Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAnatomy of the internal bow shocks in the IRAS 04166+2706 protostellar jet
93
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
$Aims.$ We study the relation between the jet and the outflow in the IRAS 04166+2706 protostar. This Taurus protostar drives a molecular jet that contains multiple emission peaks symmetrically located from the central source. The protostar also drives a wide-angle outflow consisting of two conical shells. $Methods.$ We have used the Atacama Large Millimeter/submillimeter Array (ALMA) interferometer to observe two fields along the IRAS 04166+2706 jet. The fields were centered on a pair of emission peaks that correspond to the same ejection event, and were observed in CO(2-1), SiO(5-4), and SO(65-54). $ Results.$ Both ALMA fields present spatial distributions that are approximately elliptical and have their minor axes aligned with the jet direction. As the velocity increases, the emission in each field moves gradually across the elliptical region. This systematic pattern indicates that the emitting gas in each field lies in a disk-like structure that is perpendicular to the jet axis and is expanding away from the jet. A small degree of curvature in the first-moment maps indicates that the disks are slightly curved in the manner expected for bow shocks moving away from the IRAS source. A simple geometrical model confirms that this scenario fits the main emission features. $Conclusions.$ The emission peaks in the IRAS 04166+2706 jet likely represent internal bow shocks where material is being ejected laterally away from the jet axis. While the linear momentum of the ejected gas is dominated by the component in the jet direction, the sideways component is not negligible, and can potentially affect the distribution of gas in the surrounding outflow and core.
rate research
Read More
The high-velocity molecular jet driven by Class 0 protostar IRAS 04166+2706 exhibits a unique saw-tooth velocity pattern. It consists of a series of well-aligned symmetric knots with similar averaged speeds, whose speeds at peaks of emission decreases roughly linearly away from the origin. Recent ALMA observations of knots R6 and B6 reveal kinematic behavior with expansion velocity increasing linearly from the axis to the edge. This pattern can be formed by a spherically expanding wind with axial density concentration. In this picture, the diverging velocity profile naturally possesses an increasing expansion velocity away from the axis, resulting in a tooth-like feature on the position-velocity diagram through projection. Such geometric picture predicts a correspondence between the slopes of the teeth and the outflow inclination angles, and the same inclination angle of 52$^circ$ of the IRAS 04166+2706 can generally explain the whole pattern. Aided by numerical simulations in the framework of unified wind model by Shang et al. (2006), the observed velocity pattern can indeed be generated. A proper geometrical distribution of the jet and wind material is essential to the reconstruction the ejection history of the system.
Context: IRAS 04166+2706 in Taurus is one of the most nearby young stellar objects whose molecular outflow contains a highly collimated fast component. Methods: We have observed the IRAS 04166+2706 outflow with the IRAM Plateau de Bure interferometer in CO(J=2-1) and SiO(J=2-1) achieving angular resolutions between 2 and 4. To improve the quality of the CO(2-1) images, we have added single dish data to the interferometer visibilities. Results: The outflow consists of two distinct components. At velocities <10 km/s, the gas forms two opposed, approximately conical shells that have the YSO at their vertex. These shells coincide with the walls of evacuated cavities and seem to result from the acceleration of the ambient gas by a wide-angle wind. At velocities >30 km/s, the gas forms two opposed jets that travel along the center of the cavities and whose emission is dominated by a symmetric collection of at least 7 pairs of peaks. The velocity field of this component presents a sawtooth pattern with the gas in the tail of each peak moving faster than the gas in the head. This pattern, together with a systematic widening of the peaks with distance to the central source, is consistent with the emission arising from internal working surfaces traveling along the jet and resulting from variations in the velocity field of ejection. We interpret this component as the true protostellar wind, and we find its composition consistent with a chemical model of such type of wind. Conclusions: Our results support outflow wind models that have simultaneously wide-angle and narrow components, and suggest that the EHV peaks seen in a number of outflows consist of internally-shocked wind material.
