Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userEnhancing Perovskite Electrocatalysis through Strain Tuning of the Oxygen Deficiency
61
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Oxygen vacancies in transition metal oxides facilitate catalysis critical for energy storage and generation. However, it has proven elusive to promote vacancies at the lower temperatures required for operation in devices such as metal-air batteries and portable fuel cells. Here, we use thin films of the perovskite-based strontium cobaltite (SrCoOx) to show that epitaxial strain is a powerful tool towards manipulating the oxygen content under conditions consistent with the oxygen evolution reaction, yielding increasingly oxygen deficient states in an environment where the cobaltite would normally be fully oxidized. The additional oxygen vacancies created through tensile strain enhance the cobaltite catalytic activity towards this important reaction by over an order of magnitude, equaling that of precious metal catalysts, including IrO2. Our findings demonstrate that strain in these oxides can dictate oxygen stoichiometry independent of ambient conditions, allowing unprecedented control over oxygen vacancies essential in catalysis near room temperature.
rate research
Read More
The effect of elastic strain on catalytic activity of platinum (Pt) towards oxygen reduction reaction (ORR) is investigated through de-alloyed Pt-Cu thin films; stress evolution in the de-alloyed layer and the mass of the Cu removed are measured in real-time during electrochemical de-alloying of (111)-textured thin-film PtCu (1:1, atom %) electrodes. In situ stress measurements are made using the cantilever-deflection method and nano-gravimetric measurements are made using an electrochemical quartz crystal nanobalance. Upon de-alloying via successive voltammetric sweeps between -0.05 and 1.15 V vs. standard hydrogen electrode, compressive stress develops in the de-alloyed Pt layer at the surface of thin-film PtCu electrodes. The de-alloyed films also exhibit enhanced catalytic activity towards ORR compared to polycrystalline Pt. In situ nanogravimetric measurements reveal that the mass of de-alloyed Cu is approximately 210 +/- 46 ng/cm2, which corresponds to a de-alloyed layer thickness of 1.2 +/- 0.3 monolayers or 0.16 +/- 0.04 nm. The average biaxial stress in the de-alloyed layer is estimated to be 4.95 +/- 1.3 GPa, which corresponds to an elastic strain of 1.47 +/- 0.4%. In addition, density functional theory calculations have been carried out on biaxially strained Pt (111) surface to characterize the effect of strain on its ORR activity; the predicted shift in the limiting potentials due to elastic strain is found to be in good agreement with the experimental shift in the cyclic voltammograms for the dealloyed PtCu thin film electrodes.
The interrelation between the epitaxial strain and oxygen deficiency in La0.7Ca0.3MnO3-{delta} thin films was studied in terms of structural and functional properties. The films with a thickness of 1000{AA} were prepared using a PLD system equipped with a RHEED facility and a pyrometric film temperature control. The epitaxial strain and the oxygen deficiency in the samples were systematically modified using three different substrates: SrTiO3, (LaAlO3)0.3-(Sr2AlTaO6)0.7 and LaSrAlO4, and four different oxygen pressures during film growth ranging from 0.27mbar to 0.1mbar. It could be demonstrated that the oxygen incorporation depends on the epitaxial strain: oxygen vacancies were induced to accommodate tensile strain whereas the compressive strain suppressed the generation of oxygen vacancies.
Artificially engineered superlattices were designed and fabricated to induce different growth mechanisms and structural characteristics. DC sputtering was used to grow ferromagnetic (La$_{0.8}$Ba$_{0.2}$MnO$_3$) / ferroelectric (Ba$_{0.25}$Sr$_{0.75}$TiO$_3$ or BaTiO$_3$) superlattices. We systematically modified the thickness of the ferromagnetic layer to analyze dimensional and structural effects on the superlattices with different structural characteristics. The crystalline structure was characterized by X-Ray diffraction and transmission electron microscopy. The magnetic and electronic properties were investigated by SQUID magnetometry and resistance measurements. The results show that both strain and structural disorder can significantly affect the physical properties of the systems. Compressive strain tends to increase the competition between the magnetic interactions decreasing the ferromagnetism of the samples and the localization of the charge carrier through the electron-phonon interaction. Tensile strain reduces the charge carrier localization, increasing the ferromagnetic transition temperature. Structural defects have a stronger influence on the magnetic properties than on the transport properties, reducing the ferromagnetic transition temperature while increasing the magnetic hardness of the superlattices. These results help to further understand the role of strain and interface effects in the magnetic and transport properties of manganite based multiferroic systems.
We use density functional theory to calculate the structure, band-gap and magnetic properties of oxygen-deficient SrTi$_{1-x-y}$Fe$_x$Co$_y$O$_{3-delta}$ with x = y = 0.125 and ${delta}$ = (0,0.125,0.25). The valence and the high or low spin-states of the Co and Fe ions, as well as the lattice distortion and the band-gap, depend on the oxygen deficiency, the locations of the vacancies, and on the direction of the Fe-Co axis. A charge redistribution that resembles a self-regulatory response lies behind the valence spin-state changes. Ferromagnetism dominates, and both the magnetization and the band gap are greatest at ${delta}$ = 0.125. This qualitatively mimics the previously reported magnetization measured for SrTiFeO$_{3-delta}$, which was maximum at an intermediate deposition pressure of oxygen.
We report on the effect of epitaxial strain on magnetic and optical properties of perovskite LaCrO3 (LCO) single crystal thin films. Epitaxial LCO thin films are grown by pulsed laser deposition on proper choice of substrates to impose different strain states. A combined experimental and theoretical approach is used to demonstrate the direct correlation between lattice-strain and functional properties. The magnetization results show that the lattice anisotropy plays a critical role in controlling the magnetic behavior of LCO films. The strain induced tetragonality in the film lattice strongly affects the optical transitions and charge transfer gap in LCO. This study opens new possibilities to tailoring the functional properties of LCO and related materials by strain engineering in epitaxial growth.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
