Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userThe SDSS-III Baryon Oscillation Spectroscopic Survey: The Quasar Luminosity Function from Data Release Nine
266
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We present a new measurement of the optical Quasar Luminosity Function (QLF), using data from the Sloan Digital Sky Survey-III: Baryon Oscillation Spectroscopic Survey (SDSS-III: BOSS). From the SDSS-III Data Release Nine (DR9), we select a uniform sample of 22,301 i<=21.8 quasars over an area of 2236 sq. deg with confirmed spectroscopic redshifts between 2.2<z<3.5, filling in a key part of the luminosity-redshift plane for optical quasar studies. We derive the completeness of the survey through simulated quasar photometry, and check this completeness estimate using a sample of quasars selected by their photometric variability within the BOSS footprint. We investigate the level of systematics associated with our quasar sample using the simulations, in the process generating color-redshift relations and a new quasar k-correction. We probe the faint end of the QLF to M_i(z=2.2) = -24.5 and see a clear break in the QLF at all redshifts up to z=3.5. We find that a log-linear relation (in log[Phi*] - M*) for a luminosity and density evolution (LEDE) model adequately describes our data within the range 2.2<z<3.5; across this interval the break luminosity increases by a factor of ~2.3 while Phi* declines by a factor of ~6. At z<2.2 our data is reasonably well fit by a pure luminosity evolution (PLE) model. We see only a weak signature of AGN downsizing, in line with recent studies of the hard X-ray luminosity function. We compare our measured QLF to a number of theoretical models and find that models making a variety of assumptions about quasar triggering and halo occupation can fit our data over a wide range of redshifts and luminosities.
rate research
Read More
The SDSS-III Baryon Oscillation Spectroscopic Survey (BOSS), a five-year spectroscopic survey of 10,000 deg^2, achieved first light in late 2009. One of the key goals of BOSS is to measure the signature of baryon acoustic oscillations in the distribution of Ly-alpha absorption from the spectra of a sample of ~150,000 z>2.2 quasars. Along with measuring the angular diameter distance at zapprox2.5, BOSS will provide the first direct measurement of the expansion rate of the Universe at z > 2. One of the biggest challenges in achieving this goal is an efficient target selection algorithm for quasars over 2.2 < z < 3.5, where their colors overlap those of stars. During the first year of the BOSS survey, quasar target selection methods were developed and tested to meet the requirement of delivering at least 15 quasars deg^-2 in this redshift range, out of 40 targets deg^-2. To achieve these surface densities, the magnitude limit of the quasar targets was set at g <= 22.0 or r<=21.85. While detection of the BAO signature in the Ly-alpha absorption in quasar spectra does not require a uniform target selection, many other astrophysical studies do. We therefore defined a uniformly-selected subsample of 20 targets deg^-2, for which the selection efficiency is just over 50%. This CORE subsample will be fixed for Years Two through Five of the survey. In this paper we describe the evolution and implementation of the BOSS quasar target selection algorithms during the first two years of BOSS operations. We analyze the spectra obtained during the first year. 11,263 new z>2.2 quasars were spectroscopically confirmed by BOSS. Our current algorithms select an average of 15 z > 2.2 quasars deg^-2 from 40 targets deg^-2 using single-epoch SDSS imaging. Multi-epoch optical data and data at other wavelengths can further improve the efficiency and completeness of BOSS quasar target selection. [Abridged]
The Baryon Oscillation Spectroscopic Survey (BOSS) is designed to measure the scale of baryon acoustic oscillations (BAO) in the clustering of matter over a larger volume than the combined efforts of all previous spectroscopic surveys of large scale structure. BOSS uses 1.5 million luminous galaxies as faint as i=19.9 over 10,000 square degrees to measure BAO to redshifts z<0.7. Observations of neutral hydrogen in the Lyman alpha forest in more than 150,000 quasar spectra (g<22) will constrain BAO over the redshift range 2.15<z<3.5. Early results from BOSS include the first detection of the large-scale three-dimensional clustering of the Lyman alpha forest and a strong detection from the Data Release 9 data set of the BAO in the clustering of massive galaxies at an effective redshift z = 0.57. We project that BOSS will yield measurements of the angular diameter distance D_A to an accuracy of 1.0% at redshifts z=0.3 and z=0.57 and measurements of H(z) to 1.8% and 1.7% at the same redshifts. Forecasts for Lyman alpha forest constraints predict a measurement of an overall dilation factor that scales the highly degenerate D_A(z) and H^{-1}(z) parameters to an accuracy of 1.9% at z~2.5 when the survey is complete. Here, we provide an overview of the selection of spectroscopic targets, planning of observations, and analysis of data and data quality of BOSS.
