Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAutomated fabrication technique of gold tips for use in point-contact spectroscopy
382
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
For a successful point-contact spectroscopy (PCS) measurement, metallic tips of proper shape and smoothness are essential to ensure the ballistic nature of a point-contact junction. Until recently, the fabrication of Au tips suitable for use in point-contact spectroscopy has remained more of an art involving a trial and error method rather than an automated scientific process. To address these issues, we have developed a technique with which one can prepare high quality Au tips reproducibly and systematically. It involves an electronic control of the driving voltages used for an electrochemical etching of a gold wire in an HCl-glycerol mixture or an HCl solution. We find that a stopping current, below which the circuit is set to shut off, is a single very important parameter to produce an Au tip of desired shape. We present detailed descriptions for a two-step etching process for Au tips and also test results from PCS measurements using them.
rate research
Read More
In the hole-doped $d_{x^{2}-y^{2}}$-wave cuprate superconductor, due to the midgap surface state (MSS), a zero bias conductance peak (ZBCP) is widely observed in [110] interface point contact spectroscopy (PCS). However, ZBCP of this geometry is rarely observed in the electron-doped cuprates, even though their pairing symmetry is still likely the $d_{x^{2}-y^{2}}$-wave. We argue that this is due to the coexistence of antiferromagnetic (AF) and the superconducting (SC) orders. Generalizing the Blonder-Tinkham-Klapwijk (BTK) formula to include an AF coupling, it is shown explicitly that the MSS is destroyed by the AF order. The calculated PCS is in good agreement with the experiments.
We present Scanning Tunneling Spectroscopy measurements at 0.1 K using tips made of Al. At zero field, the atomic lattice and charge density wave of 2HNbSe2 are observed, and under magnetic fields the peculiar electronic surface properties of vortices are precisely resolved. The tip density of states is influenced by the local magnetic field of the vortex, providing for a new probe of the magnetic field at nanometric sizes.
Our previous point-contact Andreev reflection studies of the heavy-fermion superconductor CeCoIn$_5$ using Au tips have shown two clear features: reduced Andreev signal and asymmetric background conductance [1]. To explore their physical origins, we have extended our measurements to point-contact junctions between single crystalline heavy-fermion metals and superconducting Nb tips. Differential conductance spectra are taken on junctions with three heavy-fermion metals, CeCoIn$_5$, CeRhIn$_5$, and YbAl$_3$, each with different electron mass. In contrast with Au/CeCoIn$_5$ junctions, Andreev signal is not reduced and no dependence on effective mass is observed. A possible explanation based on a two-fluid picture for heavy fermions is proposed. [1] W. K. Park et al., Phys. Rev. B 72 052509 (2005); W. K. Park et al., Proc. SPIE-Int. Soc. Opt. Eng. 5932 59321Q (2005); W. K. Park et al., Physica C (in press) (cond-mat/0606535).
P-type point contact (PPC) germanium detectors are used in rare event and low-background searches, including neutrinoless double beta (0vbb) decay, low-energy nuclear recoils, and coherent elastic neutrino-nucleus scattering. The detectors feature an excellent energy resolution, low detection thresholds down to the sub-keV range, and enhanced background rejection capabilities. However, due to their large passivated surface, separating the signal readout contact from the bias voltage electrode, PPC detectors are susceptible to surface effects such as charge build-up. A profound understanding of their response to surface events is essential. In this work, the response of a PPC detector to alpha and beta particles hitting the passivated surface was investigated in a multi-purpose scanning test stand. It is shown that the passivated surface can accumulate charges resulting in a radial-dependent degradation of the observed event energy. In addition, it is demonstrated that the pulse shapes of surface alpha events show characteristic features which can be used to discriminate against these events.
The point-contact spectroscopy, in contrast to the tunneling spectrocopy, considers small electrical contacts with direct conductivity. In the normal state, it enables one to measure the spectral function of electron-boson interaction. In the superconducting state, new features appear connected with the energy dependence of excess current. The non-linearities of the current-voltage characteristic are due to: i) The inelastic scattering of electron quasiparticles in the contact region; ii) The energy dependence of the superconducting energy gap, and iii) The non-equilibrium superconducting effects. These effects are discussed from the experimental point of view
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
