Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMacromechanical behavior of oxide nanopowders during compaction processes
98
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Two granular systems (I and II) corresponding oxide nanopowders having different agglomeration tendency are simulated by the granular dynamics method. The particle size is 10 nanometer. The interaction of particles involves the elastic forces of repulsion, the tangential forces of friction, the dispersion forces of attraction, and in the case of II system the opportunity of creation/destruction of hard bonds of chemical nature. The processes of the uniaxial compaction, the biaxial (radial) one, the isotropic one, the compaction combined with shear deformation as well as the simple shear deformation are studied. The effect of the positive dilatancy is found out in the processes of shear deformation. The loading surfaces of nanopowders are constructed in the space of stress tensor invariants, i.e., the hydrostatic pressure and the deviator intensity. It is revealed that the form of the loading surfaces is similar to an ellipse, which is shifted along the hydrostatic axis to compressive pressures. The associated flow rule is analyzed. The nonorthogonality of the deformation vectors to the loading surface is established in the both systems modeled.
rate research
Read More
Transparent Al2O3 ceramics have attracted considerable interest for use in a wide range of optical, electronic and structural applications. The fabrication of these ceramics using powder metallurgy processes requires the development of theoretical approaches to the compaction of nanopowders. In this work, we investigate the compaction processes of two model granular systems imitating Al2O3 nanosized powders. System I is a loosely aggregated powder, and system II is a powder strongly inclined to agglomeration (for instance, calcined powder). The processes of isostatical (uniform), biaxial, and uniaxial compaction as well as uniaxial compaction with simultaneous shear deformation are studied. The energy parameters of compaction such as the energy change of elastic interparticle interactions and dispersion interactions, dissipative energy losses related to the processes of interparticle friction, and the total work of compaction are calculated for all the processes. The nonapplicability of the associated flow rule to the description of deformation processes of oxide nanopowders is shown and an alternative plastic flow rule is suggested. A complete system of determining the relationship of the flow including analytical approximations of yield surfaces is obtained.
Manganese oxides have received much attention over the years among the wide range of electrocatalysts for the oxygen evolution reaction (OER) due to their low toxicity, high abundance and rich redox chemistry. While many previous studies focused on the activity of these materials, a better understanding of the material transformations relating to activation or degradation is highly desirable, both from a scientific perspective and for applications. We electrodeposited Na-containing MnOx without long-range order from an alkaline solution to investigate these aspects by cyclic voltammetry, scanning electron microscopy and x-ray absorption spectroscopy at the Mn-K and Mn-L edges. The pristine film was assigned to a layered edge-sharing Mn3+/4+ oxide with Mn-O bond lengths of mainly 1.87 {AA} and some at 2.30 {AA} as well as Mn-Mn bond lengths of 2.87 {AA} based on fits to the extended x-ray fine structure. The decrease of the currents at voltages before the onset of the OER followed power laws with three different exponents depending on the number of cycles and the Tafel slope decreases from 186 pm 48 to 114 pm 18 mV dec-1 after 100 cycles, which we interpret in the context of surface coverage with unreacted intermediates. Post-mortem microscopy and bulk spectroscopy at the Mn-K edge showed no change of the microstructure, bulk local structure or bulk Mn valence. Yet, the surface region of MnOx oxidized toward Mn4+, which explains the reduction of the currents in agreement with literature. Surprisingly, we find that MnOx reactivates after 30 min at open-circuit (OC), where the currents and also the Tafel slope increase. Reactivation processes during OC are crucial because OC is unavoidable when coupling the electrocatalysts to intermittent power sources such as solar energy for sustainable energy production.
The magnetic anisotropy of La0.7Sr0.3MnO3 nanopowders was measured as a function of temperature by the modified singular point detection technique. In this method singularities indicating the anisotropy field were determined analyzing ac susceptibility data. The observed relationship between temperature dependence of anisotropy constant and temperature dependence of magnetization was used to deduce the origin of magnetic anisotropy in the nanopowders. It was shown that magnetic anisotropy of La0.7Sr0.3MnO3 nanopowder is determined by two-ion (dipolar or pseudodipolar) and single-ion mechanisms.
ZnCoO is one of the most studied and promising semiconductor materials for spintronics applications. In this work we discuss optical and electrical properties of ZnCoO films and nanoparticles grown at low temperature by either Atomic Layer Deposition or by a microwave driven hydrothermal method. We report that doping with Cobalt quenches a visible photoluminescence (PL) of ZnO. We could observe a visible PL of ZnO only for samples with very low Co fractions (up to 1%). Mechanisms of PL quenching in ZnCoO are discussed. We also found that ZnO films remained n-type conductive after doping with Co, indicating that a high electron concentration and Cobalt 2+ charge state can coexist.
Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have introduced the direct-lattice-transformation approach. This simple and explicit construction procedure led to extremely good cloaking results in the static case. Here, we transfer this approach to the dynamic case, i.e., to elastic waves or phonons. We demonstrate broadband reduction of scattering, with best suppressions exceeding a factor of five when using cubic coordinate transformations instead of linear ones. To reliably and quantitatively test these cloaks efficiency, we use an effective-medium approach.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
