Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOn the warm absorber in AGN outflow
105
0
0.0
(
0
)
Added by
Tek Prasad Adhikari Mr.
Publication date
2016
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Warm absorber (WA) is an ionised gas present in the line of sight to the AGN central engine. The effect of the absorber is imprinted in the absorption lines observed in X-ray spectra of AGN. In this work, we model the WA in Seyfert 1 galaxy Mrk 509 using its recently published shape of broad band spectral energy distribution (SED) as a continuum illuminating the absorber. Using the photoionization code {sc Titan}, recently we have shown that the absorption measure distribution (AMD) found for this object can be successfully modelled as a single slab of gas in total pressure (radiation+gas) equilibrium, contrary to the usual models of constant density multiple slabs. We discuss the transmitted spectrum that would be recorded by an observer after the radiation from the nucleus passes through the WA.
rate research
Read More
Aims. We aim to investigate and characterise the photoionised X-ray emission line regions within NGC 7469. Methods. We apply the photoionisation model, PION, within the spectral fitting code SPEX to analyse the 640 ks RGS spectrum of NGC 7469 gathered during an XMM-Newton observing campaign in 2015. Results. We find the emission line region in NGC 7469 to be multiphased, consisting of two narrow components with ionisation parameters of $log xi = 0.4$ and 1.6. A third, broad emission component, with a broadening velocity of $v_b sim 1400$ km stextsuperscript{-1} and an outflow velocity of $v_{out} sim -4500$ km stextsuperscript{-1}, is required to fit the residuals in the O VII triplet, at around 22 AA. Assuming a volume filling factor of 0.1, the lower distance limits of the narrow emission line region components are estimated for the first time at 2.6 and 2.5 pc from the central black hole, whereas the broad component has an estimated lower bound distance between 0.004 to 0.03 pc, depending on the assumed plasma parameters. The collisionally ionised plasma from the star burst region in NGC 7469 has a plasma temperature of 0.32 keV and outflow velocity of $-280$ km stextsuperscript{-1}, consistent with previous results in this campaign. In addition, we model the photoionised plasma of the warm absorber (WA) in NGC 7469, and find that it consists of three photoionised phases, with different values of $xi$, $N_H$ and $v_{out}$. The upper bound distances of these WA components are 1.9, 0.3 and 0.6 pc, respectively, consistent with archival results. Conclusions. The environment of NGC 7469 is a complex mix of plasma winds absorbing and emitting X-rays. We find the picture painted by our results can be attributed to line emitting plasma located at distances ranging from near the black hole to the torus and beyond the ionised outflows.
This paper is a sequel to the extensive study of warm absorber (WA) in X-rays carried out using high resolution grating spectral data from XMM-Newton satellite (WAX-I). Here we discuss the global dynamical properties as well as the energetics of the WA components detected in the WAX sample. The slope of WA density profile ($npropto r^{-alpha}$) estimated from the linear regression slope of ionization parameter $xi$ and column density $N_H$ in the WAX sample is $alpha=1.236pm 0.034$. We find that the WA clouds possibly originate as a result of photo-ionised evaporation from the inner edge of the torus (torus wind). They can also originate in the cooling front of the shock generated by faster accretion disk outflows, the ultra-fast outflows (UFO), impinging onto the interstellar medium or the torus. The acceleration mechanism for the WA is complex and neither radiatively driven wind nor MHD driven wind scenario alone can describe the outflow acceleration. However, we find that radiative forces play a significant role in accelerating the WA through the soft X-ray absorption lines, and also with dust opacity. Given the large uncertainties in the distance and volume filling factor estimates of the WA, we conclude that the kinetic luminosity $dot{E}_k$ of WA may sometimes be large enough to yield significant feedback to the host galaxy. We find that the lowest ionisation states carry the maximum mass outflow, and the sources with higher Fe M UTA absorption ($15-17rm AA$) have more mass outflow rates.
