Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOn Clutter Ranks of Frequency Diverse Radar Waveforms
108
0
0.0
(
0
)
Added by
Yimin Liu
Publication date
2016
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Frequency diverse (FD) radar waveforms are attractive in radar research and practice. By combining two typical FD waveforms, the frequency diverse array (FDA) and the stepped-frequency (SF) pulse train, we propose a general FD waveform model, termed the random frequency diverse multi-input-multi-output (RFD-MIMO) in this paper. The new model can be applied to specific FD waveforms by adapting parameters. Furthermore, by exploring the characteristics of the clutter covariance matrix, we provide an approach to evaluate the clutter rank of the RFD-MIMO radar, which can be adopted as a quantitive metric for the clutter suppression potentials of FD waveforms. Numerical simulations show the effectiveness of the clutter rank estimation method, and reveal helpful results for comparing the clutter suppression performance of different FD waveforms.
rate research
Read More
In a typical MIMO radar scenario, transmit nodes transmit orthogonal waveforms, while each receive node performs matched filtering with the known set of transmit waveforms, and forwards the results to the fusion center. Based on the data it receives from multiple antennas, the fusion center formulates a matrix, which, in conjunction with standard array processing schemes, such as MUSIC, leads to target detection and parameter estimation. In MIMO radars with compressive sensing (MIMO-CS), the data matrix is formulated by each receive node forwarding a small number of compressively obtained samples. In this paper, it is shown that under certain conditions, in both sampling cases, the data matrix at the fusion center is low-rank, and thus can be recovered based on knowledge of a small subset of its entries via matrix completion (MC) techniques. Leveraging the low-rank property of that matrix, we propose a new MIMO radar approach, termed, MIMO-MC radar, in which each receive node either performs matched filtering with a small number of randomly selected dictionary waveforms or obtains sub-Nyquist samples of the received signal at random sampling instants, and forwards the results to a fusion center. Based on the received samples, and with knowledge of the sampling scheme, the fusion center partially fills the data matrix and subsequently applies MC techniques to estimate the full matrix. MIMO-MC radars share the advantages of the recently proposed MIMO-CS radars, i.e., high resolution with reduced amounts of data, but unlike MIMO-CS radars do not require grid discretization. The MIMO-MC radar concept is illustrated through a linear uniform array configuration, and its target estimation performance is demonstrated via simulations.
In this paper, we propose a new type of array antenna, termed the Random Frequency Diverse Array (RFDA), for an uncoupled indication of target direction and range with low system complexity. In RFDA, each array element has a narrow bandwidth and a randomly assigned carrier frequency. The beampattern of the array is shown to be stochastic but thumbtack-like, and its stochastic characteristics, such as the mean, variance, and asymptotic distribution are derived analytically. Based on these two features, we propose two kinds of algorithms for signal processing. One is matched filtering, due to the beampatterns good characteristics. The other is compressive sensing, because the new approach can be regarded as a sparse and random sampling of target information in the spatial-frequency domain. Fundamental limits, such as the Cramer-Rao bound and the observing matrixs mutual coherence, are provided as performance guarantees of the new array structure. The features and performances of RFDA are verified with numerical results.
We consider a colocated MIMO radar scenario, in which the receive antennas forward their measurements to a fusion center. Based on the received data, the fusion center formulates a matrix which is then used for target parameter estimation. When the receive antennas sample the target returns at Nyquist rate, and assuming that there are more receive antennas than targets, the data matrix at the fusion center is low-rank. When each receive antenna sends to the fusion center only a small number of samples, along with the sample index, the receive data matrix has missing elements, corresponding to the samples that were not forwarded. Under certain conditions, matrix completion techniques can be applied to recover the full receive data matrix, which can then be used in conjunction with array processing techniques, e.g., MUSIC, to obtain target information. Numerical results indicate that good target recovery can be achieved with occupancy of the receive data matrix as low as 50%.
Space-time adaptive processing (STAP) is an effective tool for detecting a moving target in the airborne radar system. Due to the fast-changing clutter scenario and/or non side-looking configuration, the stationarity of the training data is destroyed such that the statistical-based methods suffer performance degradation. Direct data domain (D3) methods avoid non-stationary training data and can effectively suppress the clutter within the test cell. However, this benefit comes at the cost of a reduced system degree of freedom (DOF), which results in performance loss. In this paper, by exploiting the intrinsic sparsity of the spectral distribution, a new direct data domain approach using sparse representation (D3SR) is proposed, which seeks to estimate the high-resolution space-time spectrum with only the test cell. The simulation of both side-looking and non side-looking cases has illustrated the effectiveness of the D3SR spectrum estimation using focal underdetermined system solution (FOCUSS) and norm minimization. Then the clutter covariance matrix (CCM) and the corresponding adaptive filter can be effectively obtained. Since D3SR maintains the full system DOF, it can achieve better performance of output signal-clutter-ratio (SCR) and minimum detectable velocity (MDV) than current D3 methods, e.g., direct data domain least squares (D3LS). Thus D3SR is more effective against the range-dependent clutter and interference in the non-stationary clutter scenario.
Optical communication systems, which operate at very high rates, are often limited by the sampling rate bottleneck. The optical wideband regime may exceed analog to digital converters (ADCs) front-end bandwidth. Multi-channel sampling approaches, such as multicoset or interleaved ADCs, have been proposed to sample the wideband signal using several channels. Each channel samples below the Nyquist rate such that the overall sampling rate is preserved. However, this scheme suffers from two practical limitations that make its implementation difficult. First, the inherent anti-aliasing filter of the samplers distorts the wideband signal. Second, it requires accurate time shifts on the order of the signals Nyquist rate, which are challenging to maintain. In this work, we propose an alternative multi-channel sampling scheme, the wideband demodulator for optical waveforms (WINDOW), based on analog RF demodulation, where each channel aliases the spectrum using a periodic mixing function before integration and sampling. We show that intentionally using the inherent ADC filter to perform integration increases the signal to noise ratio (SNR). We demonstrate both theoretically and through numerical experiments that our system outperforms multicoset in terms of signal recovery and symbol estimation in the presence of both thermal and quantization noise but is slightly less robust to timing jitter.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
