Do you want to publish a course? Click here

Air Stable Doping and Intrinsic Mobility Enhancement in Monolayer $MoS_{2}$ by Amorphous $TiO_{x}$ Encapsulation

335   0   0.0 ( 0 )
 Added by Amritesh Rai
 Publication date 2016
  fields Physics
and research's language is English




Ask ChatGPT about the research

To reduce Schottky-barrier-induced contact and access resistance, and the impact of charged impurity and phonon scattering on mobility in devices based on 2D transition metal dichalcogenides (TMDs), considerable effort has been put into exploring various doping techniques and dielectric engineering using $high-kappa$ oxides, respectively. The goal of this work is to demonstrate a $high-kappa$ dielectric that serves as an effective n-type charge transfer dopant on monolayer (ML) molybdenum disulfide ($MoS_{2}$). Utilizing amorphous titanium suboxide (ATO) as the $high-kappa$ dopant, we achieved a contact resistance of ~ $180$ ${Omega}.{mu}m$ which is the lowest reported value for ML $MoS_{2}$. An ON current as high as $240$ ${mu}A/{mu}m$ and field effect mobility as high as $83$ $cm^2/V-s$ were realized using this doping technique. Moreover, intrinsic mobility as high as $102$ $cm^2/V-s$ at $300$ $K$ and $501$ $cm^2/V-s$ at $77$ $K$ were achieved after ATO encapsulation which are among the highest mobility values reported on ML $MoS_{2}$. We also analyzed the doping effect of ATO films on ML $MoS_{2}$, a phenomenon which is absent when stoichiometric $TiO_{2}$ is used, using ab initio density functional theory (DFT) calculations which shows excellent agreement with our experimental findings. Based on the interfacial-oxygen-vacancy mediated doping as seen in the case of $high-kappa$ ATO - ML $MoS_{2}$, we propose a mechanism for the mobility enhancement effect observed in TMD-based devices after encapsulation in a $high-kappa$ dielectric environment.



rate research

Read More

Two-dimensional (2D) high-temperature ferromagnetic materials are important for spintronic application. Fortunately, a highly-air-stable PdSe$_2$ monolayer semiconductor has been made through exfoliation from the layered bulk material. It is very highly desirable to realize robust ferromagnetism, even half-metallic ferromagnetism (100% spin polarization), in such excellent nonmagnetic monolayer semiconductors. Here, the first-principles investigation shows that the PdSe$_2$ monolayer can be made to attain Stoner ferromagnetism with the maximal Curie temperature reaching to 800K, and the hole concentration threshold for ferromagnetism decreases with applied uniaxial stress. Furthermore, half-metallicity can be achieved in some hole concentration regions. For the strain of 10% (uniaxial tensile stress of 4.4 N/m), the monolayer can attain half-metallic ferromagnetism up to 150 K. The magnetic anisotropic energy is suitable to not only stabilizing the 2D ferromagnetism but also realizing fast magnetization reversal. The magnetization can be also controlled by applying a transverse uniaxial stress. The highly-air-stable PdSe$_2$ monolayer, with these advantages, should be promising for spintronic applications.
Microscopic corrugations are ubiquitous in graphene even when placed on atomically flat substrates. These result in random local strain fluctuations limiting the carrier mobility of high quality hBN-supported graphene devices. We present transport measurements in hBN-encapsulated devices where such strain fluctuations can be in situ reduced by increasing the average uniaxial strain. When $sim0.2%$ of uniaxial strain is applied to the graphene, an enhancement of the carrier mobility by $sim35%$ is observed while the residual doping reduces by $sim39%$. We demonstrate a strong correlation between the mobility and the residual doping, from which we conclude that random local strain fluctuations are the dominant source of disorder limiting the mobility in these devices. Our findings are also supported by Raman spectroscopy measurements.
Skyrmions are localized solitonic spin textures with protected topology, which are promising as information carriers in ultra-dense and energy-efficient logic and memory devices. Recently, magnetic skyrmions have been observed in magnetic thin films, and are stabilized by the extrinsic interfacial Dzyaloshinskii-Moriya interaction (DMI) and/or external magnetic fields. The specific effects in magnetic monolayer materials have not been thoroughly studied. Here, we investigate the intrinsic magnetic skyrmions in a family of monolayer Janus van der Waals magnets, MnSTe, MnSeTe, VSeTe, and MnSSe, by the first-principles calculations combined with the micromagnetic simulations. The monolayer Janus MnSTe, MnSeTe, and VSeTe with out-of-plane geometric asymmetry and strong spin-orbit coupling (SOC) have a large intrinsic DMI, which could stabilize a sub-50 nm intrinsic skyrmions in monolayer MnSTe and MnSeTe at zero magnetic field. While monolayer VSeTe with in-plane easy axis forms magnetic domain rather than skyrmions. Moreover, the size and shape of skyrmions can be tuned by an external magnetic field. Therefore, our work motivates a new vista for seeking intrinsic skyrmions in atomic-scale magnets.
In this work we investigated the encapsulation of C$_20$ and C$_30$ fullerenes into semiconducting carbon nanotubes to study the possibility of bandgap engineering in such systems. Classical molecular dynamics simulations coupled to tight-binding calculations were used to determine the conformational and electronic properties of carbon nanotube supercells containing up to 12 fullerenes. We have observed that C$_20$ fullerenes behave similarly to a p-type dopant while C$_30$ ones work as n-type ones. For larger diameter nanotubes, where fullerene patterns start to differ from the linear arrangements (peapods), the doping features are preserved for both fullerenes, but local disorder plays an important role and significantly alters the electronic structure. The combined incorporation of both fullerene types (hybrid encapsulation) into the same nanotube leads to a behavior similar to that found in electronic junctions in Silicon-based electronic devices. These aspects can be exploited in the design of nanoelectronic devices using semiconducting carbon nanotubes.
We calculate an electron-phonon scattering and intrinsic transport properties of black phosphorus monolayer using tight-binding and Boltzmann treatments as a function of temperature, carrier density, and electric field. The low-field mobility shows weak dependence on density and, at room temperature, falls in the range of 300 - 1000 cm^2/Vs in the armchair direction and 50 - 120 cm^2/Vs in the zig-zag direction with the anisotropy due to an effective mass difference. At high fields, drift velocity is linear with electric field up to 1 - 2 V/micron reaching values of 10^7 cm/s in the armchair direction, unless self-heating effects are included.
comments
Fetching comments Fetching comments
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا