Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMultiuser Rate-Diverse Network-Coded Multiple Access
95
0
0.0
(
0
)
Added by
Lu Lu
Publication date
2016
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
This paper presents the first Network-Coded Multiple Access (NCMA) system with multiple users adopting different signal modulations, referred to as rate-diverse NCMA. A distinguishing feature of NCMA is the joint use of physical-layer network coding (PNC) and multiuser decoding (MUD) to boost throughput of multipacket reception systems. In previous NCMA systems, users adopt the same modulation regardless of their individual channel conditions. This leads to suboptimal throughput for many practical scenarios, especially when different users have widely varying channel conditions. A rate-diverse NCMA system allows different users to use modulations that are commensurate with their channel conditions. A key challenge is the design of the PNC mapping and decoding mechanisms in NCMA when different users adopt different modulations. While there have been past work on non-channel-coded rate-diverse PNC, this paper is the first attempt to design channel-coded rate-diverse PNC to ensure the reliability of the overall NCMA system. Specifically, we put forth a symbol-splitting channel coding and modulation design so that PNC/NCMA can work over different modulations. We implemented our rate-diverse NCMA system on software-defined radios. Experimental results show that the throughput of rate-diverse NCMA can outperform the state-of-the-art rate-homogeneous NCMA by 80%. Overall, the introduction of rate diversity significantly boosts the NCMA system throughput in practical scenarios.
rate research
Read More
This paper proposes and experimentally demonstrates a first wireless local area network (WLAN) system that jointly exploits physical-layer network coding (PNC) and multiuser decoding (MUD) to boost system throughput. We refer to this multiple access mode as Network-Coded Multiple Access (NCMA). Prior studies on PNC mostly focused on relay networks. NCMA is the first realized multiple access scheme that establishes the usefulness of PNC in a non-relay setting. NCMA allows multiple nodes to transmit simultaneously to the access point (AP) to boost throughput. In the non-relay setting, when two nodes A and B transmit to the AP simultaneously, the AP aims to obtain both packet A and packet B rather than their network-coded packet. An interesting question is whether network coding, specifically PNC which extracts packet (A XOR B), can still be useful in such a setting. We provide an affirmative answer to this question with a novel two-layer decoding approach amenable to real-time implementation. Our USRP prototype indicates that NCMA can boost throughput by 100% in the medium-high SNR regime (>=10dB). We believe further throughput enhancement is possible by allowing more than two users to transmit together.
In this work, we develop a pair of rate-diverse encoder and decoder for a two-user Gaussian multiple access channel (GMAC). The proposed scheme enables the users to transmit with the same codeword length but different coding rates under diverse user channel conditions. First, we propose the row-combining (RC) method and row-extending (RE) method to design practical low-density parity-check (LDPC) channel codes for rate-diverse GMAC. Second, we develop an iterative rate-diverse joint user messages decoding (RDJD) algorithm for GMAC, where all user messages are decoded with a single parity-check matrix. In contrast to the conventional network-coded multiple access (NCMA) and compute-forward multiple access (CFMA) schemes that first recover a linear combination of the transmitted codewords and then decode both user messages, this work can decode both the user messages simultaneously. Extrinsic information transfer (EXIT) chart analysis and simulation results indicate that RDJD can achieve gains up to 1.0 dB over NCMA and CFMA in the two-user GMAC. In particular, we show that there exists an optimal rate allocation for the two users to achieve the best decoding performance given the channel conditions and sum rate.
Rate-Splitting Multiple Access (RSMA) has recently appeared as a powerful and robust multiple access and interference management strategy for downlink Multi-user (MU) multi-antenna communications. In this work, we study the precoder design problem for RSMA scheme in downlink MU systems with both perfect and imperfect Channel State Information at the Transmitter (CSIT) and assess the role and benefits of transmitting multiple common streams. Unlike existing works which have considered single-antenna receivers (Multiple-Input Single-Output--MISO), we propose and extend the RSMA framework for multi-antenna receivers (Multiple-Input Multiple-Output--MIMO) and formulate the precoder optimization problem with the aim of maximizing the Weighted Ergodic Sum-Rate (WESR). Precoder optimization is solved using Sample Average Approximation (SAA) together with the proposed vectorization and Weighted Minimum Mean Square Error (WMMSE) based approach. Achievable sum-Degree of Freedom (DoF) of RSMA is derived for the proposed framework as an increasing function of the number of transmitted common and private streams, which is further validated by the Ergodic Sum Rate (ESR) performance using Monte Carlo simulations. Conventional MU-MIMO based on linear precoders and Non-Orthogonal Multiple Access (NOMA) schemes are considered as baselines. Numerical results show that with imperfect CSIT, the sum-DoF and ESR performance of RSMA is superior than that of the two baselines, and is increasing with the number of transmitted common streams. Moreover, by better managing the interference, RSMA not only has significant ESR gains over baseline schemes but is more robust to CSIT inaccuracies, network loads and user deployments.
This paper presents the first network-coded multiple access (NCMA) system prototype operated on high-order modulations up to 16-QAM. NCMA jointly exploits physical-layer network coding (PNC) and multiuser decoding (MUD) to boost throughput of multipacket reception systems. Direct generalization of the existing NCMA decoding algorithm, originally designed for BPSK, to high-order modulations, will lead to huge performance degradation. The throughput degradation is caused by the relative phase offset between received signals from different nodes. To circumvent the phase offset problem, this paper investigates an NCMA system with multiple receive antennas at the access point (AP), referred to as MIMO-NCMA. We put forth a low-complexity symbol-level NCMA decoder that, together with MIMO, can substantially alleviate the performance degradation induced by relative phase offset. To demonstrate the feasibility and advantage of MIMO-NCMA for high-order modulations, we implemented our designs on software-defined radio. Our experimental results show that the throughput of QPSK MIMO-NCMA is double that of both BPSK NCMA and QPSK MUD at SNR=10dB. For higher SNRs at which 16-QAM can be supported, the throughput of MIMO-NCMA can be as high as 3.5 times that of BPSK NCMA. Overall, this paper provides an implementable framework for high-order modulated NCMA.
This paper investigates practical 5G strategies for power-balanced non-orthogonal multiple access (NOMA). By allowing multiple users to share the same time and frequency, NOMA can scale up the number of served users and increase spectral efficiency compared with existing orthogonal multiple access (OMA). Conventional NOMA schemes with successive interference cancellation (SIC) do not work well when users with comparable received powers transmit together. To allow power-balanced NOMA (more exactly, near power-balanced NOMA), this paper investigates a new NOMA architecture, named Network-Coded Multiple Access (NCMA). A distinguishing feature of NCMA is the joint use of physical-layer network coding (PNC) and multiuser decoding (MUD) to boost NOMA throughputs. We first show that a simple NCMA architecture in which all users use the same modulation, referred to as rate-homogeneous NCMA, can achieve substantial throughput improvement over SIC-based NOMA under near power-balanced scenarios. Then, we put forth a new NCMA architecture, referred to as rate-diverse NCMA, in which different users may adopt different modulations commensurate with their relative SNRs. A challenge for rate-diverse NCMA is the design of a channel-coded PNC system. This paper is the first attempt to design channel-coded rate-diverse PNC. Experimental results on our software-defined radio prototype show that the throughput of rate-diverse NCMA can outperform the state-of-the-art rate-homogeneous NCMA by 80%. Overall, rate-diverse NCMA is a practical solution for near power-balanced NOMA.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