We present the first analysis of the X-ray warm absorber and nuclear obscuration in the Seyfert 1.8 galaxy ESO 113-G010. We used archival data from a 100 ks XMM-Newton observation made in 2005. From high resolution spectroscopy analysis of the RGS data, we detect absorption lines originating from a warm absorber consisting of two distinct phases of ionisation, with log xi ~ 3.2 and 2.3 respectively. The higher-ionised component has a larger column density and outflow velocity (N_H ~ 1.6 x 10^22 cm^-2, v ~ -1100 km/s) than the lower-ionised component (N_H ~ 0.5 x 10^22 cm^-2, v ~ -700 km/s). The shape of the optical-UV continuum and the large Balmer decrement (H_alpha/H_beta ~ 8) indicate significant amount of reddening is taking place in our line of sight in the host galaxy of the AGN; however, the X-ray spectrum is not absorbed by cold neutral gas intrinsic to the source. We discuss different explanations for this discrepancy between the reddening and the X-ray absorption, and suggest that the most likely solution is a dusty warm absorber. We show that dust can exist in the lower-ionised phase of the warm absorber, which causes the observed reddening of the optical-UV emission, whereas the X-rays remain unabsorbed due to lack of cold neutral gas in the ionised warm absorber. Furthermore, we have investigated the uncertainties in the construction of the Spectral Energy Distribution (SED) of this object due to obscuration of the nuclear source and the effects this has on the photoionisation modelling of the warm absorber. We show how the assumed SEDs influence the thermal stability of each phase and whether or not the two absorber phases in ESO 113-G010 can co-exist in pressure equilibrium.
(Abridged) The archetypal Seyfert 1 galaxy NGC 5548 was observed in 2013-2014 in the context of an extensive multiwavelength campaign, which revealed the source to be in an extraordinary state of persistent heavy obscuration. We re-analyzed the archival grating spectra obtained by XMM-Newton and Chandra between 1999 and 2007 in order to characterize the classic warm absorber (WA) using consistent models and up-to-date photoionization codes and atomic physics databases and to construct a baseline model that can be used as a template for the WA in the 2013 observations. The WA in NGC 5548 is composed of 6 distinct ionization phases outflowing in 4 kinematic regimes in the form of a stratified wind with several layers intersected by our line of sight. If the changes in the WA are solely due to ionization or recombination processes in response to variations in the ionizing flux among the different observations, we are able to estimate lower limits on the density of the WA, finding that the farthest components are less dense and have a lower ionization. These limits are used to put stringent upper limits on the distance of the WA components from the central ionizing source, with the lowest ionization phases <50, <20, and <5 pc, respectively, while the intermediately ionized components lie at <3.6 and <2.2 pc from the center, respectively. The highest ionization component is located at ~0.6 pc or closer to the AGN central engine. The mass outflow rate summed over all WA components is ~0.3 Msun/yr, about six times the nominal accretion rate of the source. The total kinetic luminosity injected into the ISM is a small fraction (~0.03%) of the bolometric luminosity of the source. After adding the contribution of the UV absorbers, this value augments to ~0.2% of the bolometric luminosity, well below the minimum amount of energy required by current feedback models to regulate galaxy evolution.
We investigate the applicability of inhomogeneous absorber models in the formation of AGN outflow absorption-troughs. The models we explore are limited to monotonic gradients of absorbing column densities in front of a finite emission source. Our main finding is that simple power-law and gaussian distributions are hard pressed to fit the Mrk 279 high-quality UV outflow data. An acceptable fit for the O VI troughs can only be obtained by assuming unrealistic optical depth values (upward of 100). The strongest constraints arise from the attempt to fit the Lyman series troughs. In this case it is evident that even allowing for complete freedom of both the power-law exponent and the optical depth as a function of velocity cannot yield an acceptable fit. In contrast, partial covering models do yield good fits for the Lyman series troughs. We conclude that monotonic inhomogeneous absorber models that do not include a sharp edge in the optical depth distribution across the source are not an adequate physical model to explain the trough formation mechanism for the outflow observed in Mrk 279.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
