No Arabic abstract
The dynamics of quantized magnetic vortices and their pinning by materials defects determine electromagnetic properties of superconductors, particularly their ability to carry non-dissipative currents. Despite recent advances in the understanding of the complex physics of vortex matter, the behavior of vortices driven by current through a multi-scale potential of the actual materials defects is still not well understood, mostly due to the scarcity of appropriate experimental tools capable of tracing vortex trajectories on nanometer scales. Using a novel scanning superconducting quantum interference microscope we report here an investigation of controlled dynamics of vortices in lead films with sub-Angstrom spatial resolution and unprecedented sensitivity. We measured, for the first time, the fundamental dependence of the elementary pinning force of multiple defects on the vortex displacement, revealing a far more complex behavior than has previously been recognized, including striking spring softening and broken-spring depinning, as well as spontaneous hysteretic switching between cellular vortex trajectories. Our results indicate the importance of thermal fluctuations even at 4.2 K and of the vital role of ripples in the pinning potential, giving new insights into the mechanisms of magnetic relaxation and electromagnetic response of superconductors.
We have developed a picovoltmeter using a Nb dc Superconducting QUantum Interference Device (SQUID) for measuring the flux-flow voltage from a small number of vortices moving through a submicron weak-pinning superconducting channel. We have applied this picovoltmeter to measure the vortex response in a single channel arranged in a circle on a Corbino disk geometry. The circular channel allows the vortices to follow closed orbits without encountering any sample edges, thus eliminating the influence of entry barriers.
We study effects of pinning on the dynamics of a vortex lattice in a type II superconductor in the strong-pinning situation and determine the force--velocity (or current--voltage) characteristic combining analytical and numerical methods. Our analysis deals with a small density $n_p$ of defects that act with a large force $f_p$ on the vortices, thereby inducing bistable configurations that are a characteristic feature of strong pinning theory. We determine the velocity-dependent average pinning-force density $langle F_p(v)rangle$ and find that it changes on the velocity scale $v_p sim f_p/eta a_0^3$, where $eta$ is the viscosity of vortex motion and $a_0$ the distance between vortices. In the small pin-density limit, this velocity is much larger than the typical flow velocity $v_c sim F_c/eta$ of the free vortex system at drives near the critical force-density $F_c = langle F_p(v=0)rangle propto n_p f_p$. As a result, we find a generic excess-force characteristic, a nearly linear force--velocity characteristic shifted by the critical force-density $F_c$; the linear flux-flow regime is approached only at large drives. Our analysis provides a derivation of Coulombs law of dry friction for the case of strong vortex pinning.
Type-II superconductors owe their magnetic and transport properties to vortex pinning, the immobilization of flux quanta through material inhomogeneities or defects. Characterizing the potential energy landscape for vortices, the pinning landscape (or short, pinscape), is of great technological importance. Besides measurement of the critical current density $j_c$ and of creep rates $S$, the $ac$ magnetic response provides valuable information on the pinscape which is different from that obtained through $j_c$ or $S$, with the Campbell penetration depth $lambda_{rm scriptscriptstyle C}$ defining a characteristic quantity well accessible in an experiment. Here, we derive a microscopic expression for the Campbell penetration depth $lambda_{rm scriptscriptstyle C}$ using strong pinning theory. Our results explain the dependence of $lambda_{rm scriptscriptstyle C}$ on the state preparation of the vortex system and the appearance of hysteretic response. Analyzing different pinning models, metallic or insulating inclusions as well as $delta T_c$- and $delta ell$-pinning, we discuss the behavior of the Campbell length for different vortex state preparations within the phenomenological $H$-$T$ phase diagram and compare our results with recent experiments.
A conformal pinning array can be created by conformally transforming a uniform triangular pinning lattice to produces a new structure in which the six-fold ordering of the original lattice is conserved but where there is a spatial gradient in the density of pinning sites. Here we examine several aspects of vortices interacting with conformal pinning arrays and how they can be used to create a flux flow diode effect for driving vortices in different directions across the arrays. Under the application of an ac drive, a pronounced vortex ratchet effect occurs where the vortices flow in the easy direction of the array asymmetry. When the ac drive is applied perpendicular to the asymmetry direction of the array, it is possible to realize a transverse vortex ratchet effect where there is a generation of a dc flow of vortices perpendicular to the ac drive due to the creation of a noise correlation ratchet by the plastic motion of the vortices. We also examine vortex transport simulations in experiments and compare the pinning effectiveness of conformal arrays to uniform triangular pinning arrays. We find that a triangular array generally pins the vortices more effectively at the first matching field and below, while the conformal array is more effective at higher fields where interstitial vortex flow occurs.
We study magnetic flux interacting with arrays of pinning sites (APS) placed on vertices of hyperbolic tesselations (HT). We show that, due to the gradient in the density of pinning sites, HT APS are capable of trapping vortices for a broad range of applied magnetic fluxes. Thus, the penetration of magnetic field in HT APS is essentially different from the usual scenario predicted by the Bean model. We demonstrate that, due to the enhanced asymmetry of the surface barrier for vortex entry and exit, this HT APS could be used as a capacitor to store magnetic flux.