Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTransit Search from Antarctica and Chile - Comparison and Combination
118
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Observing sites at the East-Antarctic plateau are considered to provide exceptional conditions for astronomy. The aim of this work is to assess its potential for detecting transiting extrasolar planets through a comparison and combination of photometric data from Antarctica with time series from a midlatitude site. During 2010, the two small aperture telescopes ASTEP 400 (Dome C) and BEST II (Chile) together performed an observing campaign of two target fields and the transiting planet WASP-18b. For the latter, a bright star, Dome C appears to yield an advantageous signal-to-noise ratio. For field surveys, both Dome C and Chile appear to be of comparable photometric quality. However, within two weeks, observations at Dome C yield a transit detection efficiency that typically requires a whole observing season in Chile. For the first time, data from Antarctica and Chile have been combined to extent the observational duty cycle. This approach is both feasible in practice and favorable for transit search, as it increases the detection yield by 12-18%.
rate research
Read More
This paper discusses the transit model fitting and multiple-planet search algorithms and performance of the Kepler Science Data Processing Pipeline, developed by the Kepler Science Operations Center (SOC). Threshold Crossing Events (TCEs), which are transit candidate events, are generated by the Transiting Planet Search (TPS) component of the pipeline and subsequently processed in the Data Validation (DV) component. The transit model is used in DV to fit TCEs in order to characterize planetary candidates and to derive parameters that are used in various diagnostic tests to classify them. After the signature associated with the TCE is removed from the light curve of the target star, the residual light curve goes through TPS again to search for additional TCEs. The iterative process of transit model fitting and multiple-planet search continues until no TCE is generated from the residual light curve or an upper limit is reached. The transit model fitting and multiple-planet search performance of the final release (9.3, January 2016) of the pipeline is demonstrated with the results of the processing of 4 years (17 quarters) of flight data from the primary Kepler Mission. The transit model fitting results are accessible from the NASA Exoplanet Archive. The final version of the SOC codebase is available through GitHub.
The summit of the Antarctic plateau, Dome A, is proving to be an excellent site for optical, NIR, and THz astronomical observations. GATTINI was a wide-field camera installed on the PLATO instrument module as part of the Chinese-led traverse to Dome A in January, 2009. We present here the measurements of sky brightness with the Gattini ultra-large field of view (90 deg x 90 deg) in the photometric B-, V-, and R-bands, cloud cover statistics measured during the 2009 winter season, and an estimate of the sky transparency. A cumulative probability distribution indicates that the darkest 10% of the nights at Dome A have sky brightness of S_B = 22.98, S_V = 21.86, and S_R = 21.68 mag arcsec^{-2}. These values were obtained around the year 2009 with minimum aurora, and they are comparable to the faintest sky brightness at Mauna Kea and the best sites of northern Chile. Since every filter includes strong auroral lines that effectively contaminate the sky brightness measurements, for instruments working around the auroral lines, either with custom filters or with high spectral resolution instruments, these values could be easily obtained on a more routine basis. In addition, we present example light curves for bright targets to emphasize the unprecedented observational window function available from this ground-based site. These light curves will be published in a future paper.
Planet Formation research is blooming in an era where we are moving from speaking about protoplanetary disks to planet forming disks (Andrews et al., 2018). However, this transition is still motivated by indirect (but convincing) hints. Up to date, the direct detection of planets in the making remains elusive with the remarkable exception of PDS70b and c (Haffert et al., 2019; Keppler et al., 2018; Muller et al., 2018). The scarcity of detections is attributable to technical challenges, and even for the rare jewels that we can detect, characterization (resolving their hill spheres) is unachievable. The next step in this direction demands from near to mid-infrared interferometry to jump from $sim$100 m baselines to $sim$1 km, and from very few telescopes (two to six) to 20 or more (PFI like concepts, Monnier et al. 2018). This transition needs for more affordable near to mid-infrared telescopes to be designed. Since the driving cost for such telescopes resides on the primary mirror, in particular scaling with its diameter and weight, our approach to tackle this problem relies on the production of low-cost light mirrors.
The ExTrA facility, located at La Silla observatory, will consist of a near-infrared multi-object spectrograph fed by three 60-cm telescopes. ExTrA will add the spectroscopic resolution to the traditional differential photometry method. This shall enable the fine correction of color-dependent systematics that would otherwise hinder ground-based observations. With both this novel method and an infrared-enabled efficiency, ExTrA aims to find transiting telluric planets orbiting in the habitable zone of bright nearby M dwarfs. It shall have the versatility to do so by running its own independent survey and also by concurrently following-up on the space candidates unveiled by K2 and TESS. The exoplanets detected by ExTrA will be amenable to atmospheric characterisation with VLTs, JWST, and ELTs and could give our first peek into an exo-life laboratory.
The installation and operation of a telescope in Antarctica represent particular challenges, in particular the requirement to operate at extremely cold temperatures, to cope with rapid temperature fluctuations and to prevent frosting. Heating of electronic subsystems is a necessity, but solutions must be found to avoid the turbulence induced by temperature fluctua- tions on the optical paths. ASTEP 400 is a 40 cm Newton telescope installed at the Concordia station, Dome C since 2010 for photometric observations of fields of stars and their exoplanets. While the telescope is designed to spread star light on several pixels to maximize photometric stability, we show that it is nonetheless sensitive to the extreme variations of the seeing at the ground level (between about 0.1 and 5 arcsec) and to temperature fluctuations between --30 degrees C and --80 degrees C. We analyze both day-time and night-time observations and obtain the magnitude of the seeing caused by the mirrors, dome and camera. The most important effect arises from the heating of the primary mirror which gives rise to a mirror seeing of 0.23 arcsec K--1 . We propose solutions to mitigate these effects.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
