demonstrate QKD from a ground transmitter to a receiver prototype mounted on an airplane in flight. We have specifically designed our receiver prototype to consist of many components that are compatible with the environment and resource constraints of a satellite. Coupled with our relocatable ground station system, optical links with distances of 3-10 km were maintained and quantum signals transmitted while traversing angular rates similar to those observed of low-Earth-orbit satellites. For some passes of the aircraft over the ground station, links were established within 10 s of position data transmission, and with link times of a few minutes and received quantum bit error rates typically 3-5%, we generated secure keys up to 868 kb in length. By successfully generating secure keys over several different pass configurations, we demonstrate the viability of technology that constitutes a quantum receiver satellite payload and provide a blueprint for future satellite missions to build upon.
Airborne quantum key distribution (QKD) is now becoming a flexible bond between terrestrial fiber and satellite, which is an efficient solution to establish a mobile, on-demand, and real-time coverage quantum network. Furthermore, When the aircraft is flying at a high speed, usually larger than 0.3 Ma, the produced boundary layer will impair the performance of aircraft-based QKD. The boundary layer would introduce random wavefront aberration, jitter and extra intensity attenuation to the transmitted photons. However, previous airborne QKD implementations only considered the influences from atmospheric turbulence and molecular scattering, but ignored the boundary layer effects. In this article, we propose a detailed performance evaluation scheme of airborne QKD with boundary layer effects and estimate the overall photon transmission efficiency, quantum bit error rate and final secure key rate. Through simulations and modeling, in our proposed airborne QKD scenario, the boundary layer would introduce 3.5dB loss to the transmitted photons and decrease 70.7% of the secure key rate, which shows that the aero-optical effects caused by the boundary layer can not be ignored. With tolerated quantum bit error rate set to 10%, the suggested quantum communication azimuth angle between the aircraft and the ground station is within 60 degrees. Moreover, the optimal beacon laser module and adaptive optics module are suggested to be employed to improve the performance of airborne QKD system. Our detailed airborne QKD evaluation study can be performed to the future airborne quantum communication designs.
Technological realities limit terrestrial quantum key distribution (QKD) to single-link distances of a few hundred kilometers. One promising avenue for global-scale quantum communication networks is to use low-Earth-orbit satellites. Here we report the first demonstration of QKD from a stationary transmitter to a receiver platform traveling at an angular speed equivalent to a 600 km altitude satellite, located on a moving truck. We overcome the challenges of actively correcting beam pointing, photon polarization and time-of-flight. Our system generates an asymptotic secure key at 40 bits/s.
Time coding quantum key distribution with coherent faint pulses is experimentally demonstrated. A measured 3.3 % quantum bit error rate and a relative contrast loss of 8.4 % allow a 0.49 bit/pulse advantage to Bob.
Integrated photonics has the advantages of miniaturization, low cost, and CMOS compatibility, and it provides a stable, highly integrated, and practical platform for quantum key distribution (QKD). While photonic integration of optical components has greatly reduced the overall cost of QKD systems, single-photon detectors (SPDs) have become the most expensive part of a practical QKD system. In order to circumvent this obstacle and make full use of SPDs, we have designed and fabricated a QKD receiver chip for multiple users. Our chip is based on a time-division multiplexing technique and makes use of a single set of SPDs to support up to four users QKD. Our proof-of-principle chip-based QKD system is capable of producing an average secret key rate of 13.68 kbps for four users with a quantum bit error rate (QBER) as low as 0.51% over a simulated distance of 20 km in fiber. Our result clearly demonstrates the feasibility of multiplexing SPDs for setting QKD channels with different users using photonic integrated chip and may find applications in the commercialization of quantum communication technology.
Quantum key distribution (QKD) is moving from research laboratories towards applications. As computing becomes more mobile, cashless as well as cardless payment solutions are introduced, and a need arises for incorporating QKD in a mobile device. Handheld devices present a particular challenge as the orientation and the phase of a qubit will depend on device motion. This problem is addressed by the reference frame independent (RFI) QKD scheme. The scheme tolerates an unknown phase between logical states that varies slowly compared to the rate of particle repetition. Here we experimentally demonstrate the feasibility of RFI QKD over a free-space link in a prepare and measure scheme using polarisation encoding. We extend the security analysis of the RFI QKD scheme to be able to deal with uncalibrated devices and a finite number of measurements. Together these advances are an important step towards mass production of handheld QKD devices.