Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userIdentification via the Broadcast Channel
69
0
0.0
(
0
)
Added by
Annina Bracher
Publication date
2016
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
The identification (ID) capacity region of the two-receiver broadcast channel (BC) is shown to be the set of rate-pairs for which, for some distribution on the channel input, each receivers ID rate does not exceed the mutual information between the channel input and the channel output that it observes. Moreover, the capacity regions interior is achieved by codes with deterministic encoders. The results are obtained under the average-error criterion, which requires that each receiver reliably identify its message whenever the message intended for the other receiver is drawn at random. They hold also for channels whose transmission capacity region is to-date unknown. Key to the proof is a new ID code construction for the single-user channel. Extensions to the BC with one-sided feedback and the three-receiver BC are also discussed: inner bounds on their ID capacity regions are obtained, and those are shown to be in some cases tight.
rate research
Read More
The relay broadcast channel (RBC) is considered, in which a transmitter communicates with two receivers with the assistance of a relay. Based on different degradation orders among the relay and the receivers outputs, three types of physically degraded RBCs (PDRBCs) are introduced. Inner bounds and outer bounds are derived on the capacity region of the presented three types. The bounds are tight for two types of PDRBCs: 1) one receivers output is a degraded form of the other receivers output, and the relays output is a degraded form of the weaker receivers output; 2) one receivers output is a degraded form of the relays output, and the other receivers output is a degraded form of the relays output. For the Gaussian PDRBC, the bounds match, i.e., establish its capacity region.
The secrecy capacity region for the K-receiver degraded broadcast channel (BC) is given for confidential messages sent to the receivers and to be kept secret from an external wiretapper. Superposition coding and Wyners random code partitioning are used to show the achievable rate tuples. Error probability analysis and equivocation calculation are also provided. In the converse proof, a new definition for the auxiliary random variables is used, which is different from either the case of the 2-receiver BC without common message or the K-receiver BC with common message, both with an external wiretapper; or the K-receiver BC without a wiretapper.
We establish the deterministic-code capacity region of a network with one transmitter and two receivers: an ordinary receiver and a robust receiver. The channel to the ordinary receiver is a given (known) discrete memoryless channel (DMC), whereas the channel to the robust receiver is an arbitrarily varying channel (AVC). Both receivers are required to decode the common message, whereas only the ordinary receiver is required to decode the private message.
Integer-forcing (IF) precoding, also known as downlink IF, is a promising new approach for communication over multiple-input multiple-output (MIMO) broadcast channels. Inspired by the integer-forcing linear receiver for multiple-access channels, it generalizes linear precoding by inducing an effective channel matrix that is approximately integer, rather than approximately identity. Combined with lattice encoding and a pre-inversion of the channel matrix at the transmitter, the scheme has the potential to outperform any linear precoding scheme, despite enjoying similar low complexity. In this paper, a specific IF precoding scheme, called diagonally-scaled exact IF (DIF), is proposed and shown to achieve maximum spatial multiplexing gain. For the special case of two receivers, in the high SNR regime, an optimal choice of parameters is derived analytically, leading to an almost closed-form expression for the achievable sum rate. In particular, it is shown that the gap to the sum capacity is upper bounded by 0.27 bits for any channel realization. For general SNR, a regularized version of DIF (RDIF) is proposed. Numerical results for two receivers under Rayleigh fading show that RDIF can achieve performance superior to optimal linear precoding and very close to the sum capacity.
Imperfect channel state information degrades the performance of multiple-input multiple-output (MIMO) communications; its effect on single-user (SU) and multi-user (MU) MIMO transmissions are quite different. In particular, MU-MIMO suffers from residual inter-user interference due to imperfect channel state information while SU-MIMO only suffers from a power loss. This paper compares the throughput loss of both SU and MU MIMO on the downlink due to delay and channel quantization. Accurate closed-form approximations are derived for the achievable rates for both SU and MU MIMO. It is shown that SU-MIMO is relatively robust to delayed and quantized channel information, while MU MIMO with zero-forcing precoding loses spatial multiplexing gain with a fixed delay or fixed codebook size. Based on derived achievable rates, a mode switching algorithm is proposed that switches between SU and MU MIMO modes to improve the spectral efficiency, based on the average signal-to-noise ratio (SNR), the normalized Doppler frequency, and the channel quantization codebook size. The operating regions for SU and MU modes with different delays and codebook sizes are determined, which can be used to select the preferred mode. It is shown that the MU mode is active only when the normalized Doppler frequency is very small and the codebook size is large.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
