Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThin film growth of a topological crystal insulator SnTe on the CdTe (111) surface by molecular beam epitaxy
107
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report molecular beam epitaxial growth of a SnTe (111) layer on a CdTe template, fabricated by depositing it on a GaAs (111)A substrate, instead of BaF$_2$ which has been conventionally used as a substrate. By optimizing temperatures for the growth of both SnTe and CdTe layers, we could obtain SnTe layers of the single phase grown only in the (111) orientation and of much improved surface morphology from the viewpoint of the extension and the flatness of flat regions, compared to the layers grown on BaF$_2$. In this optimal growth condition, we have also achieved a low hole density of the order of 10$^{17}$cm$^{-3}$ at 4K, the lowest value ever reported for SnTe thin films without additional doping. In the magnetoresistance measurement on this optimized SnTe layer, we observe characteristic negative magneto-conductance which is attributed to the weak antilocalization effect of the two-dimensional transport in the topological surface state.
rate research
Read More
Materials informatics exploiting machine learning techniques, e.g., Bayesian optimization (BO), has the potential to offer high-throughput optimization of thin-film growth conditions through incremental updates of machine learning models in accordance with newly measured data. Here, we demonstrated BO-based molecular beam epitaxy (MBE) of SrRuO3, one of the most-intensively studied materials in the research field of oxide electronics, mainly owing to its unique nature as a ferromagnetic metal. To simplify the intricate search space of entangled growth conditions, we ran the BO for a single condition while keeping the other conditions fixed. As a result, high-crystalline-quality SrRuO3 film exhibiting a high residual resistivity ratio (RRR) of over 50 as well as strong perpendicular magnetic anisotropy was developed in only 24 MBE growth runs in which the Ru flux rate, growth temperature, and O3-nozzle-to-substrate distance were optimized. Our BO-based search method provides an efficient experimental design that is not as dependent on the experience and skills of individual researchers, and it reduces experimental time and cost, which will accelerate materials research.
The stoichiometric 111 iron-based superconductor, LiFeAs, has attacted great research interest in recent years. For the first time, we have successfully grown LiFeAs thin film by molecular beam epitaxy (MBE) on SrTiO3(001) substrate, and studied the interfacial growth behavior by reflection high energy electron diffraction (RHEED) and low-temperature scanning tunneling microscope (LT-STM). The effects of substrate temperature and Li/Fe flux ratio were investigated. Uniform LiFeAs film as thin as 3 quintuple-layer (QL) is formed. Superconducting gap appears in LiFeAs films thicker than 4 QL at 4.7 K. When the film is thicker than 13 QL, the superconducting gap determined by the distance between coherence peaks is about 7 meV, close to the value of bulk material. The ex situ transport measurement of thick LiFeAs film shows a sharp superconducting transition around 16 K. The upper critical field, Hc2(0)=13.0 T, is estimated from the temperature dependent magnetoresistance. The precise thickness and quality control of LiFeAs film paves the road of growing similar ultrathin iron arsenide films.
The growth of single layer graphene nanometer size domains by solid carbon source molecular beam epitaxy on hexagonal boron nitride (h-BN) flakes is demonstrated. Formation of single-layer graphene is clearly apparent in Raman spectra which display sharp optical phonon bands. Atomic-force microscope images and Raman maps reveal that the graphene grown depends on the surface morphology of the h-BN substrates. The growth is governed by the high mobility of the carbon atoms on the h-BN surface, in a manner that is consistent with van der Waals epitaxy. The successful growth of graphene layers depends on the substrate temperature, but is independent of the incident flux of carbon atoms.
Ternary chalcogenides such as the parkerites and shandites are a broad class of materials exhibiting rich diversity of transport and magnetic behavior as well as an array of topological phases including Weyl and Dirac nodes. However, they remain largely unexplored as high-quality epitaxial thin films. Here, we report the self-regulated growth of thin films of the strong spin-orbit coupled superconductor Pd3Bi2Se2 on SrTiO3 by molecular beam epitaxy. Films are found to grow in a self-regulated fashion, where, in excess Se, the temperature and relative flux ratio of Pd to Bi controls the formation of Pd3Bi2Se2 due to the combined volatility of Bi, Se, and Bi-Se bonded phases. The resulting films are shown to be of high structural quality, the stoichiometry is independent of the Pd:Bi and Se flux ratio and exhibit a superconducting transition temperature of 800 mK and critical field of 17.7 +/- 0.5 mT, as probed by transport as well as magnetometry. Understanding and navigating the growth of the chemically and structurally diverse classes of ternary chalcogenides opens a vast space for discovering new phenomena as well as enabling new applications.
The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction of PdCoO2 to cobalt oxide and metallic palladium. This is overcome by combining low temperature (300 {deg}C) atomic layer-by-layer MBE growth in the presence of reactive atomic oxygen with a post-growth high-temperature anneal. Thickness dependence (5-265 nm) reveals that in the thin regime (<75 nm), the resistivity scales inversely with thickness, likely dominated by surface scattering; for thicker films the resistivity approaches the values reported for the best bulk-crystals at room temperature, but the low temperature resistivity is limited by structural twins. This work shows that the combination of MBE growth and a post-growth anneal provides a route to creating high quality films in this interesting family of layered, triangular oxides.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
