Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe dust grain size - stellar luminosity trend in debris discs
93
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The cross section of material in debris discs is thought to be dominated by the smallest grains that can still stay in bound orbits despite the repelling action of stellar radiation pressure. Thus the minimum (and typical) grain size $s_text{min}$ is expected to be close to the radiation pressure blowout size $s_text{blow}$. Yet a recent analysis of a sample of Herschel-resolved debris discs showed the ratio $s_text{min}/s_text{blow}$ to systematically decrease with the stellar luminosity from about ten for solar-type stars to nearly unity in the discs around the most luminous A-type stars. Here we explore this trend in more detail, checking how significant it is and seeking to find possible explanations. We show that the trend is robust to variation of the composition and porosity of dust particles. For any assumed grain properties and stellar parameters, we suggest a recipe of how to estimate the true radius of a spatially unresolved debris disc, based solely on its spectral energy distribution. The results of our collisional simulations are qualitatively consistent with the trend, although additional effects may also be at work. In particular, the lack of grains with small $s_text{min}/s_text{blow}$ for lower luminosity stars might be caused by the grain surface energy constraint that should limit the size of the smallest collisional fragments. Also, a better agreement between the data and the collisional simulations is achieved when assuming debris discs of more luminous stars to have higher dynamical excitation than those of less luminous primaries. This would imply that protoplanetary discs of more massive young stars are more efficient in forming big planetesimals or planets that act as stirrers in the debris discs at the subsequent evolutionary stage.
rate research
Read More
In most debris discs, dust grain dynamics is strongly affected by stellar radiation pressure. As this mechanism is size-dependent, we expect dust grains to be spatially segregated according to their sizes. However, because of the complex interplay between radiation pressure, collisions and dynamical perturbations, this spatial segregation of the particle size distribution (PSD) has proven difficult to investigate with numerical models. We propose to explore this issue using a new-generation code that can handle some of the coupling between dynamical and collisional effects. We investigate how PSDs behave in both unperturbed discs at rest and in discs pertubed by planetary objects. We use the DyCoSS code of Thebault(2012) to investigate the coupled effect of collisions, radiation pressure and dynamical perturbations in systems having reached a steady state. We consider 2 setups: a narrow ring perturbed by an exterior planet, and an extended disc into which a planet is embedded. For both setups we consider an additional unperturbed case with no planet. We also investigate how possible spatial size segregation affect disc images at different wavelengths. We find that PSDs are always strongly spatially segregated. The only case for which they follow a standard dn/dr = C.r**(-3.5) law is for an unperturbed narrow ring, but only within the parent body ring itself. For all other configurations, the PSD can strongly depart from such power laws and have strong spatial gradients. As an example, the geometrical cross section of the disc is rarely dominated by the smallest grains on bound orbits, as it is expected to be in standard PSDs in s**q with q<-3. Although the exact profiles and spatial variations of PSDs are a complex function of the considered set-up, we are however able to derive some robust results that should be useful for image-or-SED-fitting models of observed discs.
388 -
Ing-Guey Jiang Department of Physics andn Institute of Astronomy
, National Tsing-Hua University
2009
This study employed grain dynamic models to examine the density distribution of debris discs, and discussed the effects of the collisional time-intervals of asteroidal bodies, the maximum grain sizes, and the chemical compositions of the dust grains of the models, in order to find out whether a steady out-moving flow with an 1/R profile could be formed. The results showed that a model with new grains every 100 years, a smaller maximum grain size, and a composition C400 has the best fit to the 1/R profile because: (1) the grains have larger values of beta on average,therefore, they can be blown out easily; (2) the new grains are generated frequently enough to replace those have been blown out. With the above two conditions, some other models can have a steady out-moving flow with an approximate 1/R profile. However, those models in which new grains are generated every 1000 years have density distributions far from the profile of a continuous out-moving flow. Moreover, the analysis on the signatures of planets in debris discs showed that there are no indications when a planet is in a continuous out-moving flow, however, the signatures are obvious in a debris disc with long-lived grains.
380 -
Ing-Guey Jiang Department of Physics andn Institute of Astronomy
, National Tsing-Hua University
2009
Through Spitzer Space Telescopes observations, Su et al. (2005) show that the Vega debris disc is dominated by grains which are small enough to be blown out by radiation pressure. This implies the lifetime of Vega debris discs grains is relatively short, about 1000 years, and a continuous dust production is necessary to maintain the observed debris disc. However, Krivov et al. (2006)s theoretical calculations show that the Vega debris disc is dominated by 10 micro-meter grains, which would be in bound orbits and thus long-lived, provided that the disc is in a steady state. In order to solve the above contradiction, through dynamical simulations, we determine the grains orbital evolutions and density profiles and seek a model of size distribution which can reproduce the observed surface brightness. Our results show that a self-consistent dynamical model with a 1/R disc density profile can be constructed when the grains have a power-law size distribution. Moreover, both types of models, dominated by short-lived and long-lived grains, are consistent with the observational data.
It has recently been shown that turbulence in the interstellar medium (ISM) can significantly accelerate the growth of dust grains by accretion of molecules, but the turbulent gas-density distribution also plays a crucial role in shaping the grain-size distribution. The growth velocity, i.e., the rate of change of the mean grain radius, is proportional to the local gas density if the growth species (molecules) are well-mixed in the gas. As a consequence, grain growth happens at vastly different rates in different locations, since the gas-density distribution of the ISM shows a considerable variance. Here, it is shown that grain-size distribution (GSD) rapidly becomes a reflection of the gas-density distribution, irrespective of the shape of the initial GSD. This result is obtained by modelling ISM turbulence as a Markov process, which in the special case of an Ornstein-Uhlenbeck process leads to a lognormal gas-density distribution, consistent with numerical simulations of isothermal compressible turbulence. This yields an approximately lognormal GSD; the sizes of dust grains in cold ISM clouds may thus not follow the commonly adopted power-law GSD with index -3.5, but corroborates the use of a log-nomral GSD for large grains, suggested by several studies. It is also concluded that the very wide range of gas densities obtained in the high Mach-number turbulence of molecular clouds must allow formation of a tail of very large grains reaching radii of several microns.
We estimate the mass loss rates of photoevaporative winds launched from the outer edge of protoplanetary discs impinged by an ambient radiation field. We focus on mild/moderate environments (the number of stars in the group/cluster is N ~ 50), and explore disc sizes ranging between 20 and 250 AU. We evaluate the steady-state structures of the photoevaporative winds by coupling temperature estimates obtained with a PDR code with 1D radial hydrodynamical equations. We also consider the impact of dust dragging and grain growth on the final mass loss rates. We find that these winds are much more significant than have been appreciated hitherto when grain growth is included in the modelling: in particular, mass loss rates > 1e-8 M_sun/yr are predicted even for modest background field strengths ( ~ 30 G_0) in the case of discs that extend to R > 150 AU. Grain growth significantly affects the final mass loss rates by reducing the average cross section at FUV wavelengths, and thus allowing a much more vigorous flow. The radial profiles of observable quantities (in particular surface density, temperature and velocity patterns) indicate that these winds have characteristic features that are now potentially observable with ALMA. In particular, such discs should have extended gaseous emission that is dust depleted in the outer regions, characterised by a non-Keplerian rotation curve, and with a radially increasing temperature gradient.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