We describe mock data-sets generated to simulate the high-redshift quasar sample in Data Release 11 (DR11) of the SDSS-III Baryon Oscillation Spectroscopic Survey (BOSS). The mock spectra contain Ly{alpha} forest correlations useful for studying the 3D correlation function including Baryon Acoustic Oscillations (BAO). They also include astrophysical effects such as quasar continuum diversity and high-density absorbers, instrumental effects such as noise and spectral resolution, as well as imperfections introduced by the SDSS pipeline treatment of the raw data. The Ly{alpha} forest BAO analysis of the BOSS collaboration, described in Delubac et al. 2014, has used these mock data-sets to develop and cross-check analysis procedures prior to performing the BAO analysis on real data, and for continued systematic cross checks. Tests presented here show that the simulations reproduce sufficiently well important characteristics of real spectra. These mock data-sets will be made available together with the data at the time of the Data Release 11.
The SDSS-IV/eBOSS has an extensive quasar program that combines several selection methods. Among these, the photometric variability technique provides highly uniform samples, unaffected by the redshift bias of traditional optical-color selections, when $z= 2.7 - 3.5$ quasars cross the stellar locus or when host galaxy light affects quasar colors at $z < 0.9$. Here, we present the variability selection of quasars in eBOSS, focusing on a specific program that led to a sample of 13,876 quasars to $g_{rm dered}=22.5$ over a 94.5 deg$^2$ region in Stripe 82, an areal density 1.5 times higher than over the rest of the eBOSS footprint. We use these variability-selected data to provide a new measurement of the quasar luminosity function (QLF) in the redshift range $0.68<z<4.0$. Our sample is denser, reaches deeper than those used in previous studies of the QLF, and is among the largest ones. At the faint end, our QLF extends to $M_g(z!=!2)=-21.80$ at low redshift and to $M_g(z!=!2)=-26.20$ at $zsim 4$. We fit the QLF using two independent double-power-law models with ten free parameters each. The first model is a pure luminosity-function evolution (PLE) with bright-end and faint-end slopes allowed to be different on either side of $z=2.2$. The other is a simple PLE at $z<2.2$, combined with a model that comprises both luminosity and density evolution (LEDE) at $z>2.2$. Both models are constrained to be continuous at $z=2.2$. They present a flattening of the bright-end slope at large redshift. The LEDE model indicates a reduction of the break density with increasing redshift, but the evolution of the break magnitude depends on the parameterization. The models are in excellent accord, predicting quasar counts that agree within 0.3% (resp., 1.1%) to $g<22.5$ (resp., $g<23$). The models are also in good agreement over the entire redshift range with models from previous studies.
We determine the number counts and z=0-5 luminosity function for a well-defined, homogeneous sample of quasars from the Sloan Digital Sky Survey (SDSS). We conservatively define the most uniform statistical sample possible, consisting of 15,343 quasars within an effective area of 1622 deg^2 that was derived from a parent sample of 46,420 spectroscopically confirmed broad-line quasars in the 5282 deg^2 of imaging data from SDSS Data Release Three. The sample extends from i=15 to i=19.1 at z<3 and to i=20.2 for z>3. The number counts and luminosity function agree well with the results of the 2dF QSO Survey, but the SDSS data probe to much higher redshifts than does the 2dF sample. The number density of luminous quasars peaks between redshifts 2 and 3, although uncertainties in the selection function in this range do not allow us to determine the peak redshift more precisely. Our best fit model has a flatter bright end slope at high redshift than at low redshift. For z<2.4 the data are best fit by a redshift-independent slope of beta = -3.1 (Phi(L) propto L^beta). Above z=2.4 the slope flattens with redshift to beta=-2.37 at z=5. This slope change, which is significant at a >5-sigma level, must be accounted for in models of the evolution of accretion onto supermassive black holes.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
