Do you want to publish a course? Click here

The effects of frequency-dependent quasar variability on the celestial reference frame

125   0   0.0 ( 0 )
 Added by Stanislav Shabala
 Publication date 2013
  fields Physics
and research's language is English




Ask ChatGPT about the research

We examine the relationship between source position stability and astrophysical properties of radio-loud quasars making up the International Celestial Reference Frame. Understanding this relationship is important for improving quasar selection and analysis strategies, and therefore reference frame stability. We construct light curves for 95 of the most frequently observed ICRF2 quasars at both the 2.3 and 8.4 GHz geodetic VLBI observing bands. Because the appearance of new quasar components corresponds to an increase in quasar flux density, these light curves alert us to potential changes in source structure before they appear in VLBI images. We test how source position stability depends on three astrophysical parameters: (1) Flux density variability at X-band; (2) Time lag between flares in S and X-bands; (3) Spectral index rms, defined as the variability in the ratio between S and X-band flux densities. We find that small time lags between S and X-band light curves, and low spectral index variability, are good indicators of position stability. On the other hand, there is no strong dependence of source position stability on flux density variability in a single frequency band. These findings can be understood by interpreting the time lag between S and X-band light curves as a measure of the size of the source structure. Monitoring of source flux density at multiple frequencies therefore appears to provide a useful probe of quasar structure on scales important to geodesy. We show how multi-frequency flux density monitoring may allow the dependence on frequency of the relative core positions along the jet to be elucidated. Knowledge of the position-frequency relation has important implications for current and future geodetic VLBI programs, as well as the alignment between the radio and optical celestial reference frames. (Abridged)



rate research

Read More

Astrometry, the measurement of positions and motions of the stars, is one of the oldest disciplines in Astronomy, extending back at least as far as Hipparchus discovery of the precession of Earths axes in 190 BCE by comparing his catalog with those of his predecessors. Astrometry is fundamental to Astronomy, and critical to many aspects of Astrophysics and Geodesy. In order to understand our planets and solar systems context within their surroundings, we must be able to to define, quantify, study, refine, and maintain an inertial frame of reference relative to which all positions and motions can be unambiguously and self-consistently described. It is only by using this inertial reference frame that we are able to disentangle our observations of the motions of celestial objects from our own complex path around our star, and its path through the galaxy, and the local group. Every aspect of each area outlined in the call for scientific frontiers in astronomy in the era of the 2020-2030 timeframe will depend on the quality of the inertial reference frame. In this white paper, we propose support for development of radio Very Long Baseline Interferometry (VLBI) capabilities, including the Next Generation Very Large Array (ngVLA), a radio astronomy observatory that will not only support development of a next generation reference frame of unprecedented accuracy, but that will also serve as a highly capable astronomical instrument in its own right. Much like its predecessors, the Very Long Baseline Array (VLBA) and other VLBI telescopes, the proposed ngVLA will provide the foundation for the next three decades for the fundamental reference frame, benefitting astronomy, astrophysics, and geodesy alike.
The second release of Gaia data (Gaia DR2) contains the astrometric parameters for more than half a million quasars. This set defines a kinematically non-rotating reference frame in the optical domain referred to as the Gaia-CRF2. The Gaia-CRF2 is the first realisation of a non-rotating global optical reference frame that meets the ICRS prescriptions, meaning that it is built only on extragalactic sources. It consists of the positions of a sample of 556 869 sources in Gaia DR2, obtained from a positional cross-match with the ICRF3-prototype and AllWISE AGN catalogues. The sample constitutes a clean, dense, and homogeneous set of extragalactic point sources in the magnitude range G from 16 to 21 mag with accurately known optical positions. The median positional uncertainty is 0.12 mas for G < 18 mag and 0.5 mas at G = 20 mag. Large-scale systematics are estimated to be in the range 20 to 30 muas. The accuracy claims are supported by the parallaxes and proper motions of the quasars in Gaia DR2. The optical positions for a subset of 2820 sources in common with the ICRF3-prototype show very good overall agreement with the radio positions, but several tens of sources have significantly discrepant positions.
The third iteration of the International Celestial Reference Frame (ICRF3) is made up of 4536 quasars observed at S/X bands using Very Long baseline Interferometry (VLBI). These sources are high redshift quasars, typically between $1<z<2$, that are believed to host active galactic nuclei (AGN) at their centers. The position of compact radio sources can be determined better than sources with large amounts of extended radio structure. Here we report information on a series of 20 observations from January 2017 through December 2017 which were designed for precise astrometry and to monitor the structure of sources included in the ICRF3. We targeted 3627 sources over the one year campaign and found the median flux density of 2697 detected sources at S-band is 0.13 Jy, and the flux density of 3209 sources detected at X-band is 0.09 Jy. We find that $70%$ of detected sources in our campaign are considered compact at X-band and ideal for use in the ICRF and $89%$ of the 2615 sources detected at both frequencies have a flat spectral index, $alpha>0.5$
The goal of this presentation is to report the latest progress in creation of the next generation of VLBI-based International Celestial Reference Frame, ICRF3. Two main directions of ICRF3 development are improvement of the S/X-band frame and extension of the ICRF to higher frequencies. Another important task of this work is the preparation for comparison of ICRF3 with the new generation optical frame GCRF expected by the end of the decade as a result of the Gaia mission.
The large number and all-sky distribution of quasars from different surveys, along with their presence in large, deep astrometric catalogs,enables the building of an optical materialization of the ICRS following its defining principles. Namely: that it is kinematically non-rotating with respect to the ensemble of distant extragalactic objects; aligned with the mean equator and dynamical equinox of J2000; and realized by a list of adopted coordinates of extragalatic sources. Starting from the updated and presumably complete LQAC list of QSOs, the initial optical positions of those quasars are found in the USNO B1.0 and GSC2.3 catalogs, and from the SDSS DR5. The initial positions are next placed onto UCAC2-based reference frames, following by an alignment with the ICRF, to which were added the most precise sources from the VLBA calibrator list and the VLA calibrator list - when reliable optical counterparts exist. Finally, the LQRF axes are inspected through spherical harmonics, contemplating to define right ascension, declination and magnitude terms. The LQRF contains J2000 referred equatorial coordinates for 100,165 quasars, well represented across the sky, from -83.5 to +88.5 degrees in declination, and with 10 arcmin being the average distance between adjacent elements. The global alignment with the ICRF is 1.5 mas, and the individual position accuracies are represented by a Poisson distribution that peaks at 139 mas in right ascension and 130 mas in declination. It is complemented by redshift and photometry information from the LQAC. The LQRF is designed to be an astrometric frame, but it is also the basis for the GAIA mission initial quasars list, and can be used as a test bench for quasars space distribution and luminosity function studies.
comments
Fetching comments Fetching comments
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا