Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userImpact inducted surface heating by planetesimals on early Mars
302
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We investigate the influence of impacts of large planetesimals and small planetary embryos on the early Martian surface on the hydrodynamic escape of an early steam atmosphere that is exposed to the high soft X-ray and EUV flux of the young Sun. Impact statistics in terms of number, masses, velocities, and angles of asteroid impacts onto the early Mars are determined via n-body integrations. Based on these statistics, smoothed particle hydrodynamics (SPH) simulations result in estimates of energy transfer into the planetary surface material and according surface heating. For the estimation of the atmospheric escape rates we applied a soft X-ray and EUV absorption model and a 1-D upper atmosphere hydrodynamic model to a magma ocean-related catastrophically outgassed steam atmosphere with surface pressure values of 52 bar H2O and 11 bar CO2. The estimated impact rates and energy deposition onto an early Martian surface can account for substantial heating. The energy influx and conversion rate into internal energy is most likely sufficient to keep a shallow magma ocean liquid for an extended period of time. Higher surface temperatures keep the outgassed steam atmosphere longer in vapor form and therefore enhance its escape to space within about 0.6 Myr after its formation.
rate research
Read More
The formation of the solar systems giant planets predated the ultimate epoch of massive impacts that concluded the process of terrestrial planet formation. Following their formation, the giant planets orbits evolved through an episode of dynamical instability. Several qualities of the solar system have recently been interpreted as evidence of this event transpiring within the first ~100 Myr after the Suns birth; around the same time as the final assembly of the inner planets. In a series of recent papers we argued that such an early instability could resolve several problems revealed in classic numerical studies of terrestrial planet formation; namely the small masses of Mars and the asteroid belt. In this paper, we revisit the early instability scenario with a large suite of simulations specifically designed to understand the degree to which Earth and Mars formation are sensitive to the specific evolution of Jupiter and Saturns orbits. By deriving our initial terrestrial disks directly from recent high-resolution simulations of planetesimal accretion, our results largely confirm our previous findings regarding the instabilitys efficiency of truncating the terrestrial disk outside of the Earth-forming region in simulations that best replicate the outer solar system. Moreover, our work validates the primordial 2:1 Jupiter-Saturn resonance within the early instability framework as a viable evolutionary path for the solar system. While our simulations elucidate the fragility of the terrestrial system during the epoch of giant planet migration, many realizations yield outstanding solar system analogs when scrutinized against a number of observational constraints. Finally, we highlight the inability of models to form adequate Mercury-analogs and the low eccentricities of Earth and Venus as the most significant outstanding problems for future numerical studies to resolve.
Impacts between planetesimals have largely been ruled out as a heat source in the early Solar System, by calculations that show them to be an inefficient heat source and unlikely to cause global heating. However, the long-term, localized thermal effects of impacts on planetesimals have never been fully quantified. Here, we simulate a range of impact scenarios between planetesimals to determine the post-impact thermal histories of the parent bodies, and hence the importance of impact heating in the thermal evolution of planetesimals. We find on a local scale that heating material to petrologic type 6 is achievable for a range of impact velocities and initial porosities, and impact melting is possible in porous material at a velocity of > 4 km/s. Burial of heated impactor material beneath the impact crater is common, insulating that material and allowing the parent body to retain the heat for extended periods (~ millions of years). Cooling rates at 773 K are typically 1 - 1000 K/Ma, matching a wide range of measurements of metallographic cooling rates from chondritic materials. While the heating presented here is localized to the impact site, multiple impacts over the lifetime of a parent body are likely to have occurred. Moreover, as most meteorite samples are on the centimeter to meter scale, the localized effects of impact heating cannot be ignored.
Disruptive collisions have been regarded as an important process for planet formation, while non-disruptive, small-scale collisions (hereafter called erosive collisions) have been underestimated or neglected by many studies. However, recent studies have suggested that erosive collisions are also important to the growth of planets, because they are much more frequent than disruptive collisions. Although the thresholds of the specific impact energy for disruptive collisions (Q_RD^*) have been investigated well, there is no reliable model for erosive collisions. In this study, we systematically carried out impact simulations of gravity-dominated planetesimals for a wide range of specific impact energy (Q_R) from disruptive collisions (Q_R ~ Q_RD^*) to erosive ones (Q_R << Q_RD^*) using the smoothed particle hydrodynamics method. We found that the ejected mass normalized by the total mass (M_ej/M_tot) depends on the numerical resolution, the target radius (R_tar) and the impact velocity (v_imp), as well as on Q_R, but that it can be nicely scaled by Q_RD^* for the parameter ranges investigated (R_tar = 30-300 km, v_imp = 2-5 km/s). This means that M_ej/M_tot depends only on Q_R/Q_RD^* in these parameter ranges. We confirmed that the collision outcomes for much less erosive collisions (Q_R < 0.01 Q_RD^*) converge to the results of an impact onto a planar target for various impact angles and that M_ej/M_tot = C * QR/QRD* holds. For disruptive collisions (Q_R ~ Q_RD^*), the curvature of the target has a significant effect on Mej/Mtot. We also examined the angle-averaged value of M_ej/M_tot and found that the numerically obtained relation between angle-averaged M_ej/M_tot and Q_R/Q_RD^* is very similar to the cases for 45-degree impacts. We proposed a new erosion model based on our numerical simulations for future research on planet formation with collisional erosion.
The presence of valleys on ancient terrains of Mars suggest that liquid water flowed on the martian surface 3.8 billion years ago or before. The above-freezing temperatures required to explain valley formation could have been transient, in response to frequent large meteorite impacts on early Mars, or they could have been caused by long-lived greenhouse warming. Climate models that consider only the greenhouse gases carbon dioxide and water vapor have been unable to recreate warm surface conditions, given the lower solar luminosity at that time. Here we use a one-dimensional climate model to demonstrate that an atmosphere containing 1.3-4 bar of CO2 and water vapor, along with 5 to 20 percent H2, could have raised the mean surface temperature of early Mars above the freezing point of water. Vigorous volcanic outgassing from a highly reduced early martian mantle is expected to provide sufficient atmospheric H2 and CO2, the latter from the photochemical oxidation of outgassed CH4 and CO, to form a CO2-H2 greenhouse. Such a dense early martian atmosphere is consistent with independent estimates of surface pressure based on cratering data.
The presence of the ancient valley networks on Mars indicates that the climate at 3.8 Ga was warm enough to allow substantial liquid water to flow on the martian surface for extended periods of time. However, the mechanism for producing this warming continues to be debated. One hypothesis is that Mars could have been kept warm by global cirrus cloud decks in a CO2-H2O atmosphere containing at least 0.25 bar of CO2 (Urata and Toon, 2013). Initial warming from some other process, e.g., impacts, would be required to make this model work. Those results were generated using the CAM 3-D global climate model. Here, we use a single-column radiative-convective climate model to further investigate the cirrus cloud warming hypothesis. Our calculations indicate that cirrus cloud decks could have produced global mean surface temperatures above freezing, but only if cirrus cloud cover approaches ~75 - 100% and if other cloud properties (e.g., height, optical depth, particle size) are chosen favorably. However, at more realistic cirrus cloud fractions, or if cloud parameters are not optimal, cirrus clouds do not provide the necessary warming, suggesting that other greenhouse mechanisms are needed.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
