Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEffect of lithographically-induced strain relaxation on the magnetic domain configuration in microfabricated epitaxially grown Fe81Ga19
122
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We investigate the role of lithographically-induced strain relaxation in a micron-scaled device fabricated from epitaxial thin films of the magnetostrictive alloy Fe81Ga19. The strain relaxation due to lithographic patterning induces a magnetic anisotropy that competes with the magnetocrystalline and shape induced anisotropies to play a crucial role in stabilising a flux-closing domain pattern. We use magnetic imaging, micromagnetic calculations and linear elastic modelling to investigate a region close to the edges of an etched structure. This highly-strained edge region has a significant influence on the magnetic domain configuration due to an induced magnetic anisotropy resulting from the inverse magnetostriction effect. We investigate the competition between the strain-induced and shape-induced anisotropy energies, and the resultant stable domain configurations, as the width of the bar is reduced to the nanoscale range. Understanding this behaviour will be important when designing hybrid magneto-electric spintronic devices based on highly magnetostrictive materials.
rate research
Read More
We present the fabrication and exploration of arrays of nanodots of $SrRuO_3$ with dot sizes between 500 nm and 15 nm. Down to the smallest dot size explored, the samples were found to be magnetic with a maximum of the Curie temperature $T_C$ achieved by dots of 30 nm diameter. This peak in $T_C$ is associated with a dot-size-induced relief of the epitaxial strain, as evidenced by scanning transmission electron microscopy.
The theory of epitaxial strain energy is extended beyond the harmonic approximation to account for large film/substrate lattice mismatch. We find that for fcc noble metals (i) directions <001> and <111> soften under tensile biaxial strain (unlike zincblende semiconductors) while (ii) <110> and <201> soften under compressive biaxial strain. Consequently, (iii) upon sufficient compression <201> becomes the softest direction (lowest elastic energy), but (iv) <110> is the hardest direction for large tensile strain. (v) The dramatic softening of <001> in fcc noble metals upon biaxial tensile strain is caused by small fcc/bcc energy differences for these materials. These results can be used in selecting the substrate orientation for effective epitaxial growth of pure elements and A/sub p/B/sub q/ superlattices, as well as to explain the shapes of coherent precipitates in phase separating alloys.
We obtain control of magnetic anisotropy in epitaxial (Ga,Mn)As by anisotropic strain relaxation in patterned structures. The strain in the structures is characterized using sophisticated X-ray techniques. The magnetic anisotropy before patterning of the layer, which shows biaxial easy axes along [100] and [010], is replaced by a hard axis in the direction of large elastic strain relaxation and a uniaxial easy axis in the direction where pseudomorphic conditions are retained. This strong anisotropy can not be explained by shape anisotropy and is attributed solely to lattice strain relaxation. Upon increasing the uniaxial strain anisotropy in the (Ga,Mn)As stripes, we also observe an increase in magnetic anisotropy.
It was predicted by Wigner in 1934 that the electron gas will undergo a transition to a crystallized state when its density is very low. Whereas significant progress has been made towards the detection of electronic Wigner states, their clear and direct experimental verification still remains a challenge. Here we address signatures of Wigner molecule formation in the transport properties of InSb nanowire quantum dot systems, where a few electrons may form localized states depending on the size of the dot (i.e. the electron density). By a configuration interaction approach combined with an appropriate transport formalism, we are able to predict the transport properties of these systems, in excellent agreement with experimental data. We identify specific signatures of Wigner state formation, such as the strong suppression of the antiferromagnetic coupling, and are able to detect the onset of Wigner localization, both experimentally and theoretically, by studying different dot sizes.
We report on a low-temperature transport study of a single-gate, planar field-effect device made from a free-standing, wurtzite-crystalline InAs nanosheet. The nanosheet is grown via molecular beam epitaxy and the field-effect device is characterized by gate transfer characteristic measurements and by magnetic field orientation dependent transport measurements. The measurements show that the device exhibits excellent electrical properties and the electron transport in the nanosheet is of the two-dimensional nature. Low-field magnetoconductance measurements are performed for the device at different gate voltages and temperatures, and the characteristic transport lengths, such as phase coherent length, spin-orbit length and mean free path, in the nanosheet are extracted. It is found that the spin-orbit length in the nanosheet is short, on the order of 150 nm, demonstrating the presence of strong spin-orbit interaction in the InAs nanosheet. Our results show that epitaxially grown, free-standing, InAs nanosheets can serve as an emerging semiconductor nanostructure platform for applications in spintronics, spin qubits and planar topological quantum devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