Expanding nebulae are produced by mass loss from stars, especially during late stages of evolution. Multi-dimensional simulation of these nebulae requires high resolution near the star and permits resolution that decreases with distance from the star, ideally with adaptive timesteps. We report the implementation and testing of static mesh-refinement in the radiation-magnetohydrodynamics code PION, and document its performance for 2D and 3D calculations. The bow shock produced by a hot, magnetized, slowly rotating star as it moves through the magnetized ISM is simulated in 3D, highlighting differences compared with 2D calculations. Latitude-dependent, time-varying magnetized winds are modelled and compared with simulations of ring nebulae around blue supergiants from the literature. A 3D simulation of the expansion of a fast wind from a Wolf-Rayet star into the slow wind from a previous red supergiant phase of evolution is presented, with results compared with results in the literature and analytic theory. Finally the wind-wind collision from a binary star system is modelled with 3D MHD, and the results compared with previous 2D hydrodynamic calculations. A python library is provided for reading and plotting simulation snapshots, and the generation of synthetic infrared emission maps using torus is also demonstrated. It is shown that state-of-the-art 3D MHD simulations of wind-driven nebulae can be performed using PION with reasonable computational resources. The source code and user documentation is made available for the community under a BSD3 licence.
Stellar bow shocks are observed in a variety of interstellar environments and are shaped by the conditions of gas in the interstellar medium (ISM). In situ measurements of turbulent density fluctuations near stellar bow shocks are only achievable with a few observational probes, including H$alpha$ emitting bow shocks and the Voyager Interstellar Mission (VIM). In this paper, we examine density variations around the Guitar Nebula, an H$alpha$ bow shock associated with PSR B2224$+$65, in tandem with density variations probed by VIM near the boundary of the solar wind and ISM. High-resolution Hubble Space Telescope observations of the Guitar Nebula taken between 1994 and 2006 trace density variations over scales from 100s to 1000s of au, while VIM density measurements made with the Voyager 1 Plasma Wave System constrain variations from 1000s of meters to 10s of au. The power spectrum of density fluctuations constrains the amplitude of the turbulence wavenumber spectrum near the Guitar Nebula to ${rm log}_{10}C_{rm n}^2 = -0.8pm0.2$ m$^{-20/3}$ and for the very local ISM probed by Voyager ${rm log}_{10}C_{rm n}^2 = -1.57pm0.02$ m$^{-20/3}$. Spectral amplitudes obtained from multi-epoch observations of four other H$alpha$ bow shocks also show significant enhancements in $C_{rm n}^2$ from values that are considered typical for the diffuse, warm ionized medium, suggesting that density fluctuations near these bow shocks may be amplified by shock interactions with the surrounding medium, or by selection effects that favor H$alpha$ emission from bow shocks embedded in denser media.
Citizen science has helped astronomers comb through large data sets to identify patterns and objects that are not easily found through automated processes. The Milky Way Project (MWP), a citizen science initiative on the Zooniverse platform, presents internet users with infrared (IR) images from Spitzer Space Telescope Galactic plane surveys. MWP volunteers make classification drawings on the images to identify targeted classes of astronomical objects. We present the MWP second data release (DR2) and an updated data reduction pipeline written in Python. We aggregate ${sim}3$ million classifications made by MWP volunteers during the years 2012-2017 to produce the DR2 catalogue, which contains 2600 IR bubbles and 599 candidate bow-shock driving stars. The reliability of bubble identifications, as assessed by comparison to visual identifications by trained experts and scoring by a machine-learning algorithm, is found to be a significant improvement over DR1. We assess the reliability of IR bow shocks via comparison to expert identifications and the colours of candidate bow-shock driving stars in the 2MASS point-source catalogue. We hence identify highly-reliable subsets of 1394 DR2 bubbles and 453 bow-shock driving stars. Uncertainties on object coordinates and bubble size/shape parameters are included in the DR2 catalog. Compared with DR1, the DR2 bubbles catalogue provides more accurate shapes and sizes. The DR2 catalogue identifies 311 new bow shock driving star candidates, including three associated with the giant HII regions NGC 3603 and RCW 49.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
