Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSuperlubricity through graphene multilayers between Ni(111) surfaces
151
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A single graphene layer placed between two parallel Ni(111) surfaces screens the strong attractive force and results in a significant reduction of adhesion and sliding friction. When two graphene layers are inserted, each graphene is attached to one of the metal surfaces with a significant binding and reduces the adhesion further. In the sliding motion of these surfaces the transition from stick-slip to continuous sliding is attained, whereby non-equilibrium phonon generation through sudden processes is suppressed. The adhesion and corrugation strength continues to decrease upon insertion of the third graphene layer and eventually saturates at a constant value with increasing number of graphene layers. In the absence of Ni surfaces, the corrugation strength of multilayered graphene is relatively higher and practically independent of the number of layers. Present first-principles calculations reveal the superlubricant feature of graphene layers placed between pseudomorphic Ni(111) surfaces, which is achieved through the coupling of Ni-3d and graphene-$pi$ orbitals. The effect of graphene layers inserted between a pair of parallel Cu(111) and Al(111) surfaces are also discussed. The treatment of sliding friction under the constant loading force, by taking into account the deformations corresponding to any relative positions of sliding slabs, is the unique feature of our study.
rate research
Read More
We have investigated the magnetism of the bare and graphene-covered (111) surface of a Ni single crystal employing three different magnetic imaging techniques and ab initio calculations, covering length scales from the nanometer regime up to several millimeters. With low temperature spinpolarized scanning tunneling microscopy (SP-STM) we find domain walls with widths of 60 - 90 nm, which can be moved by small perpendicular magnetic fields. Spin contrast is also achieved on the graphene-covered surface, which means that the electron density in the vacuum above graphene is substantially spin-polarized. In accordance with our ab initio calculations we find an enhanced atomic corrugation with respect to the bare surface, due to the presence of the carbon pz orbitals and as a result of the quenching of Ni surface states. The latter also leads to an inversion of spinpolarization with respect to the pristine surface. Room temperature Kerr microscopy shows a stripe like domain pattern with stripe widths of 3 - 6 {mu}m. Applying in-plane-fields, domain walls start to move at about 13 mT and a single domain state is achieved at 140 mT. Via scanning electron microscopy with polarization analysis (SEMPA) a second type of modulation within the stripes is found and identified as 330 nm wide V-lines. Qualitatively, the observed surface domain pattern originates from bulk domains and their quasi-domain branching is driven by stray field reduction.
We report on total-energy electronic structure calculations in the density-functional theory performed for the ultra-thin atomic layers of Si on Ag(111) surfaces. We find several distinct stable silicene structures: $sqrt{3}timessqrt{3}$, $3times3$, $sqrt{7}timessqrt{7}$ with the thickness of Si increasing from monolayer to quad-layer. The structural bistability and tristability of the multilayer silicene structures on Ag surfaces are obtained, where the calculated transition barriers infer the occurrence of the flip-flop motion at low temperature. The calculated STM images agree well with the experimental observations. We also find the stable existence of $2times1$ $pi$-bonded chain and $7times7$ dimer-adatom-stacking fault Si(111)-surface structures on Ag(111), which clearly shows the crossover of silicene-silicon structures for the multilayer Si on Ag surfaces. We further find the absence of the Dirac states for multilayer silicene on Ag(111) due to the covalent interactions of silicene-Ag interface and Si-Si interlayer. Instead, we find a new state near Fermi level composed of $pi$ orbitals locating on the surface layer of $sqrt{3}timessqrt{3}$ multilayer silicene, which satisfies the hexagonal symmetry and exhibits the linear energy dispersion. By examining the electronic properties of $2times1$ $pi$-bonded chain structures, we find that the surface-related $pi$ states of multilayer Si structures are robust on Ag surfaces.
The advent of topological phases of matter revealed a variety of observed boundary phenomena, such as chiral and helical modes found at the edges of two-dimensional (2D) topological insulators. Antichiral states in 2D semimetals, i.e., copropagating edge modes on opposite edges compensated by a counterpropagating bulk current, are also predicted, but, to date, no realization of such states in a solid-state system has been found. Here, we put forward a procedure to realize antichiral states in twisted van der Waals multilayers, by combining the electronic Dirac-cone spectra of each layer through the combination of the orbital moire superstructure, an in-plane magnetic field, and inter-layer bias voltage. In particular, we demonstrate that a twisted van der Waals heterostructure consisting of graphene/two layers of hexagonal boron nitride [(hBN)$_2$]/graphene will show antichiral states at in-plane magnetic fields of 8 T, for a rotation angle of 0.2$^{circ}$ between the graphene layers. Our findings engender a controllable procedure to engineer antichiral states in solid-state systems, as well as in quantum engineered metamaterials.
Colloidal probe Atomic Force Microscopy (AFM) allows to explore sliding states of vanishing friction, i.e. superlubricity, in mesoscopic graphite contacts. In this respect, superlubricity is known to appear upon formation of a triboinduced transfer layer, originated by material transfer of graphene flakes from the graphitic substrate to the colloidal probe. It was suggested that friction vanishes due to crystalline incommensurability at the sliding interface thus formed. However several details are missing, including the roles of tribolayer roughness and of loading conditions. Hereafter we gain deeper insight into the tribological response of micrometric silica beads sliding on graphite under ambient conditions. We show that the tribotransferred flakes increase interfacial roughness from tenths to several nanometers, in fact causing a breakdown of adhesion and friction by one order of magnitude. Furthermore, they behave as protruding asperities dissipating mechanical energy via atomic-scale stick-slip instabilities. Remarkably, such contact junctions can undergo a load-driven transition from continuous superlubric sliding to dissipative stick-slip, that agrees with the single-asperity Prandtl-Tomlinson model. Our results indicate that friction at mesoscopic silica-graphite junctions depends on the specific energy landscape experienced by the topographically-highest triboinduced nanoasperity. Superlubricity may arise from the load-controlled competition between interfacial crystalline incommensurability and contact pinning effects.
We formulate the chiral decomposition rules that govern the electronic structure of a broad family of twisted $N+M$ multilayer graphene configurations that combine arbitrary stacking order and a mutual twist. We show that at the magic angle in the chiral limit the low-energy bands of such systems are composed of chiral pseudospin doublets which are energetically entangled with two flat bands per valley induced by the moire superlattice potential. The analytic analysis is supported by explicit numerical calculations based on realistic parameterization. We further show that applying vertical displacement fields can open up energy gaps between the pseudospin doublets and the two flat bands, such that the flat bands may carry nonzero valley Chern numbers. These results provide guidelines for the rational design of various topological and correlated states in generic twisted graphene multilayers.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
