No Arabic abstract
This paper proposes a virtual harvest-transmit model and a harvest-transmit-store model for amplify-and-forward full-duplex relay (FDR) networks with power splitting-based simultaneous wireless information and power transfer. The relay node employs a battery group consisting of two rechargeable batteries. By switching periodically between two batteries for charging and discharging in two consecutive time slots of each transmission block, all the harvested energy in each block has been applied for full duplex transmission in the virtual harvest-transmit model. By employing energy scheduling, the relay node switches among the harvesting, relaying, harvesting-relaying, and idle behaviors at a block level, so that a part of the harvested energy in a block can be scheduled for future usage in the harvest-transmit-store model. A greedy switching policy is designed to implement the harvest-transmit-store model, where the FDR node transmits when its residual energy ensures decoding at the destination. Numerical results verify the outage performance of the proposed schemes.
This paper investigates power splitting for full-duplex relay networks with wireless information and energy transfer. By applying power splitting as a relay transceiver architecture, the full duplex information relaying can be powered by energy harvested from the source-emitted radio frequency signal. In order to minimize outage probability, power splitting ratios have been dynamically optimized according to full channel state information (CSI) and partial CSI, respectively. Under strong loop interference, the proposed full CSI-based and partial CSI-based power splitting schemes achieve the better outage performance than the fixed power splitting scheme, whereas the partial CSI-based power splitting scheme can ensure competitive outage performance without requiring CSI of the second-hop link. It is also observed that the worst outage performance is achieved when the relay is located midway between the source and destination, whereas the outage performance of partial CSI-based power splitting scheme approaches that of full CSI-based scheme when the relay is placed close to the destination.
In this paper, we propose an optimal relay power allocation of an Amplify-and-Forward relay networks with non-linear power amplifiers. Based on Bussgang Linearization Theory, we depict the non-linear amplifying process into a linear system, which lets analyzing system performance easier. To obtain spatial diversity, we design a complete practical framework of a non-linear distortion aware receiver. Consider a total relay power constraint, we propose an optimal power allocation scheme to maximum the receiver signal-to-noise ratio. Simulation results show that proposed optimal relay power allocation indeed can improve the system capacity and resist the non-linear distortion. It is also verified that the proposed transmission scheme outperforms other transmission schemes without considering non-linear distortion.
In this paper the benefits provided by multi-cell processing of signals transmitted by mobile terminals which are received via dedicated relay terminals (RTs) are assessed. Unlike previous works, each RT is assumed here to be capable of full-duplex operation and receives the transmission of adjacent relay terminals. Focusing on intra-cell TDMA and non-fading channels, a simplified uplink cellular model introduced by Wyner is considered. This framework facilitates analytical derivation of the per-cell sum-rate of multi-cell and conventional single-cell receivers. In particular, the analysis is based on the observation that the signal received at the base stations can be interpreted as the outcome of a two-dimensional linear time invariant system. Numerical results are provided as well in order to provide further insight into the performance benefits of multi-cell processing with relaying.
A novel asymptotic closed-form probability density function (pdf) of the two-hop (TH) link is derived for a simultaneous wireless information and power transfer based differential amplify-and-forward system. Based on the pdf, asymptotic closed-form average bit-error rate expressions of the single TH link and the TH link with direct link combined with a linear combining scheme are both derived. Monte Carlo simulations verify the analytical expressions.
We consider the opportunistic multiuser diversity in the multiuser two-way amplify-and-forward (AF) relay channel. The relay, equipped with multiple antennas and a simple zero-forcing beam-forming scheme, selects a set of two way relaying user pairs to enhance the degree of freedom (DoF) and consequently the sum throughput of the system. The proposed channel aligned pair scheduling (CAPS) algorithm reduces the inter-pair interference and keeps the signal to interference plus noise power ratio (SINR) of user pairs relatively interference free in average sense when the number of user pairs become very large. For ideal situations, where the number of user pairs grows faster than the system signal to noise ratio (SNR), the DoF of $M$ per channel use can be achieved when $M$ is the relay antenna size. With a limited number of pairs, the system is overloaded and the sum rates saturate at high signal to noise ratio (SNR) though modifications of CAPS can improve the performance to a certain amount. The performance of CAPS can be further enhanced by semi-orthogonal channel aligned pair scheduling (SCAPS) algorithm, which not only aligns the pair channels but also forms semi-orthogonal inter-pair channels. Simulation results show that we provide a set of approaches based on (S)CAPS and modified (S)CAPS, which provides system performance benefit depending on the SNR and the number of user pairs in the network.